FM24CL04B-GTR belongs to the category of non-volatile memory devices.
This product is commonly used for storing and retrieving data in various electronic systems.
The FM24CL04B-GTR is available in a small outline package (SOP) format.
The essence of FM24CL04B-GTR lies in its ability to provide reliable and non-volatile data storage in electronic systems.
This product is typically packaged in reels, with a quantity of 2500 units per reel.
The FM24CL04B-GTR has a total of 8 pins, which are as follows:
The FM24CL04B-GTR utilizes I2C (Inter-Integrated Circuit) interface protocol for communication with the host system. It employs a combination of floating gate and tunnel oxide technology to achieve non-volatile data storage. When data is written, charges are trapped in the floating gate, altering the threshold voltage of the memory cell. These charges can be later sensed to retrieve the stored information.
The FM24CL04B-GTR finds applications in various electronic systems, including but not limited to: - Smart meters - Industrial control systems - Automotive electronics - Medical devices - Wearable technology
Some alternative models to FM24CL04B-GTR include: - AT24C04 from Atmel - CAT24C04 from ON Semiconductor - M24C04 from STMicroelectronics - 24AA04 from Microchip Technology
These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.
In conclusion, the FM24CL04B-GTR is a non-volatile memory device with a storage capacity of 4 kilobits. It provides reliable data storage, low power consumption, and fast access time. While it has limitations in terms of storage capacity and cost, it finds applications in various electronic systems. Alternative models from different manufacturers offer similar functionality as substitutes.
Sure! Here are 10 common questions and answers related to the application of FM24CL04B-GTR in technical solutions:
Q: What is FM24CL04B-GTR? A: FM24CL04B-GTR is a 4Kbit (512 x 8) serial I2C FRAM (Ferroelectric Random Access Memory) chip manufactured by Cypress Semiconductor.
Q: What is the advantage of using FM24CL04B-GTR over traditional EEPROM or Flash memory? A: FM24CL04B-GTR offers faster read/write speeds, higher endurance, and lower power consumption compared to traditional EEPROM or Flash memory.
Q: Can FM24CL04B-GTR be used as a non-volatile memory solution in battery-powered devices? A: Yes, FM24CL04B-GTR has low power consumption and can retain data even when the power is disconnected, making it suitable for battery-powered devices.
Q: What is the maximum operating frequency of FM24CL04B-GTR? A: FM24CL04B-GTR supports an operating frequency of up to 1MHz.
Q: Can FM24CL04B-GTR be used in industrial environments with high temperatures? A: Yes, FM24CL04B-GTR has an extended temperature range of -40°C to +85°C, making it suitable for industrial applications.
Q: Does FM24CL04B-GTR support multiple write cycles without degradation? A: Yes, FM24CL04B-GTR supports unlimited read/write cycles without any degradation in performance.
Q: Can FM24CL04B-GTR be used in automotive applications? A: Yes, FM24CL04B-GTR meets the AEC-Q100 Grade 1 automotive qualification, making it suitable for automotive applications.
Q: What is the typical data retention time of FM24CL04B-GTR? A: FM24CL04B-GTR has a typical data retention time of 10 years.
Q: Can FM24CL04B-GTR be used as a replacement for SRAM in certain applications? A: Yes, FM24CL04B-GTR can be used as a non-volatile alternative to SRAM in applications where data persistence is required.
Q: Is FM24CL04B-GTR compatible with standard I2C interfaces? A: Yes, FM24CL04B-GTR is fully compatible with standard I2C interfaces and can be easily integrated into existing designs.
Please note that these answers are general and may vary depending on specific application requirements.