Intersil
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
X9315TMI-2.7T2
Se detaljer DataSheets

X9315TMI-2.7T2

Product Overview

Category

X9315TMI-2.7T2 belongs to the category of electronic components.

Use

This product is commonly used in various electronic devices and circuits for digital potentiometer applications.

Characteristics

  • X9315TMI-2.7T2 is a digital potentiometer with non-volatile memory.
  • It offers high precision and reliability in adjusting resistance values.
  • The device operates at a voltage range of 2.7V to 5.5V, making it suitable for low-power applications.
  • It has a small form factor and is easy to integrate into circuit designs.

Package

X9315TMI-2.7T2 is available in a compact surface-mount package.

Essence

The essence of X9315TMI-2.7T2 lies in its ability to provide a digitally controlled variable resistance, allowing precise adjustment of electrical signals in electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, containing a specific quantity of units per package.

Specifications

  • Operating Voltage Range: 2.7V to 5.5V
  • Resistance Range: Programmable from 0Ω to maximum specified value
  • Resolution: 256 taps
  • Temperature Range: -40°C to +85°C
  • Non-Volatile Memory: Stores wiper position during power-off
  • Endurance: 100,000 write cycles
  • Package Type: Surface Mount

Detailed Pin Configuration

The X9315TMI-2.7T2 digital potentiometer has the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select input
  4. SCLK: Serial clock input
  5. SDI: Serial data input
  6. SDO: Serial data output
  7. H0, H1: Terminal A connection for the potentiometer
  8. W: Wiper terminal connection for the potentiometer
  9. L0, L1: Terminal B connection for the potentiometer

Functional Features

  • X9315TMI-2.7T2 provides a digitally controlled variable resistance that can be adjusted using serial communication.
  • The non-volatile memory feature allows the device to retain its wiper position even when power is turned off.
  • It offers high precision and resolution with 256 taps, enabling fine-grained adjustment of resistance values.
  • The device operates over a wide temperature range, making it suitable for various environmental conditions.

Advantages and Disadvantages

Advantages

  • High precision and resolution
  • Non-volatile memory for retaining wiper position
  • Wide operating voltage range
  • Small form factor for easy integration

Disadvantages

  • Limited endurance of 100,000 write cycles
  • Requires serial communication for adjustment

Working Principles

X9315TMI-2.7T2 utilizes digital potentiometer technology to adjust resistance values. It consists of a resistive ladder network and a wiper that moves along the ladder based on the digital control signals received. The position of the wiper determines the effective resistance between the two terminals. The device communicates with an external microcontroller or digital circuitry through the serial interface, allowing precise adjustment of resistance values.

Detailed Application Field Plans

X9315TMI-2.7T2 finds applications in various fields, including:

  1. Audio Equipment: Used for volume control and tone adjustment in audio amplifiers and mixers.
  2. Industrial Automation: Employed in control systems for precise calibration and adjustment of sensor outputs.
  3. Test and Measurement Instruments: Integrated into equipment for signal conditioning and calibration purposes.
  4. Communication Systems: Used for gain control and impedance matching in RF circuits and transceivers.
  5. Automotive Electronics: Incorporated into vehicle systems for controlling lighting intensity, motor speed, and other adjustable parameters.

Detailed and Complete Alternative Models

  1. X9315WMI-2.7T1: Similar to X9315TMI-2.7T2 with different package type (SOIC) and pin configuration.
  2. X9315ZMI-2.7T3: Higher endurance version of X9315TMI-2.7T2 with 1 million write cycles.
  3. X9315UMI-2.7T4: Ultra-miniature digital potentiometer with reduced form factor and lower resistance range.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 536 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af X9315TMI-2.7T2 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of X9315TMI-2.7T2 in technical solutions:

  1. Q: What is the X9315TMI-2.7T2? A: The X9315TMI-2.7T2 is a digitally controlled potentiometer, commonly known as a digital potentiometer. It is used for various applications where precise resistance adjustments are required.

  2. Q: What are the key features of the X9315TMI-2.7T2? A: The key features include a 10kΩ resistance range, 256 tap points, non-volatile memory, low power consumption, and compatibility with both serial and parallel interfaces.

  3. Q: How can I control the X9315TMI-2.7T2? A: The X9315TMI-2.7T2 can be controlled using either a serial interface (SPI) or a parallel interface. You can send commands to adjust the resistance value or store settings in its non-volatile memory.

  4. Q: What are some typical applications of the X9315TMI-2.7T2? A: The X9315TMI-2.7T2 is commonly used in audio equipment, instrumentation, industrial control systems, and other applications where precise resistance adjustments are needed.

  5. Q: Can the X9315TMI-2.7T2 replace a mechanical potentiometer? A: Yes, the X9315TMI-2.7T2 can be used as a replacement for mechanical potentiometers. It offers advantages such as smaller size, higher reliability, and the ability to store settings.

  6. Q: How accurate is the X9315TMI-2.7T2? A: The X9315TMI-2.7T2 has a typical resistance tolerance of ±20% and a temperature coefficient of 100ppm/°C. It provides good accuracy for most applications.

  7. Q: Can I cascade multiple X9315TMI-2.7T2 devices together? A: Yes, you can cascade multiple X9315TMI-2.7T2 devices to increase the number of tap points or achieve higher resolution in your application.

  8. Q: Is the X9315TMI-2.7T2 suitable for low-power applications? A: Yes, the X9315TMI-2.7T2 is designed for low-power operation. It has a standby current of less than 1µA and operates at a supply voltage range of 2.7V to 5.5V.

  9. Q: Does the X9315TMI-2.7T2 have any protection features? A: Yes, the X9315TMI-2.7T2 includes features like overvoltage protection, latch-up immunity, and ESD protection, which help safeguard it against electrical faults.

  10. Q: Where can I find more information about the X9315TMI-2.7T2? A: You can refer to the datasheet provided by the manufacturer, which contains detailed information about the X9315TMI-2.7T2's specifications, pinout, and application examples.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases of the X9315TMI-2.7T2 in different technical solutions.