IDT, Integrated Device Technology Inc
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
74FCT244CTPYG
Se detaljer DataSheets

Encyclopedia Entry: 74FCT244CTPYG

Product Overview

Category

The 74FCT244CTPYG belongs to the category of integrated circuits (ICs) and specifically falls under the family of buffer/line drivers.

Use

This product is commonly used in digital systems for signal buffering and line driving purposes. It helps to amplify and stabilize signals, ensuring reliable transmission between different components of a circuit.

Characteristics

  • High-speed operation: The 74FCT244CTPYG is designed to operate at high speeds, making it suitable for applications that require fast data transfer.
  • Low power consumption: This IC is energy-efficient, consuming minimal power during operation.
  • Wide voltage range: It can operate within a wide voltage range, allowing compatibility with various digital systems.
  • Robust design: The 74FCT244CTPYG is built to withstand harsh environmental conditions and provide long-term reliability.

Package and Quantity

The 74FCT244CTPYG is available in a small outline package (SOP) with 20 pins. It is typically sold in reels or tubes containing multiple units, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 6 ns
  • Maximum Output Current: ±24 mA

Pin Configuration

The 74FCT244CTPYG has a total of 20 pins, which are assigned specific functions as follows:

  1. A1 - Input A1
  2. Y1 - Output Y1
  3. A2 - Input A2
  4. Y2 - Output Y2
  5. GND - Ground
  6. Y3 - Output Y3
  7. A3 - Input A3
  8. Y4 - Output Y4
  9. A4 - Input A4
  10. Y5 - Output Y5
  11. GND - Ground
  12. Y6 - Output Y6
  13. A5 - Input A5
  14. Y7 - Output Y7
  15. A6 - Input A6
  16. Y8 - Output Y8
  17. VCC - Power Supply
  18. OE - Output Enable
  19. GND - Ground
  20. A7 - Input A7

Functional Features

  • Buffering: The 74FCT244CTPYG acts as a buffer, amplifying and stabilizing digital signals to ensure proper transmission between different components of a circuit.
  • Line driving: It provides the necessary driving capability to transmit signals over long distances without significant degradation.
  • High-speed operation: This IC is designed to operate at high speeds, making it suitable for applications that require fast data transfer.
  • Output enable control: The OE pin allows users to enable or disable the outputs, providing flexibility in controlling signal flow.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data transfer.
  • Low power consumption results in energy efficiency.
  • Wide voltage range allows compatibility with various systems.
  • Robust design ensures reliability even in harsh environments.

Disadvantages

  • Limited number of input/output channels (8 in total).
  • May not be suitable for applications requiring a higher number of channels.

Working Principles

The 74FCT244CTPYG operates by receiving digital input signals on its input pins (A1-A7) and amplifying them to produce corresponding output signals on the output pins (Y1-Y8). The output enable (OE) pin controls the activation of the output signals. When the OE pin is low, the outputs are enabled, and when it is high, the outputs are disabled.

Application Field Plans

The 74FCT244CTPYG finds applications in various digital systems, including but not limited to: - Microprocessors and microcontrollers - Data communication systems - Memory interfaces - Industrial automation systems - Automotive electronics

Alternative Models

Several alternative models with similar functionality to the 74FCT244CTPYG include: - SN74FCT244ATQ: Manufactured by Texas Instruments - MC74FCT244AN: Manufactured by ON Semiconductor - CD74FCT244E: Manufactured by Texas Instruments - 74ACT244SCX: Manufactured by Fairchild Semiconductor

These alternative models can be considered based on specific requirements and availability.

In conclusion, the 74FCT244CTPYG is a high-speed buffer/line driver IC used in digital systems for signal amplification and transmission. Its characteristics, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models make it a versatile

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af 74FCT244CTPYG i tekniske løsninger

  1. What is the operating voltage range of 74FCT244CTPYG?
    - The operating voltage range of 74FCT244CTPYG is 4.5V to 5.5V.

  2. What is the maximum propagation delay of 74FCT244CTPYG?
    - The maximum propagation delay of 74FCT244CTPYG is 6ns.

  3. Can 74FCT244CTPYG be used for level shifting applications?
    - Yes, 74FCT244CTPYG can be used for level shifting applications.

  4. Does 74FCT244CTPYG have 3-state outputs?
    - Yes, 74FCT244CTPYG has 3-state outputs.

  5. What is the typical output drive capability of 74FCT244CTPYG?
    - The typical output drive capability of 74FCT244CTPYG is 24mA.

  6. Is 74FCT244CTPYG compatible with TTL and CMOS logic levels?
    - Yes, 74FCT244CTPYG is compatible with TTL and CMOS logic levels.

  7. Can 74FCT244CTPYG be used in high-speed data transmission applications?
    - Yes, 74FCT244CTPYG can be used in high-speed data transmission applications.

  8. What is the package type of 74FCT244CTPYG?
    - The package type of 74FCT244CTPYG is 20-pin TSSOP.

  9. Does 74FCT244CTPYG have built-in ESD protection?
    - Yes, 74FCT244CTPYG has built-in ESD protection.

  10. Is 74FCT244CTPYG RoHS compliant?
    - Yes, 74FCT244CTPYG is RoHS compliant.