S-8264BAA-I8T1U
Product Overview
Category
S-8264BAA-I8T1U belongs to the category of voltage regulators.
Use
This product is commonly used for regulating and stabilizing voltage levels in electronic devices.
Characteristics
- Voltage regulation: The S-8264BAA-I8T1U ensures a stable output voltage, preventing fluctuations that could damage sensitive components.
- Low power consumption: This voltage regulator operates with minimal power consumption, making it suitable for battery-powered devices.
- Compact package: The S-8264BAA-I8T1U comes in a small form factor, allowing for easy integration into various electronic systems.
- High efficiency: This voltage regulator offers high conversion efficiency, minimizing energy loss during voltage regulation.
- Overcurrent protection: The S-8264BAA-I8T1U includes built-in overcurrent protection, safeguarding connected devices from excessive current flow.
Package and Quantity
The S-8264BAA-I8T1U is typically packaged in a surface-mount package (SOT-23-5) and is available in reels or tape and reel packaging. Each reel contains a specific quantity of voltage regulators, usually 3000 units.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage options: 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
- Output current: Up to 100mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 30μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
The S-8264BAA-I8T1U has five pins, each serving a specific function:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin (active high)
- BP: Bypass pin for low-power mode
Functional Features
- Low-power mode: The S-8264BAA-I8T1U includes a bypass pin (BP) that allows the device to enter a low-power mode, reducing power consumption when not in use.
- Overcurrent protection: This voltage regulator incorporates overcurrent protection, automatically shutting down if the output current exceeds its specified limit.
- Thermal shutdown: In case of excessive temperature rise, the S-8264BAA-I8T1U activates thermal shutdown to prevent damage to the device and connected components.
Advantages and Disadvantages
Advantages
- Stable output voltage regulation
- Low power consumption
- Compact form factor
- High conversion efficiency
- Built-in overcurrent protection
Disadvantages
- Limited output current capacity (up to 100mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
The S-8264BAA-I8T1U operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a stable output voltage, regardless of any fluctuations in the input voltage. This is achieved by using internal circuitry that adjusts the voltage difference between the input and output, ensuring a constant output voltage.
Detailed Application Field Plans
The S-8264BAA-I8T1U finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable technology - Medical devices - Industrial control systems
Detailed and Complete Alternative Models
- S-8264AAA-I8T1U
- S-8264CAA-I8T1U
- S-8264DAA-I8T1U
- S-8264EAA-I8T1U
- S-8264FAA-I8T1U
These alternative models offer similar functionality and characteristics to the S-8264BAA-I8T1U, providing options for different voltage requirements or specific application needs.
In conclusion, the S-8264BAA-I8T1U is a voltage regulator that offers stable output voltage regulation, low power consumption, and compact packaging. It is suitable for various electronic devices and provides advantages such as high efficiency and overcurrent protection. However, it has limitations in terms of output current capacity and input voltage range.
Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af S-8264BAA-I8T1U i tekniske løsninger
Sure! Here are 10 common questions and answers related to the application of S-8264BAA-I8T1U in technical solutions:
Q1: What is S-8264BAA-I8T1U? A1: S-8264BAA-I8T1U is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of S-8264BAA-I8T1U? A2: The operating voltage range of S-8264BAA-I8T1U is typically between 0.9V and 6.0V.
Q3: How does S-8264BAA-I8T1U detect voltage levels? A3: S-8264BAA-I8T1U uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold voltage.
Q4: What is the purpose of using S-8264BAA-I8T1U in technical solutions? A4: S-8264BAA-I8T1U is commonly used as a power supply monitoring device to ensure stable operation of electronic systems by detecting low voltage conditions.
Q5: Can S-8264BAA-I8T1U be used in battery-powered applications? A5: Yes, S-8264BAA-I8T1U can be used in battery-powered applications as it operates within a wide voltage range and consumes very low power.
Q6: Does S-8264BAA-I8T1U have any built-in protection features? A6: Yes, S-8264BAA-I8T1U has built-in overvoltage detection and reverse voltage protection features to safeguard the connected circuitry.
Q7: What is the output configuration of S-8264BAA-I8T1U? A7: S-8264BAA-I8T1U provides an open-drain output, which requires an external pull-up resistor to obtain a logic-level signal.
Q8: Can S-8264BAA-I8T1U be used in automotive applications? A8: Yes, S-8264BAA-I8T1U is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Q9: How accurate is the voltage detection of S-8264BAA-I8T1U? A9: The voltage detection accuracy of S-8264BAA-I8T1U is typically within ±2%.
Q10: Is S-8264BAA-I8T1U available in different package options? A10: Yes, S-8264BAA-I8T1U is available in various package options, including SOT-23-5 and USP-6C.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.