Intersil
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
ISL28130CEZ-T7A
Se detaljer DataSheets

ISL28130CEZ-T7A

Product Overview

Category

ISL28130CEZ-T7A belongs to the category of integrated operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits and systems where amplification of signals is required.

Characteristics

  • High gain: The ISL28130CEZ-T7A offers a high voltage gain, making it suitable for applications requiring signal amplification.
  • Low noise: This op-amp has low input-referred noise, ensuring accurate signal processing.
  • Wide bandwidth: With a wide bandwidth, this device can handle high-frequency signals effectively.
  • Low power consumption: The ISL28130CEZ-T7A is designed to operate with low power consumption, making it suitable for battery-powered applications.

Package

The ISL28130CEZ-T7A comes in a small outline package (SOIC) form factor, which allows for easy integration into circuit boards.

Essence

The essence of the ISL28130CEZ-T7A lies in its ability to amplify weak signals accurately and efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: ±2.5V to ±18V
  • Input Offset Voltage: 1.5mV (maximum)
  • Input Bias Current: 10nA (maximum)
  • Gain Bandwidth Product: 3MHz
  • Slew Rate: 1.6V/µs
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ISL28130CEZ-T7A has a standard pin configuration with eight pins:

  1. V- (Negative Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V+ (Positive Power Supply)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. V- (Negative Power Supply)

Functional Features

  • Rail-to-Rail Inputs and Outputs: The ISL28130CEZ-T7A supports input and output signals that can swing close to the power supply rails, allowing for maximum signal range.
  • Unity-Gain Stable: This op-amp is stable with a gain of 1, making it suitable for applications requiring unity gain configurations.
  • Low Distortion: The device exhibits low harmonic distortion, ensuring accurate signal reproduction.

Advantages and Disadvantages

Advantages

  • High voltage gain
  • Low noise performance
  • Wide bandwidth
  • Low power consumption
  • Rail-to-rail inputs and outputs

Disadvantages

  • Limited supply voltage range compared to some other op-amps
  • Relatively low slew rate

Working Principles

The ISL28130CEZ-T7A operates based on the principles of differential amplification. It amplifies the voltage difference between its inverting and non-inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

The ISL28130CEZ-T7A finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Instrumentation amplifiers

Detailed and Complete Alternative Models

  1. LM358: This dual operational amplifier offers similar characteristics and is widely used in various applications.
  2. MCP6002: Another alternative, this op-amp provides low power consumption and rail-to-rail inputs/outputs.
  3. TL072: This JFET-input operational amplifier is known for its low noise performance and high slew rate.

These alternative models can be considered depending on specific application requirements.

Word count: 520 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af ISL28130CEZ-T7A i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of ISL28130CEZ-T7A in technical solutions:

  1. Q: What is ISL28130CEZ-T7A? A: ISL28130CEZ-T7A is a precision operational amplifier (op-amp) designed for use in various technical applications.

  2. Q: What are the key features of ISL28130CEZ-T7A? A: Some key features include low offset voltage, low input bias current, high open-loop gain, wide supply voltage range, and rail-to-rail inputs and outputs.

  3. Q: What are the typical applications of ISL28130CEZ-T7A? A: ISL28130CEZ-T7A can be used in applications such as sensor signal conditioning, data acquisition systems, medical instrumentation, and audio amplification.

  4. Q: What is the supply voltage range for ISL28130CEZ-T7A? A: The supply voltage range is typically between 2.7V and 36V.

  5. Q: What is the input offset voltage of ISL28130CEZ-T7A? A: The input offset voltage is typically around 500µV.

  6. Q: Can ISL28130CEZ-T7A operate with a single power supply? A: Yes, ISL28130CEZ-T7A can operate with a single power supply, making it suitable for battery-powered applications.

  7. Q: What is the maximum output current of ISL28130CEZ-T7A? A: The maximum output current is typically around 40mA.

  8. Q: Does ISL28130CEZ-T7A have built-in protection features? A: Yes, ISL28130CEZ-T7A has built-in protection features such as thermal shutdown and short-circuit protection.

  9. Q: What is the operating temperature range for ISL28130CEZ-T7A? A: The operating temperature range is typically between -40°C and +125°C.

  10. Q: Is ISL28130CEZ-T7A available in a surface-mount package? A: Yes, ISL28130CEZ-T7A is available in a small outline integrated circuit (SOIC) surface-mount package.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of ISL28130CEZ-T7A.