Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
ADR444ARMZ-REEL7

ADR444ARMZ-REEL7

Product Overview

Category: Integrated Circuits (ICs)

Use: Voltage References

Characteristics: - High accuracy - Low temperature coefficient - Low dropout voltage - Low noise - Wide operating temperature range

Package: SOT-23

Essence: ADR444ARMZ-REEL7 is a precision voltage reference IC that provides a stable and accurate output voltage for various applications.

Packaging/Quantity: The ADR444ARMZ-REEL7 is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Output Voltage Range: 2.5V to 5.0V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 3ppm/°C
  • Dropout Voltage: 300mV
  • Noise: 4μVp-p
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage Range: 2.7V to 18V
  • Quiescent Current: 1.5mA

Pin Configuration

The ADR444ARMZ-REEL7 has the following pin configuration:

```


| | --| VOUT | --| GND | --| VIN | |___________| ```

Functional Features

  • High accuracy voltage reference
  • Stable output voltage over a wide temperature range
  • Low dropout voltage allows operation with low input voltages
  • Low noise ensures clean and reliable performance
  • Excellent line and load regulation

Advantages

  • Precise and stable output voltage
  • Low temperature coefficient ensures minimal drift over temperature variations
  • Low dropout voltage enables operation in low voltage applications
  • Low noise ensures high signal integrity
  • Wide operating temperature range allows usage in extreme environments

Disadvantages

  • Relatively higher quiescent current compared to some other voltage references
  • Limited output voltage range (2.5V to 5.0V)

Working Principles

The ADR444ARMZ-REEL7 is based on a bandgap voltage reference circuit, which utilizes the temperature-dependent characteristics of semiconductor materials to generate a stable and accurate reference voltage. The internal circuitry compensates for temperature variations, ensuring a consistent output voltage over a wide temperature range.

Detailed Application Field Plans

The ADR444ARMZ-REEL7 is commonly used in various precision measurement and control systems, including: - Industrial automation - Medical equipment - Test and measurement instruments - Data acquisition systems - Portable devices - Automotive electronics

Detailed Alternative Models

  1. ADR445ARMZ-REEL7: Similar specifications and package as ADR444ARMZ-REEL7, but with an extended output voltage range of 4.096V to 5.0V.
  2. ADR443ARMZ-REEL7: Similar specifications and package as ADR444ARMZ-REEL7, but with a lower initial accuracy of ±0.1%.

These alternative models provide options with slightly different features to suit specific application requirements.

Word count: 346 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af ADR444ARMZ-REEL7 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of ADR444ARMZ-REEL7 in technical solutions:

1. What is the ADR444ARMZ-REEL7? - The ADR444ARMZ-REEL7 is a precision voltage reference IC manufactured by Analog Devices.

2. What is the purpose of using ADR444ARMZ-REEL7 in technical solutions? - The ADR444ARMZ-REEL7 is commonly used as a stable voltage reference in various electronic circuits and systems.

3. What is the voltage output range of ADR444ARMZ-REEL7? - The ADR444ARMZ-REEL7 has a fixed output voltage of 4.096V.

4. What is the typical accuracy of ADR444ARMZ-REEL7? - The ADR444ARMZ-REEL7 has a typical accuracy of ±0.04% at room temperature.

5. What is the operating temperature range of ADR444ARMZ-REEL7? - The ADR444ARMZ-REEL7 can operate within a temperature range of -40°C to +125°C.

6. Can ADR444ARMZ-REEL7 be used in battery-powered applications? - Yes, the ADR444ARMZ-REEL7 can be used in battery-powered applications as it has low power consumption.

7. Is ADR444ARMZ-REEL7 suitable for high-precision measurement systems? - Yes, the ADR444ARMZ-REEL7 is suitable for high-precision measurement systems due to its low noise and excellent long-term stability.

8. Can multiple ADR444ARMZ-REEL7 be connected in parallel to increase the output current? - No, the ADR444ARMZ-REEL7 is not designed to be connected in parallel for increasing output current. It is recommended to use a voltage reference with higher output current capability.

9. What are the typical applications of ADR444ARMZ-REEL7? - The ADR444ARMZ-REEL7 is commonly used in industrial control systems, data acquisition systems, precision instrumentation, and medical equipment.

10. Is ADR444ARMZ-REEL7 available in different package options? - Yes, the ADR444ARMZ-REEL7 is available in a 6-lead SOT-23 package and a 4-lead MSOP package.

Please note that these answers are general and may vary depending on specific application requirements.