IXYS
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IXGH100N30C3
Se detaljer DataSheets

IXGH100N30C3

Product Overview

Category

The IXGH100N30C3 belongs to the category of power semiconductor devices.

Use

It is used for high-power switching applications in various electronic systems and equipment.

Characteristics

  • High voltage and current handling capability
  • Low on-state resistance
  • Fast switching speed
  • Robust and reliable performance

Package

The IXGH100N30C3 is typically available in a TO-247 package.

Essence

This product is essential for controlling and managing high levels of power in electronic circuits.

Packaging/Quantity

The IXGH100N30C3 is commonly packaged individually and is available in varying quantities depending on the supplier.

Specifications

  • Voltage Rating: 300V
  • Current Rating: 100A
  • Package Type: TO-247
  • Switching Speed: <100ns
  • On-State Resistance: <0.1Ω

Detailed Pin Configuration

The IXGH100N30C3 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage and current handling capacity
  • Fast switching speed for efficient operation
  • Low on-state resistance for reduced power loss
  • Robust construction for reliability in demanding applications

Advantages

  • Suitable for high-power applications
  • Fast and efficient switching capabilities
  • Low power dissipation
  • Reliable performance under high-stress conditions

Disadvantages

  • May require additional heat management due to high power dissipation
  • Higher cost compared to lower power devices

Working Principles

The IXGH100N30C3 operates based on the principles of field-effect transistors, utilizing its gate, drain, and source terminals to control the flow of high-power currents through the device.

Detailed Application Field Plans

The IXGH100N30C3 is commonly used in the following applications: - Motor drives - Power supplies - Inverters - Industrial automation systems - Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models to the IXGH100N30C3 include: - IXGH80N60C3 - IXGH120N20T - IXGH50N60B3

In conclusion, the IXGH100N30C3 is a high-power semiconductor device with robust characteristics and versatile applications, making it an essential component in various electronic systems and equipment.

[Word Count: 315]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IXGH100N30C3 i tekniske løsninger

  1. What is the maximum voltage rating of IXGH100N30C3?

    • The maximum voltage rating of IXGH100N30C3 is 300V.

  2. What is the maximum continuous drain current of IXGH100N30C3?

    • The maximum continuous drain current of IXGH100N30C3 is 100A.

  3. What type of package does IXGH100N30C3 come in?

    • IXGH100N30C3 comes in a TO-247 package.

  4. What are the typical applications for IXGH100N30C3?

    • IXGH100N30C3 is commonly used in motor drives, inverters, and power supplies.

  5. What is the on-state voltage of IXGH100N30C3 at the rated current?

    • The on-state voltage of IXGH100N30C3 at the rated current is typically 1.8V.

  6. Does IXGH100N30C3 require a heat sink for operation?

    • Yes, IXGH100N30C3 typically requires a heat sink for efficient operation.

  7. What is the maximum junction temperature for IXGH100N30C3?

    • The maximum junction temperature for IXGH100N30C3 is 150°C.

  8. Is IXGH100N30C3 suitable for high-frequency switching applications?

    • Yes, IXGH100N30C3 is suitable for high-frequency switching applications.

  9. What is the gate-source threshold voltage of IXGH100N30C3?

    • The gate-source threshold voltage of IXGH100N30C3 is typically 4V.

  10. Can IXGH100N30C3 be used in parallel to increase current handling capability?

    • Yes, IXGH100N30C3 can be used in parallel to increase current handling capability. However, proper attention should be given to current sharing and thermal management.