Infineon Technologies
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
BTS436L2S
Se detaljer DataSheets

BTS436L2S

Product Overview

Category

BTS436L2S belongs to the category of power switch and protection devices.

Use

This product is primarily used for controlling and protecting electrical circuits in various applications.

Characteristics

  • High power handling capability
  • Low on-resistance
  • Overcurrent and overtemperature protection
  • Fast switching speed
  • Compact size

Package

The BTS436L2S comes in a small surface-mount package, making it suitable for space-constrained designs.

Essence

The essence of BTS436L2S lies in its ability to efficiently control and protect electrical circuits, ensuring safe and reliable operation.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Maximum Continuous Drain Current: 6A
  • On-Resistance (RDS(ON)): 40mΩ
  • Supply Voltage Range: 5V - 34V
  • Operating Temperature Range: -40°C to +150°C
  • Gate Threshold Voltage: 1.8V
  • Gate-Source Voltage (Max): ±20V

Detailed Pin Configuration

The BTS436L2S has a total of 7 pins:

  1. Vbb (Battery supply voltage)
  2. GND (Ground)
  3. IN (Input control signal)
  4. OUT (Output to load)
  5. DIAG (Diagnostic output)
  6. SENSE (Current sense input)
  7. VS (Supply voltage)

Functional Features

  • Overcurrent protection: The BTS436L2S incorporates an integrated current limit function that protects the circuit from excessive current flow.
  • Overtemperature protection: It includes a thermal shutdown feature that prevents the device from overheating.
  • Fast switching: The device offers fast turn-on and turn-off times, enabling efficient switching operations.
  • Diagnostic output: The DIAG pin provides a diagnostic signal indicating the status of the device.

Advantages and Disadvantages

Advantages

  • High power handling capability allows for use in demanding applications.
  • Low on-resistance minimizes power losses and improves efficiency.
  • Overcurrent and overtemperature protection enhance circuit reliability.
  • Compact size enables space-saving designs.

Disadvantages

  • Limited supply voltage range may restrict certain applications.
  • Requires external components for proper operation.
  • Sensitivity to electrostatic discharge (ESD) requires careful handling during assembly.

Working Principles

The BTS436L2S operates based on the principle of field-effect transistors (FETs). It utilizes MOSFET technology to control the flow of current through the load. By adjusting the gate voltage, the device can regulate the current passing through it, providing efficient control and protection.

Detailed Application Field Plans

The BTS436L2S finds application in various fields, including:

  1. Automotive: Used in automotive lighting systems, motor control units, and battery management systems.
  2. Industrial: Employed in industrial automation, power supplies, and motor control applications.
  3. Consumer Electronics: Utilized in home appliances, audio amplifiers, and LED lighting systems.

Detailed and Complete Alternative Models

  1. BTS432E2: Similar functionality with lower power handling capability.
  2. BTS50085-1TMB: Higher power handling capability with additional features like reverse battery protection.
  3. BTS6144D: Enhanced diagnostic capabilities with integrated short-circuit protection.

(Note: This list is not exhaustive and other alternative models may exist.)

In conclusion, the BTS436L2S is a versatile power switch and protection device that offers high power handling capability, low on-resistance, and various protective features. Its compact size and fast switching speed make it suitable for a wide range of applications in automotive, industrial, and consumer electronics fields. While it has certain limitations, such as a limited supply voltage range, the BTS436L2S remains a reliable choice for controlling and protecting electrical circuits.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af BTS436L2S i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of BTS436L2S in technical solutions:

  1. Q: What is BTS436L2S? A: BTS436L2S is a high-side power switch used for controlling and protecting loads in automotive and industrial applications.

  2. Q: What is the maximum voltage and current rating of BTS436L2S? A: The maximum voltage rating is 60V, and the maximum current rating is 7A.

  3. Q: Can BTS436L2S be used with both automotive and industrial loads? A: Yes, BTS436L2S is designed to work with both automotive and industrial loads.

  4. Q: What are the key features of BTS436L2S? A: Some key features include overcurrent protection, overtemperature protection, short-circuit protection, and diagnostic feedback.

  5. Q: How does the overcurrent protection work in BTS436L2S? A: BTS436L2S monitors the load current and shuts off the power switch if the current exceeds a predefined threshold.

  6. Q: Can BTS436L2S handle inductive loads? A: Yes, BTS436L2S is capable of handling inductive loads, thanks to its built-in protection mechanisms.

  7. Q: Is BTS436L2S compatible with microcontrollers or other control systems? A: Yes, BTS436L2S can be easily controlled by microcontrollers or other control systems using its input pins.

  8. Q: Does BTS436L2S have any diagnostic features? A: Yes, BTS436L2S provides diagnostic feedback through its output pin, which can be used to monitor the status of the power switch.

  9. Q: Can BTS436L2S be used in high-temperature environments? A: Yes, BTS436L2S is designed to operate reliably in high-temperature environments, thanks to its overtemperature protection.

  10. Q: Are there any application examples where BTS436L2S can be used? A: Yes, BTS436L2S can be used in various applications such as automotive lighting, motor control, heating systems, and power distribution modules.

Please note that these answers are general and may vary depending on the specific requirements and use cases.