Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
S-1000N33-I4T1G

S-1000N33-I4T1G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Efficiency
  • Package: TO-263-5L (D2PAK)
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V - 18V
  • Output Voltage: 3.3V
  • Output Current: 1A
  • Dropout Voltage: 0.15V @ 1A
  • Quiescent Current: 80µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The S-1000N33-I4T1G has a five-pin configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. VOUT: Output voltage pin 5. NC: No connection pin

Functional Features

  • Low dropout voltage ensures efficient power conversion
  • Stable output voltage regardless of input voltage fluctuations
  • Built-in overcurrent protection for enhanced safety
  • Thermal shutdown protection prevents overheating
  • Fast transient response for rapid load changes

Advantages

  • High efficiency leads to reduced power dissipation
  • Compact package size allows for space-saving designs
  • Wide input voltage range accommodates various power sources
  • Excellent line and load regulation for reliable performance
  • Robust protection features enhance system reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to non-regulated voltage sources
  • Requires external capacitors for stability

Working Principles

The S-1000N33-I4T1G is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The dropout voltage is minimized to ensure efficient power conversion.

Detailed Application Field Plans

The S-1000N33-I4T1G finds applications in various electronic devices, including: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

  1. S-1000N33-M5T1G: Similar specifications but in a different package (SOT-23-5)
  2. S-1000N33-Q5T1G: Higher output current (1.5A) with the same package (TO-263-5L)
  3. S-1000N33-R4T1G: Lower quiescent current (50µA) with the same package (TO-263-5L)

This concludes the encyclopedia entry for the S-1000N33-I4T1G voltage regulator.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af S-1000N33-I4T1G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of S-1000N33-I4T1G in technical solutions:

1. What is S-1000N33-I4T1G? - S-1000N33-I4T1G is a specific model of voltage regulator IC (integrated circuit) that provides a regulated output voltage of 3.3V.

2. What are the typical applications of S-1000N33-I4T1G? - S-1000N33-I4T1G is commonly used in various technical solutions where a stable 3.3V power supply is required, such as microcontrollers, sensors, and other low-power electronic devices.

3. What is the input voltage range for S-1000N33-I4T1G? - The input voltage range for S-1000N33-I4T1G is typically between 4.5V and 18V.

4. What is the maximum output current of S-1000N33-I4T1G? - The maximum output current of S-1000N33-I4T1G is 1A (Amperes).

5. Does S-1000N33-I4T1G require any external components for operation? - Yes, S-1000N33-I4T1G requires a few external components like capacitors for stability and filtering purposes. The datasheet provides recommended values and configurations.

6. Is S-1000N33-I4T1G capable of handling overcurrent or short-circuit conditions? - S-1000N33-I4T1G has built-in protection features like overcurrent and short-circuit protection, which help safeguard the IC and the connected circuitry.

7. Can S-1000N33-I4T1G operate in high-temperature environments? - S-1000N33-I4T1G has a specified operating temperature range, typically between -40°C and +85°C. It is designed to work reliably within this temperature range.

8. What is the dropout voltage of S-1000N33-I4T1G? - The dropout voltage of S-1000N33-I4T1G is typically around 0.6V. This means that the input voltage must be at least 0.6V higher than the desired output voltage for proper regulation.

9. Can S-1000N33-I4T1G be used in battery-powered applications? - Yes, S-1000N33-I4T1G can be used in battery-powered applications as long as the input voltage remains within the specified range and the current requirements are within its maximum output capability.

10. Are there any specific precautions to consider when using S-1000N33-I4T1G? - It is important to follow the manufacturer's guidelines and recommendations provided in the datasheet. Pay attention to input/output voltage limits, thermal considerations, and component selection to ensure reliable operation.