Allegro MicroSystems, LLC
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
L6219DSTR-T
Se detaljer DataSheets

L6219DSTR-T

Product Overview

Category

L6219DSTR-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a motor driver for controlling and driving various types of motors.

Characteristics

  • Integrated circuit
  • Motor driver
  • Suitable for different motor types
  • High efficiency
  • Low power consumption

Package

L6219DSTR-T is available in a small surface mount package, typically in a 24-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of L6219DSTR-T lies in its ability to provide efficient and reliable motor control, making it an essential component in many electronic devices and systems.

Packaging/Quantity

L6219DSTR-T is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel or tube.

Specifications

  • Supply voltage: 8V to 52V
  • Output current: Up to 1.5A per phase
  • Operating temperature range: -40°C to +150°C
  • Logic inputs compatible with TTL/CMOS
  • Built-in protection features (thermal shutdown, overcurrent detection)

Detailed Pin Configuration

L6219DSTR-T has a total of 24 pins, which are assigned specific functions. The pin configuration is as follows:

  1. VREF
  2. OUT1
  3. OUT2
  4. GND
  5. VCC
  6. SENSE1
  7. SENSE2
  8. SENSE3
  9. SENSE4
  10. SENSE5
  11. SENSE6
  12. SENSE7
  13. SENSE8
  14. SENSE9
  15. SENSE10
  16. SENSE11
  17. SENSE12
  18. SENSE13
  19. SENSE14
  20. SENSE15
  21. SENSE16
  22. VCP
  23. CP1
  24. CP2

Functional Features

  • Bipolar stepper motor driver
  • Full, half, and microstepping modes
  • Adjustable current control
  • Direction control
  • Speed control
  • Built-in protection against overtemperature and overcurrent

Advantages and Disadvantages

Advantages

  • High efficiency motor control
  • Wide operating voltage range
  • Compact package size
  • Flexible microstepping options
  • Built-in protection features

Disadvantages

  • Limited output current capacity (up to 1.5A per phase)
  • Requires external components for complete motor control system

Working Principles

L6219DSTR-T operates by receiving control signals from a microcontroller or other control circuitry. It interprets these signals to drive the connected motor in the desired direction and at the desired speed. The integrated circuit incorporates various protection mechanisms to ensure safe operation and prevent damage to the motor or the driver itself.

Detailed Application Field Plans

L6219DSTR-T finds applications in various fields where precise motor control is required. Some of the common application areas include:

  1. Robotics: L6219DSTR-T can be used in robotic systems to control the movement of robotic arms, legs, or other motorized components.
  2. Industrial Automation: It is suitable for controlling motors in industrial automation equipment such as conveyor belts, assembly lines, and CNC machines.
  3. Automotive: L6219DSTR-T can be utilized in automotive applications for controlling motors in power windows, seat adjustments, and HVAC systems.
  4. Consumer Electronics: It can be employed in consumer electronic devices like printers, scanners, and home appliances that require motor control.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to L6219DSTR-T are:

  1. L6208: This motor driver IC provides similar features and performance as L6219DSTR-T but with a lower output current capacity.
  2. DRV8825: A popular alternative, DRV8825 offers higher output current capability and advanced microstepping options.
  3. A4988: Another widely used alternative, A4988 provides adjustable current control and microstepping capabilities.

These alternative models can be considered based on specific application requirements and desired performance characteristics.

Word count: 529 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af L6219DSTR-T i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of L6219DSTR-T in technical solutions:

  1. Q: What is L6219DSTR-T? A: L6219DSTR-T is a dual full-bridge motor driver IC that can be used to control two DC motors or one stepper motor.

  2. Q: What voltage range does L6219DSTR-T support? A: L6219DSTR-T supports a wide voltage range from 8V to 52V, making it suitable for various applications.

  3. Q: Can L6219DSTR-T drive both brushed and brushless DC motors? A: No, L6219DSTR-T is specifically designed for driving brushed DC motors. It cannot be used with brushless DC motors.

  4. Q: How much current can L6219DSTR-T handle? A: L6219DSTR-T can handle a maximum continuous output current of 1.5A per bridge, making it suitable for many low to medium power motor applications.

  5. Q: Does L6219DSTR-T have built-in protection features? A: Yes, L6219DSTR-T has built-in thermal shutdown and overcurrent protection features to prevent damage to the IC and connected motors.

  6. Q: Can L6219DSTR-T be controlled using PWM signals? A: Yes, L6219DSTR-T can be controlled using PWM (Pulse Width Modulation) signals to vary the speed and direction of the connected motors.

  7. Q: Is L6219DSTR-T compatible with microcontrollers and Arduino boards? A: Yes, L6219DSTR-T can be easily interfaced with microcontrollers and Arduino boards using digital I/O pins.

  8. Q: Can L6219DSTR-T be used in battery-powered applications? A: Yes, L6219DSTR-T has a low quiescent current and can be used in battery-powered applications where power efficiency is important.

  9. Q: What are the typical applications of L6219DSTR-T? A: L6219DSTR-T is commonly used in robotics, automation, CNC machines, 3D printers, and other projects that require motor control.

  10. Q: Where can I find more information about using L6219DSTR-T in technical solutions? A: You can refer to the datasheet and application notes provided by the manufacturer, as well as online forums and communities dedicated to motor control and electronics.