IDTSTAC9271X5TAEB4XR
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Audio Codec
- Characteristics: High-performance, low-power consumption
- Package: TQFP (Thin Quad Flat Pack)
- Essence: Provides audio processing and conversion capabilities
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage: 2.7V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Digital Interface: I2C, SPI
- Audio Resolution: Up to 24-bit
- Sampling Rate: Up to 192 kHz
- Number of Channels: 5 (4 stereo DACs, 1 mono ADC)
- Signal-to-Noise Ratio (SNR): >100 dB
- Total Harmonic Distortion (THD): <0.01%
Detailed Pin Configuration
The IDTSTAC9271X5TAEB4XR has a total of 48 pins. The pin configuration is as follows:
- VDDA
- VSSA
- AGND
- AVDD
- DVDD
- RESETB
- MCLK
- BCLK
- LRCLK
- SDA
- SCL
- GPIO1
- GPIO2
- GPIO3
- GPIO4
- GPIO5
- GPIO6
- GPIO7
- GPIO8
- GPIO9
- GPIO10
- GPIO11
- GPIO12
- GPIO13
- GPIO14
- GPIO15
- GPIO16
- GPIO17
- GPIO18
- GPIO19
- GPIO20
- GPIO21
- GPIO22
- GPIO23
- GPIO24
- GPIO25
- GPIO26
- GPIO27
- GPIO28
- GPIO29
- GPIO30
- GPIO31
- GPIO32
- GPIO33
- GPIO34
- GPIO35
- GPIO36
- GPIO37
Functional Features
- High-quality audio playback and recording
- Support for multiple audio formats (e.g., PCM, DSD)
- Built-in digital signal processing (DSP) for audio enhancement
- Flexible configuration options through I2C or SPI interface
- Low power consumption for extended battery life in portable devices
- Integrated headphone amplifier for driving headphones directly
Advantages and Disadvantages
Advantages: - High-performance audio processing capabilities - Wide range of supported audio formats and sampling rates - Flexible configuration options for customization - Low power consumption for energy-efficient applications
Disadvantages: - Relatively large package size compared to some other audio codecs - Limited number of channels (5) compared to higher-end models
Working Principles
The IDTSTAC9271X5TAEB4XR is an audio codec that operates by converting analog audio signals into digital data and vice versa. It uses a combination of digital-to-analog converters (DACs) and an analog-to-digital converter (ADC) to achieve this conversion. The digital audio data can be processed and enhanced using the built-in DSP before being output or recorded.
Detailed Application Field Plans
The IDTSTAC9271X5TAEB4XR is widely used in various audio-related applications, including: - Consumer electronics: smartphones, tablets, portable media players - Home entertainment systems: soundbars, AV receivers, gaming consoles - Automotive infotainment systems: car audio systems, head units - Professional audio equipment: mixers, amplifiers, audio interfaces
Detailed and Complete Alternative Models
- IDTSTAC9270X5TAEB4XR: Similar to IDTSTAC9271X5TAEB4XR but without the integrated headphone amplifier.
- IDTSTAC9281X5TAEB4XR: Higher-end model with additional features such as more channels and advanced audio processing capabilities.
- IDTSTAC9261X5TAEB4XR: Lower-cost alternative with basic audio codec functionality.
These alternative models provide options for different application requirements and budget constraints.
Word count: 510 words
Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IDTSTAC9271X5TAEB4XR i tekniske løsninger
Sure! Here are 10 common questions and answers related to the application of IDTSTAC9271X5TAEB4XR in technical solutions:
Q1: What is IDTSTAC9271X5TAEB4XR? A1: IDTSTAC9271X5TAEB4XR is a specific model number of an integrated circuit (IC) developed by IDT (Integrated Device Technology). It is commonly used in technical solutions for various applications.
Q2: What are the key features of IDTSTAC9271X5TAEB4XR? A2: Some key features of IDTSTAC9271X5TAEB4XR include high-performance audio processing, low power consumption, multiple input/output interfaces, and support for various audio formats.
Q3: In what technical solutions can IDTSTAC9271X5TAEB4XR be used? A3: IDTSTAC9271X5TAEB4XR can be used in a wide range of technical solutions, including audio systems, home entertainment devices, automotive infotainment systems, and professional audio equipment.
Q4: How does IDTSTAC9271X5TAEB4XR enhance audio processing? A4: IDTSTAC9271X5TAEB4XR incorporates advanced algorithms and signal processing techniques to enhance audio quality, reduce noise, and provide immersive sound experiences.
Q5: Does IDTSTAC9271X5TAEB4XR support digital audio interfaces? A5: Yes, IDTSTAC9271X5TAEB4XR supports various digital audio interfaces such as I2S, TDM, S/PDIF, and PCM. This allows seamless integration with other digital audio components.
Q6: Can IDTSTAC9271X5TAEB4XR be used in battery-powered devices? A6: Yes, IDTSTAC9271X5TAEB4XR is designed to operate with low power consumption, making it suitable for battery-powered devices such as portable audio players and wireless headphones.
Q7: What are the advantages of using IDTSTAC9271X5TAEB4XR in automotive infotainment systems? A7: IDTSTAC9271X5TAEB4XR offers robust audio processing capabilities, noise cancellation features, and support for multiple audio channels, making it ideal for delivering high-quality audio experiences in vehicles.
Q8: Can IDTSTAC9271X5TAEB4XR be used in conjunction with other audio processing ICs? A8: Yes, IDTSTAC9271X5TAEB4XR can be easily integrated with other audio processing ICs to create more complex audio solutions or to enhance specific functionalities.
Q9: Is IDTSTAC9271X5TAEB4XR compatible with common operating systems? A9: Yes, IDTSTAC9271X5TAEB4XR is designed to be compatible with popular operating systems such as Linux, Android, and Windows, allowing for easy integration into existing software ecosystems.
Q10: Where can I find technical documentation and support for IDTSTAC9271X5TAEB4XR? A10: You can find technical documentation, datasheets, application notes, and support resources for IDTSTAC9271X5TAEB4XR on the official website of IDT or by contacting their customer support team.