S-80915CLPF-G6KTFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80915CLPF-G6KTFG is packaged in a SOT-23-5 package. Each package contains one unit of the IC.
The essence of S-80915CLPF-G6KTFG lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
The S-80915CLPF-G6KTFG is supplied in tape and reel packaging, with 3000 units per reel.
The S-80915CLPF-G6KTFG has a total of five pins:
The S-80915CLPF-G6KTFG operates based on a voltage divider network connected to the TH pin. By adjusting the voltage at this pin, the threshold voltage for voltage detection can be set. When the input voltage drops below the threshold, the internal comparator triggers the reset circuit, pulling the RESET pin low. The built-in delay circuit ensures that the reset signal remains active for a specific duration after the voltage rises above the threshold.
The S-80915CLPF-G6KTFG finds applications in various electronic devices where accurate voltage detection and reset functions are required. Some potential application fields include:
These alternative models offer different features and specifications to cater to diverse application requirements.
Word count: 536 words
Sure! Here are 10 common questions and answers related to the application of S-80915CLPF-G6KTFG in technical solutions:
Question: What is the operating voltage range of S-80915CLPF-G6KTFG?
Answer: The operating voltage range of S-80915CLPF-G6KTFG is 2.0V to 5.5V.
Question: What is the typical quiescent current consumption of this device?
Answer: The typical quiescent current consumption of S-80915CLPF-G6KTFG is 1.0µA.
Question: Can S-80915CLPF-G6KTFG be used as a reset IC in microcontroller-based systems?
Answer: Yes, S-80915CLPF-G6KTFG can be used as a reset IC in microcontroller-based systems.
Question: What is the output voltage threshold of S-80915CLPF-G6KTFG?
Answer: The output voltage threshold of S-80915CLPF-G6KTFG is typically 4.65V.
Question: Is S-80915CLPF-G6KTFG suitable for battery-powered applications?
Answer: Yes, S-80915CLPF-G6KTFG is suitable for battery-powered applications due to its low quiescent current.
Question: Can S-80915CLPF-G6KTFG be used in automotive electronics?
Answer: Yes, S-80915CLPF-G6KTFG is AEC-Q100 qualified and can be used in automotive electronics.
Question: Does S-80915CLPF-G6KTFG have built-in hysteresis?
Answer: Yes, S-80915CLPF-G6KTFG has built-in hysteresis to prevent output oscillation.
Question: What is the maximum supply voltage that S-80915CLPF-G6KTFG can handle?
Answer: The maximum supply voltage that S-80915CLPF-G6KTFG can handle is 6.0V.
Question: Can S-80915CLPF-G6KTFG be used in industrial control systems?
Answer: Yes, S-80915CLPF-G6KTFG can be used in industrial control systems due to its wide operating temperature range (-40°C to +85°C).
Question: Does S-80915CLPF-G6KTFG have a manual reset input?
Answer: No, S-80915CLPF-G6KTFG does not have a manual reset input. It operates based on the monitored voltage level.
Please note that these answers are general and may vary depending on the specific application requirements.