5P49V5901B695NLGI8

Basic Information Overview

Category: Electronic Component
Use: Clock Generator
Characteristics: High Precision, Low Power Consumption
Package: QFN-20
Essence: Integrated Circuit
Packaging/Quantity: Tape & Reel / 2500 units per reel

Specifications and Parameters

Frequency Range: 1 MHz to 200 MHz
Supply Voltage: 1.8 V to 3.3 V
Output Format: LVCMOS
Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5P49V5901B695NLGI8 clock generator has the following pin configuration:

VDD (Power Supply)
GND (Ground)
XIN (Crystal Oscillator Input)
XOUT (Crystal Oscillator Output)
CLK_OUT0 (Clock Output 0)
CLK_OUT1 (Clock Output 1)
CLK_OUT2 (Clock Output 2)
CLK_OUT3 (Clock Output 3)
CLK_OUT4 (Clock Output 4)
CLK_OUT5 (Clock Output 5)
CLK_OUT6 (Clock Output 6)
CLK_OUT7 (Clock Output 7)
CLK_OUT8 (Clock Output 8)
CLK_OUT9 (Clock Output 9)
CLK_OUT10 (Clock Output 10)
CLK_OUT11 (Clock Output 11)
CLK_OUT12 (Clock Output 12)
CLK_OUT13 (Clock Output 13)
CLK_OUT14 (Clock Output 14)
CLK_OUT15 (Clock Output 15)

Functional Characteristics

Generates up to 16 different clock outputs simultaneously
Supports frequency multiplication and division
Provides programmable output skew control
Low jitter and phase noise performance

Advantages and Disadvantages

Advantages: - High precision clock generation - Low power consumption - Programmable output skew control

Disadvantages: - Limited frequency range (1 MHz to 200 MHz) - Requires an external crystal oscillator

Applicable Range of Products

The 5P49V5901B695NLGI8 clock generator is commonly used in various electronic devices, including:

Computers and laptops
Communication equipment
Consumer electronics
Industrial automation systems
Automotive applications

Working Principles

The 5P49V5901B695NLGI8 clock generator utilizes a crystal oscillator input to generate multiple clock outputs with precise frequencies. It incorporates frequency multiplication and division techniques to achieve the desired output frequencies. The device also allows for programmable output skew control, enabling fine-tuning of clock signals.

Detailed Application Field Plans

The 5P49V5901B695NLGI8 clock generator can be applied in various fields, such as:

Computer motherboards: Provides synchronized clock signals for the CPU, memory, and other components.
Networking equipment: Ensures accurate timing for data transmission and synchronization between network devices.
Audio/video equipment: Enables precise timing for audio and video processing, reducing signal distortion.
Test and measurement instruments: Provides stable and accurate clock references for precise measurements.
Automotive systems: Supports timing requirements for engine control units, infotainment systems, and other automotive electronics.

Detailed Alternative Models

Some alternative models to the 5P49V5901B695NLGI8 clock generator include:

5P49V5901A695NLGI8
5P49V5901C695NLGI8
5P49V5901D695NLGI8
5P49V5901E695NLGI8

5 Common Technical Questions and Answers

Q: What is the maximum frequency output of the 5P49V5901B695NLGI8? A: The maximum frequency output is 200 MHz.
Q: Can I use a different package for this clock generator? A: No, the 5P49V5901B695NLGI8 is only available in the QFN-20 package.
Q: Does this clock generator require an external power supply? A: Yes, it requires a power supply voltage between 1.8 V and 3.3 V.
Q: Can I adjust the output skew of the clock signals? A: Yes, the 5P49V5901B695NLGI8 provides programmable output skew control.
Q: What is the operating temperature range of this clock generator? A: The operating temperature range is from -40°C to +85°C.

This concludes the encyclopedia entry for the 5P49V5901B