Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IS25WP128-JLLE-TR

IS25WP128-JLLE-TR

Product Overview

Category

IS25WP128-JLLE-TR belongs to the category of Serial NOR Flash Memory.

Use

This product is primarily used for storing and retrieving data in electronic devices such as computers, smartphones, tablets, and other consumer electronics.

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Low power consumption
  • Compact size
  • Wide operating temperature range

Package

IS25WP128-JLLE-TR is available in a small form factor package, making it suitable for space-constrained applications. The package type is JLLE-TR.

Essence

The essence of IS25WP128-JLLE-TR lies in its ability to provide reliable and fast data storage in a compact and energy-efficient manner.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Memory Capacity: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Transfer Rate: Up to 104 MHz
  • Erase/Program Time: 4ms/1.5ms (typical)

Detailed Pin Configuration

The IS25WP128-JLLE-TR has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • Fast read access time
  • Sector erase and program operations
  • Protection mechanisms against accidental data modification
  • Software and hardware write protection options
  • Deep power-down mode for ultra-low power consumption

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables quick access to stored information.
  • Non-volatile memory ensures data retention even when power is disconnected.
  • Low power consumption prolongs battery life in portable devices.
  • Compact size allows for integration into space-constrained designs.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower erase and program times compared to some alternatives.
  • Vulnerable to physical damage, such as electrostatic discharge (ESD).

Working Principles

IS25WP128-JLLE-TR utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even without power. The SPI interface allows for high-speed data transfer between the memory and the host, enabling efficient read and write operations.

Detailed Application Field Plans

IS25WP128-JLLE-TR finds applications in various electronic devices, including but not limited to: - Computers and laptops - Smartphones and tablets - Digital cameras - Gaming consoles - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to IS25WP128-JLLE-TR include: - W25Q128JVSIQ (Winbond) - S25FL128SAGMFI011 (Cypress Semiconductor) - MX25L12835FM2I-10G (Macronix)

These alternatives offer similar functionality and specifications, providing options for different design requirements.

Word count: 410 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IS25WP128-JLLE-TR i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of IS25WP128-JLLE-TR in technical solutions:

  1. Q: What is IS25WP128-JLLE-TR? A: IS25WP128-JLLE-TR is a specific model of Serial NOR Flash memory chip manufactured by Integrated Silicon Solution Inc. It offers 128Mb (16MB) storage capacity.

  2. Q: What are the typical applications of IS25WP128-JLLE-TR? A: IS25WP128-JLLE-TR is commonly used in various electronic devices such as automotive systems, industrial automation, consumer electronics, networking equipment, and IoT devices.

  3. Q: What is the interface protocol supported by IS25WP128-JLLE-TR? A: IS25WP128-JLLE-TR supports the Serial Peripheral Interface (SPI) protocol, which allows for high-speed data transfer between the flash memory and the microcontroller.

  4. Q: What is the operating voltage range of IS25WP128-JLLE-TR? A: The operating voltage range of IS25WP128-JLLE-TR is typically from 2.7V to 3.6V.

  5. Q: What is the maximum clock frequency supported by IS25WP128-JLLE-TR? A: IS25WP128-JLLE-TR can support clock frequencies up to 104MHz, enabling fast read and write operations.

  6. Q: Does IS25WP128-JLLE-TR support hardware and software protection features? A: Yes, IS25WP128-JLLE-TR provides hardware and software protection mechanisms like write protection, block protection, and password protection to secure the stored data.

  7. Q: Can IS25WP128-JLLE-TR operate in extreme temperature conditions? A: Yes, IS25WP128-JLLE-TR is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  8. Q: What is the erase and program endurance of IS25WP128-JLLE-TR? A: IS25WP128-JLLE-TR has a high endurance capability, typically supporting up to 100,000 erase/program cycles per sector.

  9. Q: Does IS25WP128-JLLE-TR have any additional features for enhanced performance? A: Yes, IS25WP128-JLLE-TR includes features like fast read, dual output read, and continuous read modes to optimize data access speed.

  10. Q: Is IS25WP128-JLLE-TR RoHS compliant? A: Yes, IS25WP128-JLLE-TR is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.

Please note that the answers provided here are general and may vary depending on the specific datasheet and technical documentation of IS25WP128-JLLE-TR.