Linear Technology/Analog Devices
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
LT1460CCMS8-2.5#PBF
Se detaljer DataSheets

LT1460CCMS8-2.5#PBF

Product Overview

Category

LT1460CCMS8-2.5#PBF belongs to the category of voltage references.

Use

This product is primarily used as a precision voltage reference in various electronic circuits.

Characteristics

  • High accuracy and stability
  • Low temperature coefficient
  • Low output noise
  • Wide operating temperature range
  • Small package size

Package

LT1460CCMS8-2.5#PBF is available in an 8-pin MSOP package.

Essence

The essence of LT1460CCMS8-2.5#PBF lies in its ability to provide a precise and stable voltage reference, ensuring accurate performance of electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 10ppm/°C
  • Output Noise: 4µVrms (10Hz to 100kHz)
  • Operating Temperature Range: -40°C to 125°C
  • Supply Voltage Range: 2.7V to 36V
  • Quiescent Current: 80µA

Detailed Pin Configuration

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. NC: No Connection
  5. NC: No Connection
  6. NC: No Connection
  7. VIN: Input Voltage
  8. NC: No Connection

Functional Features

  • Precise and stable output voltage
  • Low temperature coefficient ensures minimal drift over temperature variations
  • Low output noise for improved signal integrity
  • Wide operating temperature range allows for use in various environments
  • Low quiescent current minimizes power consumption

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Low temperature coefficient
  • Wide operating temperature range
  • Small package size

Disadvantages

  • Limited output voltage options (only 2.5V in this model)
  • Relatively higher cost compared to some alternatives

Working Principles

LT1460CCMS8-2.5#PBF utilizes a precision bandgap reference circuit to generate a stable voltage output. It compensates for temperature variations by employing temperature-dependent components, ensuring accurate performance across different operating conditions.

Detailed Application Field Plans

LT1460CCMS8-2.5#PBF finds applications in various electronic systems that require precise voltage references. Some common application fields include: - Analog-to-digital converters (ADCs) - Digital-to-analog converters (DACs) - Voltage regulators - Oscillators - Sensor interfaces

Detailed and Complete Alternative Models

  1. LT1460CCMS8-1.8#PBF: Output Voltage - 1.8V
  2. LT1460CCMS8-3.3#PBF: Output Voltage - 3.3V
  3. LT1460CCMS8-5#PBF: Output Voltage - 5V
  4. LT1460CCMS8-10#PBF: Output Voltage - 10V

These alternative models provide different output voltage options to suit specific application requirements.

Word count: 443 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af LT1460CCMS8-2.5#PBF i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of LT1460CCMS8-2.5#PBF in technical solutions:

  1. Question: What is the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF is a voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate 2.5V output voltage.

  2. Question: What is the typical application of the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF is commonly used as a voltage reference in various electronic circuits and systems where a stable and precise voltage reference is required.

  3. Question: What is the voltage accuracy of the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF has a voltage accuracy of ±0.4% over the specified temperature range.

  4. Question: What is the operating temperature range of the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF can operate within a temperature range of -40°C to +85°C.

  5. Question: What is the output current capability of the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF can provide an output current of up to 10mA.

  6. Question: Can the LT1460CCMS8-2.5#PBF be used in battery-powered applications?
    Answer: Yes, the LT1460CCMS8-2.5#PBF is suitable for battery-powered applications as it has low quiescent current consumption.

  7. Question: Does the LT1460CCMS8-2.5#PBF require external components for operation?
    Answer: Yes, the LT1460CCMS8-2.5#PBF requires an external bypass capacitor for stability and noise reduction.

  8. Question: Can the LT1460CCMS8-2.5#PBF be used in high-precision measurement systems?
    Answer: Yes, the LT1460CCMS8-2.5#PBF is commonly used in high-precision measurement systems where accurate voltage references are crucial.

  9. Question: What is the package type of the LT1460CCMS8-2.5#PBF?
    Answer: The LT1460CCMS8-2.5#PBF is available in an 8-pin MSOP (Mini Small Outline Package) package.

  10. Question: Are there any alternative voltage reference ICs similar to the LT1460CCMS8-2.5#PBF?
    Answer: Yes, there are other voltage reference ICs available from different manufacturers that offer similar features and performance. Some alternatives include the LM4040, REF30xx, and MAX6126 series.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for precise information.