Honeywell Sensing and Productivity Solutions
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
SS496A1
Se detaljer DataSheets

SS496A1 Product Overview

Introduction

SS496A1 is a magnetic position sensor that belongs to the category of Hall Effect sensors. This sensor is widely used in various applications due to its unique characteristics and reliable performance.

Basic Information Overview

  • Category: Hall Effect Sensor
  • Use: Position sensing
  • Characteristics: High sensitivity, non-contact operation
  • Package: TO-92UA
  • Essence: Magnetic field sensing
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

The SS496A1 sensor has the following specifications: - Operating Voltage: 4.5V to 10.5V - Output Current: 6mA - Operating Temperature: -40°C to 150°C - Sensitivity: 2.5mV/Gauss

Detailed Pin Configuration

The SS496A1 sensor has a standard 3-pin configuration: 1. VCC (Supply Voltage) 2. GND (Ground) 3. OUT (Output)

Functional Features

  • Non-contact operation
  • High sensitivity to magnetic fields
  • Wide operating temperature range
  • Low power consumption

Advantages and Disadvantages

Advantages

  • Reliable and accurate position sensing
  • Suitable for harsh environments
  • Low power consumption

Disadvantages

  • Susceptible to external magnetic interference
  • Limited linear range

Working Principles

The SS496A1 operates based on the Hall Effect principle, where the output voltage changes in response to the presence and strength of a magnetic field. When exposed to a magnetic field, the sensor generates a corresponding output signal, allowing for precise position detection.

Detailed Application Field Plans

The SS496A1 sensor finds extensive use in the following application fields: - Automotive: Throttle position sensing, gear shift detection - Industrial: Motor control, rotary encoder feedback - Consumer Electronics: Proximity detection, joystick positioning

Detailed and Complete Alternative Models

Some alternative models to SS496A1 include: - SS49E - A1324

In conclusion, the SS496A1 Hall Effect sensor offers reliable and accurate position sensing capabilities, making it suitable for a wide range of applications across different industries.

Word count: 298

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af SS496A1 i tekniske løsninger

  1. What is SS496A1?

    • SS496A1 is a Hall effect sensor that can be used to detect the presence of a magnetic field.

  2. How does SS496A1 work?

    • The SS496A1 operates based on the Hall effect, which means it generates a voltage proportional to the strength of the magnetic field it detects.

  3. What are the typical applications of SS496A1?

    • SS496A1 is commonly used in applications such as position sensing, speed detection, and current sensing in various technical solutions.

  4. What is the operating voltage range for SS496A1?

    • The operating voltage range for SS496A1 is typically between 4.5V and 10V.

  5. What is the output type of SS496A1?

    • SS496A1 provides a digital output, typically in the form of a logic high or low signal.

  6. What is the sensitivity of SS496A1?

    • The sensitivity of SS496A1 is typically specified in millivolts per gauss (mV/G).

  7. Can SS496A1 be used in automotive applications?

    • Yes, SS496A1 is suitable for automotive applications such as gear position sensing and throttle control.

  8. What is the temperature range for SS496A1?

    • The temperature range for SS496A1 is usually specified from -40°C to 150°C, making it suitable for a wide range of environments.

  9. Does SS496A1 require external components for operation?

    • SS496A1 may require additional components such as resistors and capacitors for proper operation and signal conditioning.

  10. Is SS496A1 sensitive to electromagnetic interference (EMI)?

    • SS496A1 may be susceptible to EMI, so proper shielding and filtering techniques should be considered in EMI-prone environments.