Intersil
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
ISL9209CIRZ
Se detaljer DataSheets

ISL9209CIRZ

Product Overview

Category

ISL9209CIRZ belongs to the category of integrated circuits (ICs).

Use

It is primarily used for power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL9209CIRZ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL9209CIRZ lies in its ability to efficiently manage power in various applications.

Packaging/Quantity

ISL9209CIRZ is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Quiescent Current: 30µA (typical)
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL9209CIRZ has a total of 8 pins, which are as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PGND: Power ground pin
  7. SW: Switching node pin
  8. LX: Inductor connection pin

Functional Features

  • Adjustable output voltage through feedback pin
  • Overcurrent protection prevents damage to the circuit
  • Thermal shutdown protection safeguards against overheating
  • Wide input voltage range allows for versatile applications
  • Low quiescent current ensures minimal power consumption

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss
  • Wide input voltage range accommodates various power sources
  • Adjustable output voltage provides flexibility in different applications

Disadvantages

  • Limited output voltage range may not be suitable for certain applications
  • Relatively small package size may pose challenges during assembly and soldering

Working Principles

ISL9209CIRZ operates as a step-down (buck) voltage regulator. It takes an input voltage from the VIN pin, converts it to a lower output voltage, and delivers it through the VOUT pin. The feedback pin (FB) allows for adjustable output voltage control. The device incorporates overcurrent protection and thermal shutdown mechanisms to ensure safe operation.

Detailed Application Field Plans

ISL9209CIRZ finds applications in various fields, including but not limited to: 1. Portable electronic devices 2. Battery-powered systems 3. IoT devices 4. Industrial automation 5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9209CIRZ are: 1. LM2596S-ADJ 2. TPS54331 3. LT1763 4. MAX5033 5. AP6503

These models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 370 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af ISL9209CIRZ i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of ISL9209CIRZ in technical solutions:

  1. Question: What is ISL9209CIRZ?
    Answer: ISL9209CIRZ is a highly integrated, low-power, single-cell Li-ion battery charger IC.

  2. Question: What is the input voltage range for ISL9209CIRZ?
    Answer: The input voltage range for ISL9209CIRZ is typically between 4.35V and 6.5V.

  3. Question: Can ISL9209CIRZ charge multiple batteries simultaneously?
    Answer: No, ISL9209CIRZ is designed to charge a single-cell Li-ion battery at a time.

  4. Question: What is the maximum charging current supported by ISL9209CIRZ?
    Answer: The maximum charging current supported by ISL9209CIRZ is typically 1.2A.

  5. Question: Does ISL9209CIRZ have built-in thermal protection?
    Answer: Yes, ISL9209CIRZ has built-in thermal protection to prevent overheating during charging.

  6. Question: Can ISL9209CIRZ be used in portable electronic devices?
    Answer: Yes, ISL9209CIRZ is commonly used in portable electronic devices like smartphones, tablets, and wearables.

  7. Question: Does ISL9209CIRZ support USB charging?
    Answer: Yes, ISL9209CIRZ supports USB charging and can be connected to a USB power source.

  8. Question: Is ISL9209CIRZ compatible with different battery chemistries?
    Answer: No, ISL9209CIRZ is specifically designed for Li-ion batteries and may not be compatible with other chemistries.

  9. Question: Can ISL9209CIRZ operate in a wide temperature range?
    Answer: Yes, ISL9209CIRZ is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  10. Question: Does ISL9209CIRZ provide charging status indication?
    Answer: Yes, ISL9209CIRZ provides charging status indication through various pins or LEDs for easy monitoring.

Please note that the answers provided here are general and may vary depending on the specific implementation and datasheet of ISL9209CIRZ.