Global Power Technologies Group
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
GP2D012A065A
Se detaljer DataSheets

GP2D012A065A - Product Overview

Introduction

The GP2D012A065A is a sensor designed for distance measurement and belongs to the category of proximity sensors. This sensor is widely used in various applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Proximity Sensor
  • Use: Distance Measurement
  • Characteristics: Compact, High Accuracy, Analog Output
  • Package: Module
  • Essence: Precise Distance Sensing
  • Packaging/Quantity: Individual Unit

Specifications

The GP2D012A065A sensor has the following specifications: - Operating Range: 20mm to 150mm - Supply Voltage: 4.5V to 5.5V - Average Current Consumption: 33mA - Output Type: Analog Voltage - Output Voltage: 0.4V (at 20mm) to 2.55V (at 150mm)

Detailed Pin Configuration

The sensor has the following pin configuration: 1. Vcc (Power Supply) 2. GND (Ground) 3. Vo (Analog Output)

Functional Features

  • Precise Distance Measurement
  • Compact Size
  • Low Power Consumption
  • Analog Output for easy interfacing

Advantages

  • Accurate distance measurement
  • Suitable for compact designs
  • Analog output simplifies integration

Disadvantages

  • Limited operating range
  • Vulnerable to ambient light interference

Working Principles

The GP2D012A065A sensor utilizes infrared light to measure the distance between the sensor and the object. The reflected light intensity is converted into an analog voltage, which is proportional to the distance.

Detailed Application Field Plans

This sensor finds extensive applications in: - Robotics for obstacle detection - Industrial automation for proximity sensing - Consumer electronics for touchless interfaces

Detailed and Complete Alternative Models

Some alternative models to GP2D012A065A include: - Sharp GP2Y0A21YK0F - Maxbotix LV-EZ0 - Adafruit VL6180X Time of Flight Distance Sensor

In conclusion, the GP2D012A065A proximity sensor offers precise distance measurement capabilities in a compact form factor, making it suitable for various applications ranging from robotics to consumer electronics.

[Word Count: 305]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af GP2D012A065A i tekniske løsninger

  1. What is the GP2D012A065A sensor used for?

    • The GP2D012A065A sensor is commonly used for distance measurement in technical solutions.

  2. What is the operating voltage of the GP2D012A065A sensor?

    • The operating voltage of the GP2D012A065A sensor is typically around 5V.

  3. How does the GP2D012A065A sensor measure distance?

    • The GP2D012A065A sensor measures distance using infrared light and triangulation principles.

  4. What is the range of the GP2D012A065A sensor?

    • The GP2D012A065A sensor has a range of approximately 20 to 150 mm.

  5. Can the GP2D012A065A sensor be used in outdoor environments?

    • No, the GP2D012A065A sensor is not suitable for outdoor use as it may be affected by ambient light and other environmental factors.

  6. What are some common applications of the GP2D012A065A sensor?

    • Common applications of the GP2D012A065A sensor include robotics, automation, and proximity sensing in various technical solutions.

  7. Does the GP2D012A065A sensor require calibration?

    • Yes, the GP2D012A065A sensor may require calibration to ensure accurate distance measurements.

  8. Is the GP2D012A065A sensor sensitive to ambient light?

    • Yes, the GP2D012A065A sensor can be sensitive to ambient light, so it's important to consider this factor when integrating it into a technical solution.

  9. What is the output of the GP2D012A065A sensor?

    • The GP2D012A065A sensor typically provides an analog output proportional to the measured distance.

  10. Are there any limitations to consider when using the GP2D012A065A sensor?

    • Some limitations to consider when using the GP2D012A065A sensor include its limited range and sensitivity to certain environmental conditions.