Littelfuse Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
LVR040S-1
Se detaljer DataSheets

LVR040S-1 Product Overview

Introduction

The LVR040S-1 is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing voltage output
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: TO-252, TO-263, SOT-223
  • Essence: Regulating voltage for various electronic applications
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 20V
  • Output Current: Up to 500mA
  • Dropout Voltage: Typically 0.3V at full load
  • Quiescent Current: Typically 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LVR040S-1 typically has three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • Internal Thermal Shutdown
  • Current Limit Protection
  • Short Circuit Protection
  • Low ESR Capacitor Compatible

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage enables efficient use of available power
  • Wide input voltage range allows for versatile applications
  • Compact package size for space-constrained designs

Disadvantages

  • Limited maximum output current compared to higher power regulators
  • Higher dropout voltage compared to some low-dropout regulators

Working Principles

The LVR040S-1 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite variations in input voltage and load conditions. It utilizes feedback control to achieve precise regulation.

Detailed Application Field Plans

The LVR040S-1 finds extensive use in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

Several alternative models to the LVR040S-1 include: - LM317: A popular adjustable linear regulator - LM1117: Low dropout voltage regulator - LT1086: High current adjustable voltage regulator - TPS7A47: Ultra-low noise linear regulator

In conclusion, the LVR040S-1 is a reliable voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

Word Count: 410

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af LVR040S-1 i tekniske løsninger

  1. What is the LVR040S-1?

    • The LVR040S-1 is a precision pressure sensor designed for use in various technical solutions where accurate pressure measurement is required.

  2. What is the operating range of the LVR040S-1?

    • The LVR040S-1 has an operating range of [0-40 psi / 0-2.8 bar], making it suitable for a wide range of applications.

  3. What output does the LVR040S-1 provide?

    • The LVR040S-1 provides a 0.5-4.5V ratiometric output, which is proportional to the applied pressure.

  4. Is the LVR040S-1 suitable for use in harsh environments?

    • Yes, the LVR040S-1 is designed to withstand harsh environments and is suitable for use in industrial and automotive applications.

  5. What is the accuracy of the LVR040S-1?

    • The LVR040S-1 offers high accuracy with a typical error of less than ±1% full scale over the operating temperature range.

  6. Can the LVR040S-1 be used for liquid pressure measurement?

    • Yes, the LVR040S-1 can be used for measuring the pressure of compatible liquids, provided they are compatible with the sensor materials.

  7. Does the LVR040S-1 require calibration?

    • The LVR040S-1 is factory calibrated, but it may benefit from occasional recalibration to maintain optimal performance.

  8. What is the response time of the LVR040S-1?

    • The LVR040S-1 has a fast response time, typically responding to pressure changes within milliseconds.

  9. Can the LVR040S-1 be integrated with microcontrollers or PLCs?

    • Yes, the LVR040S-1's ratiometric output makes it easy to interface with microcontrollers, PLCs, and other control systems.

  10. Is the LVR040S-1 suitable for OEM applications?

    • Yes, the compact size and reliable performance of the LVR040S-1 make it well-suited for integration into OEM products and systems.