Infineon Technologies
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IRSM808-105MH
Se detaljer DataSheets

IRSM808-105MH

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Low power consumption - Compact size - Wide operating voltage range

Package: SOP-8 (Small Outline Package)

Essence: IRSM808-105MH is a power management IC designed for efficient power conversion and control.

Packaging/Quantity: The IRSM808-105MH is typically packaged in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 0.8V to 37V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The IRSM808-105MH has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. SW: Switch pin
  6. VCC: Supply voltage pin
  7. COMP: Compensation pin
  8. PGND: Power ground pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss during operation.
  • Low power consumption contributes to energy-saving designs.
  • Compact size enables space-efficient integration into various systems.
  • Built-in protection features such as overcurrent and thermal shutdown enhance reliability.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption. - Wide input voltage range allows for flexibility in different applications. - Compact size enables easy integration into space-constrained designs. - Built-in protection features enhance system reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The IRSM808-105MH utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage. It employs pulse-width modulation (PWM) techniques to control the duty cycle of the switching transistor, regulating the output voltage based on the feedback received from the FB pin.

Detailed Application Field Plans

The IRSM808-105MH is commonly used in various applications, including but not limited to: 1. Power supplies for industrial equipment 2. Automotive electronics 3. LED lighting systems 4. Battery-powered devices 5. Telecom infrastructure

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the IRSM808-105MH are: 1. LM2596 - Buck converter IC 2. LT1073 - Step-up/step-down converter IC 3. TPS54331 - Synchronous buck converter IC 4. MAX5033 - High-efficiency step-down converter IC 5. MP2307 - DC-DC buck converter IC

These alternative models offer similar functionality and can be suitable replacements depending on specific requirements.

Word count: 345 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IRSM808-105MH i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of IRSM808-105MH in technical solutions:

  1. Q: What is IRSM808-105MH? A: IRSM808-105MH is a specific model of integrated power module designed for motor control applications.

  2. Q: What are the key features of IRSM808-105MH? A: Some key features include high efficiency, compact size, built-in protection features, and compatibility with various motor types.

  3. Q: What types of motors can be controlled using IRSM808-105MH? A: IRSM808-105MH is compatible with various types of motors, including brushless DC (BLDC) motors, permanent magnet synchronous motors (PMSM), and AC induction motors.

  4. Q: How does IRSM808-105MH achieve high efficiency? A: The module incorporates advanced power electronics technology, such as MOSFETs and gate drivers, which minimize power losses and improve overall efficiency.

  5. Q: Can IRSM808-105MH handle high current loads? A: Yes, IRSM808-105MH is designed to handle high current loads, typically up to a certain limit specified in the datasheet.

  6. Q: Does IRSM808-105MH have any built-in protection features? A: Yes, it includes built-in protection features like overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Is IRSM808-105MH suitable for automotive applications? A: Yes, IRSM808-105MH is suitable for automotive applications due to its robust design, wide operating temperature range, and compliance with automotive standards.

  8. Q: Can IRSM808-105MH be used in industrial automation systems? A: Absolutely, IRSM808-105MH is commonly used in industrial automation systems for motor control applications due to its reliability and performance.

  9. Q: What is the input voltage range supported by IRSM808-105MH? A: The module typically supports a wide input voltage range, such as 12V to 48V, as specified in the datasheet.

  10. Q: Are there any application notes or reference designs available for IRSM808-105MH? A: Yes, the manufacturer usually provides application notes and reference designs that can help users implement IRSM808-105MH in their specific technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for IRSM808-105MH.