IDT, Integrated Device Technology Inc
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
72V211L10PFG8
Se detaljer DataSheets

72V211L10PFG8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High voltage, low power consumption
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 6V to 80V
  • Output Voltage Range: 3.3V to 60V
  • Output Current: Up to 1A
  • Quiescent Current: 10µA
  • Operating Temperature Range: -40°C to +85°C
  • Package Dimensions: 7mm x 7mm

Detailed Pin Configuration

The 72V211L10PFG8 IC has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • Low quiescent current ensures minimal power consumption
  • High efficiency conversion for improved energy utilization
  • Overcurrent and overtemperature protection for enhanced safety
  • Adjustable output voltage through external resistor divider network

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources - Low power consumption contributes to energy efficiency - High efficiency conversion reduces heat dissipation - Protection features enhance system reliability

Disadvantages: - Limited output current may not be suitable for high-power applications - Requires external components for proper operation

Working Principles

The 72V211L10PFG8 is a voltage regulator IC that utilizes a buck converter topology. It regulates the input voltage to a desired output voltage level by controlling the duty cycle of an internal switch. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle accordingly to maintain a stable output.

Detailed Application Field Plans

The 72V211L10PFG8 is commonly used in various applications, including:

  1. Automotive: Power management for electric vehicles, battery charging systems
  2. Industrial: Motor control, power supplies for industrial equipment
  3. Telecommunications: Voltage regulation for telecom infrastructure
  4. Renewable Energy: Solar panel voltage regulation, wind turbine power management

Detailed and Complete Alternative Models

  1. 72V211L05PFG8: Similar to 72V211L10PFG8 but with a lower output voltage range (3.3V to 5V)
  2. 72V211L20PFG8: Similar to 72V211L10PFG8 but with a higher output voltage range (3.3V to 20V)
  3. 72V211L50PFG8: Similar to 72V211L10PFG8 but with a higher output current capability (up to 5A)

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific application requirements.

(Note: The above content is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af 72V211L10PFG8 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of 72V211L10PFG8 in technical solutions:

  1. Question: What is the voltage rating of the 72V211L10PFG8?
    Answer: The voltage rating of the 72V211L10PFG8 is 72 volts.

  2. Question: What does the "L10" in the part number signify?
    Answer: The "L10" indicates that this component has a lead pitch of 10mm.

  3. Question: Can the 72V211L10PFG8 be used in high-power applications?
    Answer: Yes, the 72V211L10PFG8 is suitable for high-power applications due to its high voltage rating.

  4. Question: What type of package does the 72V211L10PFG8 come in?
    Answer: The 72V211L10PFG8 comes in a standard package with pins for easy integration into circuit boards.

  5. Question: Is the 72V211L10PFG8 compatible with both analog and digital circuits?
    Answer: Yes, the 72V211L10PFG8 can be used in both analog and digital circuits.

  6. Question: Does the 72V211L10PFG8 have any built-in protection features?
    Answer: Yes, the 72V211L10PFG8 includes built-in protection against overvoltage and overcurrent conditions.

  7. Question: Can the 72V211L10PFG8 be used in automotive applications?
    Answer: Yes, the 72V211L10PFG8 is suitable for automotive applications where a high voltage rating is required.

  8. Question: What is the typical operating temperature range of the 72V211L10PFG8?
    Answer: The typical operating temperature range of the 72V211L10PFG8 is -40°C to +125°C.

  9. Question: Does the 72V211L10PFG8 require any external components for proper operation?
    Answer: No, the 72V211L10PFG8 is a standalone component and does not require any external components.

  10. Question: Can the 72V211L10PFG8 be used in industrial control systems?
    Answer: Yes, the 72V211L10PFG8 is suitable for use in various industrial control systems that require high voltage capabilities.