74LVT245BBQ20-13

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Level Shifter and Bus Transceiver
• Characteristics: Low Voltage, Bi-directional, Tri-state
• Package: 20-pin Quad Flat Package (QFP)
• Essence: Logic Level Conversion and Signal Transmission
• Packaging/Quantity: Typically sold in reels of 2500 units

Specifications

• Supply Voltage Range: 2.7V to 3.6V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 200 MHz
• Number of Channels: 8
• Input/Output Type: Tri-state
• Logic Family: LVT (Low Voltage TTL)

Detailed Pin Configuration

1. OE (Output Enable) - Active Low Output Enable
2. A1 - Channel 1 Data Input/Output
3. B1 - Channel 2 Data Input/Output
4. GND - Ground
5. B2 - Channel 3 Data Input/Output
6. A2 - Channel 4 Data Input/Output
7. VCC - Power Supply
8. DIR (Direction) - Direction Control Input
9. A3 - Channel 5 Data Input/Output
10. B3 - Channel 6 Data Input/Output
11. NC (No Connection)
12. B4 - Channel 7 Data Input/Output
13. A4 - Channel 8 Data Input/Output
14. GND - Ground
15. B5 - Channel 9 Data Input/Output
16. A5 - Channel 10 Data Input/Output
17. VCC - Power Supply
18. B6 - Channel 11 Data Input/Output
19. A6 - Channel 12 Data Input/Output
20. GND - Ground

Functional Features

• Bi-directional level shifting between two voltage domains
• Tri-state outputs for bus sharing and isolation
• High-speed operation up to 200 MHz
• Low power consumption
• ESD (Electrostatic Discharge) protection on all inputs and outputs

Advantages and Disadvantages

Advantages

• Enables interfacing between different logic families with different voltage levels
• Provides bidirectional data transmission capability
• Supports high-speed operation
• Offers protection against electrostatic discharge

Disadvantages

• Limited to a specific voltage range (2.7V to 3.6V)
• Requires careful consideration of input/output voltage compatibility

Working Principles

The 74LVT245BBQ20-13 is a level shifter and bus transceiver IC that allows bidirectional communication between two voltage domains. It operates by converting the logic levels of input signals from one voltage domain to another, enabling seamless data transfer. The direction of data flow is controlled by the DIR pin. When the DIR pin is set to a specific logic level, the corresponding channel's data is transmitted in the specified direction.

Detailed Application Field Plans

The 74LVT245BBQ20-13 is commonly used in various applications where level shifting and bus transceiver functions are required. Some typical application fields include: - Microcontroller interfacing with different voltage peripherals - Communication systems involving multiple voltage domains - Industrial automation and control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

• SN74LVC245A: Similar functionality with a wider supply voltage range (1.65V to 5.5V)
• 74LVTH245: Higher speed operation (up to 400 MHz) with lower power consumption
• 74HCT245: Compatible with higher voltage levels (up to 5.5V) but operates at slower speeds

(Note: The above alternative models are just a few examples and not an exhaustive list.)

This concludes the encyclopedia entry for the 74LVT245BBQ20-13, providing comprehensive information about its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.