Infineon Technologies
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IR2156SPBF
Se detaljer DataSheets

IR2156SPBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High voltage, half-bridge driver IC
  • Package: SOP-16
  • Essence: Control and drive power MOSFETs in high voltage applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 10V to 20V
  • Output Current: 200mA
  • Operating Temperature Range: -40°C to +125°C
  • Switching Frequency: Up to 1MHz
  • Protection Features: Over-current protection, Under-voltage lockout, Thermal shutdown

Pin Configuration

The IR2156SPBF has a total of 16 pins. The pin configuration is as follows:

  1. VCC
  2. HO
  3. LO
  4. VSS
  5. SD
  6. RT
  7. CT
  8. OSC
  9. COMP
  10. FB
  11. VS
  12. HS
  13. LS
  14. VB
  15. NC
  16. NC

Functional Features

  • High voltage floating channel
  • Integrated bootstrap diode
  • Programmable dead-time
  • Adaptive shoot-through protection
  • Low side output in phase with input
  • Internal oscillator with frequency control

Advantages and Disadvantages

Advantages: - High voltage capability - Integrated bootstrap diode simplifies circuit design - Programmable dead-time allows for precise control - Adaptive shoot-through protection enhances system reliability

Disadvantages: - Limited output current (200mA) - Requires external components for complete functionality

Working Principles

The IR2156SPBF is designed to control and drive power MOSFETs in high voltage applications. It operates by generating complementary drive signals for the high-side and low-side MOSFETs in a half-bridge configuration. The integrated bootstrap diode simplifies the circuit design by providing the necessary voltage to drive the high-side MOSFET. The programmable dead-time feature ensures proper timing between the high-side and low-side switches, preventing shoot-through current. The IC also incorporates protection features such as over-current protection, under-voltage lockout, and thermal shutdown.

Detailed Application Field Plans

The IR2156SPBF is commonly used in various power management applications, including:

  1. Switching Power Supplies
  2. Motor Drives
  3. Inverters
  4. Uninterruptible Power Supplies (UPS)
  5. Solar Power Systems

Detailed and Complete Alternative Models

  1. IR2155SPBF: Similar functionality with minor differences in specifications.
  2. IRS2156DSPBF: Enhanced version with additional protection features.
  3. IR2104SPBF: Half-bridge driver IC with lower voltage capability.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 298 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IR2156SPBF i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of IR2156SPBF in technical solutions:

  1. Q: What is the IR2156SPBF? A: The IR2156SPBF is a high-voltage, self-oscillating half-bridge gate driver IC designed for use in power electronics applications.

  2. Q: What are the typical applications of the IR2156SPBF? A: The IR2156SPBF is commonly used in applications such as motor drives, switch-mode power supplies, and lighting ballasts.

  3. Q: What voltage range does the IR2156SPBF support? A: The IR2156SPBF supports a wide input voltage range, typically from 10V to 20V.

  4. Q: Can the IR2156SPBF drive both high-side and low-side MOSFETs? A: Yes, the IR2156SPBF is specifically designed to drive both high-side and low-side MOSFETs in a half-bridge configuration.

  5. Q: Does the IR2156SPBF have built-in protection features? A: Yes, the IR2156SPBF includes various protection features such as over-current protection, under-voltage lockout, and thermal shutdown.

  6. Q: What is the maximum switching frequency supported by the IR2156SPBF? A: The IR2156SPBF can support switching frequencies up to several hundred kilohertz, depending on the specific application requirements.

  7. Q: Can the IR2156SPBF be used with different types of MOSFETs? A: Yes, the IR2156SPBF is compatible with a wide range of N-channel and P-channel MOSFETs, allowing flexibility in component selection.

  8. Q: Is the IR2156SPBF suitable for high-power applications? A: Yes, the IR2156SPBF is capable of driving MOSFETs with high current ratings, making it suitable for high-power applications.

  9. Q: Does the IR2156SPBF require external components for operation? A: Yes, the IR2156SPBF requires external components such as bootstrap capacitors, gate resistors, and a power supply to function properly.

  10. Q: Are there any application notes or reference designs available for the IR2156SPBF? A: Yes, International Rectifier (now Infineon Technologies) provides application notes and reference designs that can help in implementing the IR2156SPBF in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the IR2156SPBF in different applications.