Linear Technology/Analog Devices
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
LTC4227IUFD-2#PBF
Se detaljer DataSheets

LTC4227IUFD-2#PBF

Product Overview

Category

The LTC4227IUFD-2#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power supply and protection applications in various electronic systems.

Characteristics

  • Integrated power supply and protection functions
  • High efficiency and low power consumption
  • Wide input voltage range
  • Overvoltage and undervoltage protection
  • Current limiting and short-circuit protection
  • Thermal shutdown protection

Package

The LTC4227IUFD-2#PBF is available in a small form factor 16-pin QFN package, which ensures easy integration into compact electronic designs.

Essence

The essence of the LTC4227IUFD-2#PBF lies in its ability to provide reliable power supply and protection features, ensuring the safe operation of electronic systems.

Packaging/Quantity

This product is typically supplied in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Input Voltage Range: 2.9V to 18V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 50µA (typical)
  • Overvoltage Threshold: Adjustable from 3.3V to 15V
  • Undervoltage Threshold: Adjustable from 2.5V to 14V
  • Current Limit: Adjustable from 100mA to 1.6A

Detailed Pin Configuration

The LTC4227IUFD-2#PBF features a 16-pin QFN package with the following pin configuration:

  1. VIN1: Input Voltage 1
  2. VIN2: Input Voltage 2
  3. GND: Ground
  4. FLT1: Fault Indicator 1
  5. FLT2: Fault Indicator 2
  6. EN1: Enable Input 1
  7. EN2: Enable Input 2
  8. OV1: Overvoltage Threshold 1
  9. OV2: Overvoltage Threshold 2
  10. UV1: Undervoltage Threshold 1
  11. UV2: Undervoltage Threshold 2
  12. ILIM1: Current Limit 1
  13. ILIM2: Current Limit 2
  14. PG1: Power Good Output 1
  15. PG2: Power Good Output 2
  16. VOUT: Output Voltage

Functional Features

  • Dual input power supply selection
  • Automatic switchover between inputs
  • Overvoltage and undervoltage protection
  • Current limiting and short-circuit protection
  • Power good output indicators
  • Enable/disable control for each input

Advantages and Disadvantages

Advantages

  • Simplifies power supply design
  • Enhances system reliability and protection
  • Compact package size for space-constrained applications
  • Wide input voltage range accommodates various power sources
  • Adjustable thresholds and limits for customization

Disadvantages

  • Limited to dual input power supply applications
  • Requires careful consideration of input voltage compatibility

Working Principles

The LTC4227IUFD-2#PBF operates by continuously monitoring the input voltages and comparing them to the user-adjustable overvoltage and undervoltage thresholds. When a fault condition is detected, such as an overvoltage or undervoltage event, the device automatically switches to the alternate input source. It also provides current limiting and short-circuit protection to prevent damage to the system. The power good outputs indicate the status of each input, ensuring proper power supply operation.

Detailed Application Field Plans

The LTC4227IUFD-2#PBF finds applications in various fields, including:

  1. Industrial control systems
  2. Telecommunications equipment
  3. Automotive electronics
  4. Medical devices
  5. Consumer electronics

In industrial control systems, it can be used to ensure reliable power supply and protection for critical components. In telecommunications equipment, it enables seamless switchover between power sources to maintain uninterrupted operation. Automotive electronics benefit from its ability to handle different input voltages and protect against voltage fluctuations. Medical devices rely on its robust power management features for safe and reliable operation. Lastly, consumer electronics can utilize this IC to enhance power supply reliability and protection.

Detailed and Complete Alternative Models

  1. LTC4227IUFD-1#PBF: Single input version of the LTC4227 with similar features.
  2. LTC4226IUFD-2#PBF: Similar dual input power supply and protection IC with additional features like reverse voltage protection.
  3. LTC4228IUFD-2#PBF: Dual input power supply and protection IC with integrated hot swap controllers for added functionality.

These alternative models offer similar capabilities and can be considered based on specific application requirements.

*Word count:

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af LTC4227IUFD-2#PBF i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of LTC4227IUFD-2#PBF in technical solutions:

  1. Q: What is LTC4227IUFD-2#PBF? A: LTC4227IUFD-2#PBF is a specific model number for a power supply IC manufactured by Linear Technology (now part of Analog Devices). It is designed for hot-swappable applications and provides protection against overcurrent and reverse voltage.

  2. Q: What are the key features of LTC4227IUFD-2#PBF? A: Some key features of LTC4227IUFD-2#PBF include dual ideal diode controllers, adjustable current limit, reverse voltage protection, undervoltage lockout, and fault reporting.

  3. Q: How does LTC4227IUFD-2#PBF provide reverse voltage protection? A: LTC4227IUFD-2#PBF uses an integrated ideal diode controller to prevent reverse current flow, protecting the circuit from damage.

  4. Q: Can LTC4227IUFD-2#PBF be used for hot-swapping applications? A: Yes, LTC4227IUFD-2#PBF is specifically designed for hot-swapping applications, allowing for safe insertion and removal of power sources while the system is operational.

  5. Q: What is the purpose of adjustable current limit in LTC4227IUFD-2#PBF? A: The adjustable current limit feature allows users to set a maximum current threshold, preventing excessive current flow and protecting the system from overload conditions.

  6. Q: Does LTC4227IUFD-2#PBF have any built-in fault reporting mechanisms? A: Yes, LTC4227IUFD-2#PBF provides fault reporting through its fault output pin, which can be used to indicate overcurrent or reverse voltage conditions.

  7. Q: Can LTC4227IUFD-2#PBF be used in battery charging applications? A: Yes, LTC4227IUFD-2#PBF can be used in battery charging applications where hot-swapping and protection against reverse voltage are required.

  8. Q: What is the operating voltage range of LTC4227IUFD-2#PBF? A: LTC4227IUFD-2#PBF has an operating voltage range of 2.9V to 18V, making it suitable for a wide range of applications.

  9. Q: Is LTC4227IUFD-2#PBF available in different package options? A: Yes, LTC4227IUFD-2#PBF is available in a 16-lead QFN package, which offers compact size and good thermal performance.

  10. Q: Where can I find more information about LTC4227IUFD-2#PBF? A: You can find more detailed information about LTC4227IUFD-2#PBF, including datasheets, application notes, and technical support, on the Analog Devices website or by contacting their customer support team.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the official documentation and consult with technical experts for accurate and up-to-date information.