Intersil
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
ISL6613CB
Se detaljer DataSheets

ISL6613CB

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low power consumption - Compact size - Wide input voltage range

Package: Chip-scale package (CSP)

Essence: The ISL6613CB is a power management IC designed for efficient power conversion and regulation.

Packaging/Quantity: The ISL6613CB is available in a CSP package and is typically sold in reels of 2500 units.

Specifications

The ISL6613CB has the following specifications:

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6613CB has a total of 16 pins, which are configured as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Power supply pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. EN: Enable pin
  8. PGND: Power ground pin
  9. BOOT: Bootstrap pin
  10. LX: Switching node pin
  11. AGND: Analog ground pin
  12. CS: Current sense pin
  13. OCSET: Overcurrent protection pin
  14. VREF: Reference voltage pin
  15. RT: Timing resistor pin
  16. CT: Timing capacitor pin

Functional Features

The ISL6613CB offers the following functional features:

  • High-efficiency synchronous buck converter
  • Adjustable output voltage
  • Overcurrent protection
  • Soft-start function
  • Enable/disable control
  • Voltage reference for precise regulation

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide input voltage range provides flexibility in various applications

Disadvantages: - Limited maximum output current of 3A may not be suitable for high-power applications - Requires external components for proper operation

Working Principles

The ISL6613CB operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage efficiently. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage accurately. The IC incorporates various protection features such as overcurrent protection to ensure safe operation.

Detailed Application Field Plans

The ISL6613CB is commonly used in the following application fields:

  1. Power supplies for computer peripherals
  2. Industrial automation systems
  3. Telecommunications equipment
  4. Consumer electronics
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ISL6613CB are:

  1. LTC3636: Power management IC with adjustable output voltage and high efficiency.
  2. TPS54332: Synchronous buck converter IC with wide input voltage range and compact package.
  3. MAX17503: Integrated power management IC with overcurrent protection and soft-start function.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 335 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af ISL6613CB i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of ISL6613CB in technical solutions:

  1. Q: What is ISL6613CB? A: ISL6613CB is a high-performance dual MOSFET driver designed for driving two N-channel power MOSFETs in a synchronous buck or half-bridge configuration.

  2. Q: What is the maximum operating voltage of ISL6613CB? A: The maximum operating voltage of ISL6613CB is typically 18V.

  3. Q: What is the typical output current capability of ISL6613CB? A: ISL6613CB can typically provide an output current capability of up to 6A.

  4. Q: Can ISL6613CB be used in automotive applications? A: Yes, ISL6613CB is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  5. Q: What is the purpose of using ISL6613CB in a synchronous buck converter? A: ISL6613CB is used to drive the high-side and low-side MOSFETs in a synchronous buck converter, enabling efficient power conversion.

  6. Q: Does ISL6613CB have built-in protection features? A: Yes, ISL6613CB includes various protection features such as overcurrent protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can ISL6613CB operate at high switching frequencies? A: Yes, ISL6613CB is designed to operate at high switching frequencies, making it suitable for applications that require fast switching.

  8. Q: How can I control the dead time between the high-side and low-side MOSFETs using ISL6613CB? A: ISL6613CB provides a dead-time control pin that allows you to adjust the dead time between the high-side and low-side MOSFETs.

  9. Q: Can ISL6613CB be used in half-bridge configurations? A: Yes, ISL6613CB can be used in half-bridge configurations, making it suitable for applications such as motor drives and power inverters.

  10. Q: What is the recommended operating temperature range for ISL6613CB? A: The recommended operating temperature range for ISL6613CB is typically -40°C to +125°C.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of ISL6613CB.