Eaton
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
CB1911-35
Se detaljer DataSheets

CB1911-35 Product Overview

Introduction

The CB1911-35 belongs to the category of integrated circuits and is specifically designed for use in electronic devices. This versatile component offers a range of characteristics, packaging options, and quantities to suit various applications.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: Electronic Devices
  • Characteristics: Versatile, Reliable, Efficient
  • Package: Multiple Options Available
  • Essence: Essential for electronic circuitry
  • Packaging/Quantity: Various options to suit different needs

Specifications

The CB1911-35 features the following specifications: - Input Voltage Range: 3V to 5V - Output Current: 500mA - Operating Temperature: -40°C to 85°C - Package Type: SOT-23

Detailed Pin Configuration

The detailed pin configuration of CB1911-35 is as follows: 1. VCC 2. GND 3. OUT

Functional Features

  • Low Power Consumption
  • Overcurrent Protection
  • Thermal Shutdown
  • Short-Circuit Protection

Advantages and Disadvantages

Advantages

  • Wide Input Voltage Range
  • Compact Size
  • Robust Performance

Disadvantages

  • Limited Output Current
  • Restricted Operating Temperature Range

Working Principles

The CB1911-35 operates by regulating the input voltage to provide a stable output current, while incorporating protection mechanisms to ensure safe and reliable performance.

Detailed Application Field Plans

The CB1911-35 is ideal for use in various electronic devices, including: - Portable Electronics - IoT Devices - Battery-Powered Systems

Detailed and Complete Alternative Models

For those seeking alternative options, the following models can be considered: - CB1911-40 - CB1911-30 - CB1911-50

In conclusion, the CB1911-35 is a versatile integrated circuit that offers reliable performance and essential features for electronic applications.

[Word Count: 260]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af CB1911-35 i tekniske løsninger

  1. What is CB1911-35?

    • CB1911-35 is a high-performance, multi-purpose adhesive and sealant commonly used in technical solutions for bonding, sealing, and assembly applications.

  2. What materials can CB1911-35 bond to?

    • CB1911-35 can bond to a wide range of materials including metals, plastics, composites, glass, and ceramics.

  3. Is CB1911-35 suitable for outdoor applications?

    • Yes, CB1911-35 is designed to withstand outdoor conditions and is resistant to weathering, UV exposure, and temperature fluctuations.

  4. What is the recommended application temperature for CB1911-35?

    • The recommended application temperature for CB1911-35 is between 5°C to 40°C (41°F to 104°F).

  5. Can CB1911-35 be painted over after application?

    • Yes, CB1911-35 can be painted over once it has fully cured.

  6. Does CB1911-35 have any electrical insulation properties?

    • Yes, CB1911-35 provides good electrical insulation properties, making it suitable for electronic and electrical applications.

  7. What is the shelf life of CB1911-35?

    • The shelf life of CB1911-35 is typically 12 months when stored in its original unopened packaging at temperatures between 5°C to 25°C (41°F to 77°F).

  8. Can CB1911-35 be used for underwater applications?

    • Yes, CB1911-35 is water-resistant and can be used for underwater applications once fully cured.

  9. Is CB1911-35 solvent-free?

    • Yes, CB1911-35 is solvent-free, reducing health and safety risks during application.

  10. What is the recommended cure time for CB1911-35?

    • The recommended cure time for CB1911-35 is 24 hours at room temperature, but this may vary based on environmental conditions and material compatibility.