IXYS
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IXFA130N15X3
Se detaljer DataSheets

IXFA130N15X3

Product Overview

Category: Power MOSFET
Use: High-power switching applications
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Power efficiency and reliability
Packaging/Quantity: Standard packaging, quantity varies

Specifications

  • Voltage Rating: 150V
  • Current Rating: 130A
  • RDS(ON): 3mΩ
  • Gate Charge: 160nC
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low on-resistance
  • Fast switching speed
  • High power dissipation capability
  • Enhanced thermal performance

Advantages and Disadvantages

Advantages: - High power handling capacity - Low conduction losses - Suitable for high-frequency applications

Disadvantages: - Higher cost compared to standard MOSFETs - Requires careful thermal management

Working Principles

The IXFA130N15X3 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient gate-source voltage is applied, the MOSFET enters the "on" state, allowing current to flow through it.

Detailed Application Field Plans

The IXFA130N15X3 is ideal for use in various high-power applications such as: - Switched-mode power supplies - Motor control systems - Solar inverters - Electric vehicle powertrains

Detailed and Complete Alternative Models

  1. IXFN140N30X3
    • Voltage Rating: 300V
    • Current Rating: 140A
    • RDS(ON): 4.5mΩ
    • Package: TO-247
  2. IXFH180N10T
    • Voltage Rating: 100V
    • Current Rating: 180A
    • RDS(ON): 1.8mΩ
    • Package: D2PAK

This completes the English editing encyclopedia entry structure for IXFA130N15X3, providing comprehensive information about the product, its specifications, features, and application fields.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IXFA130N15X3 i tekniske løsninger

  1. What is IXFA130N15X3?

    • IXFA130N15X3 is a high-power MOSFET transistor designed for use in various technical solutions, such as power supplies and motor control.

  2. What are the key specifications of IXFA130N15X3?

    • The key specifications include a voltage rating of 1500V, a current rating of 130A, and a low on-state resistance for efficient power handling.

  3. In what applications can IXFA130N15X3 be used?

    • IXFA130N15X3 is commonly used in applications such as industrial motor drives, solar inverters, welding equipment, and power supplies for electric vehicles.

  4. How does IXFA130N15X3 contribute to energy efficiency in technical solutions?

    • IXFA130N15X3's low on-state resistance and high current capability help minimize power losses and improve overall energy efficiency in various applications.

  5. What are the thermal considerations when using IXFA130N15X3?

    • Proper thermal management is essential due to the high power dissipation of IXFA130N15X3. Adequate heat sinking and cooling measures should be implemented to ensure reliable operation.

  6. Are there any recommended circuit configurations for utilizing IXFA130N15X3?

    • Yes, application notes and datasheets provide recommended circuit configurations, including gate drive requirements and protection circuitry to optimize performance and reliability.

  7. What are the typical challenges encountered when integrating IXFA130N15X3 into technical solutions?

    • Challenges may include managing high currents, ensuring proper gate drive signals, and addressing thermal management to maintain safe operating temperatures.

  8. Does IXFA130N15X3 have built-in protection features?

    • While IXFA130N15X3 itself may not have built-in protection features, external circuitry can be implemented for overcurrent protection, overvoltage protection, and other safety measures.

  9. Can IXFA130N15X3 be paralleled for higher current applications?

    • Yes, IXFA130N15X3 can be paralleled to increase current-handling capability, but careful attention must be paid to matching characteristics and ensuring balanced current sharing.

  10. Where can I find additional resources and support for designing with IXFA130N15X3?

    • Additional resources, including application notes, design guides, and technical support, are available from the manufacturer's website and authorized distributors.