Infineon Technologies
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IRL60HS118
Se detaljer DataSheets

IRL60HS118

Product Overview

The IRL60HS118 belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET is characterized by its high current-carrying capability, low on-state resistance, and efficient thermal performance. It is typically packaged in a TO-220AB package and is available in various quantities to suit different application needs.

Basic Information

  • Category: Power MOSFET
  • Use: Switching and amplification in electronic circuits
  • Characteristics: High current-carrying capability, low on-state resistance, efficient thermal performance
  • Package: TO-220AB
  • Essence: Efficient power management
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on supplier and application requirements

Specifications

  • Voltage Rating: 100V
  • Continuous Drain Current: 60A
  • RDS(ON): 6.0mΩ
  • Gate Threshold Voltage: 2.0V - 4.0V
  • Operating Temperature Range: -55°C to 175°C
  • Mounting Type: Through Hole
  • Package / Case: TO-220-3

Detailed Pin Configuration

The IRL60HS118 MOSFET has three pins: 1. Gate (G): Input pin for controlling the flow of current through the MOSFET. 2. Drain (D): The output pin where the current flows out from the MOSFET. 3. Source (S): The pin through which the current enters the MOSFET.

Functional Features

  • High Current Capability: The IRL60HS118 can handle high continuous drain currents, making it suitable for power applications.
  • Low On-State Resistance: This MOSFET exhibits low RDS(ON), leading to minimal power dissipation and improved efficiency.
  • Fast Switching Speed: Enables rapid switching transitions, beneficial for applications requiring precise control.

Advantages and Disadvantages

Advantages

  • High current-carrying capability
  • Low on-state resistance
  • Efficient thermal performance
  • Fast switching speed

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Requires careful handling due to sensitivity to static electricity

Working Principles

The IRL60HS118 operates based on the principle of field-effect transistors, where the flow of current between the drain and source terminals is controlled by the voltage applied to the gate terminal. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through, acting as a switch or an amplifier depending on the circuit configuration.

Detailed Application Field Plans

The IRL60HS118 finds extensive use in various applications including: - Switching Power Supplies: Utilized for efficient power conversion in SMPS (Switched Mode Power Supplies). - Motor Control: Enables precise control of motor speed and direction in industrial and automotive systems. - Electronic Load Switching: Used for turning on/off electronic loads in consumer electronics and industrial equipment. - Audio Amplifiers: Employed for amplifying audio signals in high-power audio systems.

Detailed and Complete Alternative Models

Some alternative models to the IRL60HS118 include: - IRLB8748PbF: Similar power MOSFET with lower RDS(ON) and higher voltage rating. - IRF3205: Widely used power MOSFET with comparable characteristics and lower cost. - IRL540N: Suitable alternative with lower current rating but cost-effective for certain applications.

In conclusion, the IRL60HS118 power MOSFET offers high-performance characteristics suitable for a wide range of power management applications, despite its higher cost and sensitivity to static electricity. Its efficient operation, fast switching speed, and high current capability make it a preferred choice for demanding electronic circuits.

Word Count: 591

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IRL60HS118 i tekniske løsninger

  1. What is IRL60HS118?

    • IRL60HS118 is a power MOSFET transistor designed for use in various technical solutions, particularly in power management and switching applications.

  2. What are the key specifications of IRL60HS118?

    • The IRL60HS118 features a low on-state resistance, high current capability, and a rugged design suitable for demanding applications.

  3. What are the typical applications of IRL60HS118?

    • Common applications include motor control, power supplies, DC-DC converters, and other power management systems.

  4. What is the maximum voltage and current rating for IRL60HS118?

    • The maximum voltage rating is typically around 100V, and the current rating can be up to several tens of amperes, depending on the specific model.

  5. How does IRL60HS118 compare to similar MOSFET transistors?

    • IRL60HS118 offers a balance of low on-state resistance, high current handling, and robustness, making it suitable for a wide range of technical solutions.

  6. What are the thermal considerations for using IRL60HS118 in a design?

    • Proper heat sinking and thermal management are important to ensure the IRL60HS118 operates within its specified temperature limits for reliable performance.

  7. Are there any application notes or reference designs available for IRL60HS118?

    • Yes, manufacturers often provide application notes and reference designs to assist engineers in implementing IRL60HS118 in their technical solutions.

  8. Can I use IRL60HS118 in automotive applications?

    • Some variants of IRL60HS118 may be suitable for automotive applications, but it's important to verify that the specific model meets automotive industry standards.

  9. What are the typical switching characteristics of IRL60HS118?

    • The IRL60HS118 exhibits fast switching speeds and low gate charge, making it well-suited for high-frequency switching applications.

  10. Where can I purchase IRL60HS118 and related evaluation boards or development kits?

    • IRL60HS118 and associated evaluation boards or development kits are available through authorized distributors and directly from the manufacturer's website.