ABLIC U.S.A. Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
S-80122ANPF-JCHTFG
Se detaljer DataSheets

S-80122ANPF-JCHTFG

Product Overview

Category

S-80122ANPF-JCHTFG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

The S-80122ANPF-JCHTFG IC comes in a small form factor package, typically a surface mount package (SMD). The specific package type may vary depending on the manufacturer.

Essence

The essence of the S-80122ANPF-JCHTFG IC lies in its ability to regulate voltage and manage power efficiently, making it an essential component in various electronic devices.

Packaging/Quantity

The IC is usually packaged in reels or tubes, with quantities varying based on the manufacturer's specifications. Common packaging options include tape and reel packaging, where the ICs are placed in a continuous strip within a reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-80122ANPF-JCHTFG IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. EN (Enable)
  5. FB (Feedback)

Functional Features

  • Voltage regulation: The IC ensures a stable output voltage within the specified range, regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste and extending battery life in portable devices.
  • Enable pin: The EN pin allows for easy control of the IC's operation, enabling or disabling the voltage regulation function as needed.
  • Feedback mechanism: The FB pin provides feedback to the IC, allowing it to adjust the output voltage based on load conditions.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained electronic devices.
  • Efficient power management helps extend battery life.
  • Wide input and output voltage ranges provide versatility in various applications.
  • Low quiescent current minimizes power consumption during standby mode.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Temperature range limitations restrict usage in extreme environments.

Working Principles

The S-80122ANPF-JCHTFG IC operates based on a feedback control mechanism. It continuously monitors the output voltage through the FB pin and adjusts the internal circuitry to maintain a stable output voltage within the specified range. The enable pin (EN) allows for easy control of the IC's operation, enabling or disabling the voltage regulation function as required.

Detailed Application Field Plans

The S-80122ANPF-JCHTFG IC finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-80122BNPF-JCHTFG
  2. S-80122CNPF-JCHTFG
  3. S-80122DNPF-JCHTFG
  4. S-80122ENPF-JCHTFG
  5. S-80122FNPF-JCHTFG

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Note: The above information is based on general specifications and may vary depending on the manufacturer and specific product version.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af S-80122ANPF-JCHTFG i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of S-80122ANPF-JCHTFG in technical solutions:

  1. Q: What is S-80122ANPF-JCHTFG? A: S-80122ANPF-JCHTFG is a specific model number of a component or device used in technical solutions.

  2. Q: What are the typical applications of S-80122ANPF-JCHTFG? A: S-80122ANPF-JCHTFG can be used in various technical solutions such as power management, voltage regulation, or control systems.

  3. Q: What is the operating voltage range of S-80122ANPF-JCHTFG? A: The operating voltage range of S-80122ANPF-JCHTFG is typically between X volts and Y volts.

  4. Q: Can S-80122ANPF-JCHTFG handle high currents? A: Yes, S-80122ANPF-JCHTFG is designed to handle high currents up to Z amps.

  5. Q: Is S-80122ANPF-JCHTFG compatible with microcontrollers? A: Yes, S-80122ANPF-JCHTFG can be easily integrated with microcontrollers and other digital control systems.

  6. Q: Does S-80122ANPF-JCHTFG have built-in protection features? A: Yes, S-80122ANPF-JCHTFG often includes built-in protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: What is the typical efficiency of S-80122ANPF-JCHTFG? A: The typical efficiency of S-80122ANPF-JCHTFG is around X%, ensuring minimal power loss during operation.

  8. Q: Can S-80122ANPF-JCHTFG operate in extreme temperature conditions? A: Yes, S-80122ANPF-JCHTFG is designed to operate reliably in a wide range of temperature conditions, including extreme temperatures.

  9. Q: Are there any specific design considerations when using S-80122ANPF-JCHTFG? A: It is important to consider factors such as input/output voltage requirements, load characteristics, and thermal management when designing with S-80122ANPF-JCHTFG.

  10. Q: Where can I find more detailed technical specifications for S-80122ANPF-JCHTFG? A: You can refer to the datasheet or product documentation provided by the manufacturer for detailed technical specifications of S-80122ANPF-JCHTFG.

Please note that the specific details mentioned in the answers may vary depending on the actual specifications of S-80122ANPF-JCHTFG.