Mallory Sonalert Products Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
SCE028MA3DT5B
Se detaljer DataSheets

SCE028MA3DT5B

Product Overview

Category

SCE028MA3DT5B belongs to the category of electronic components, specifically a surface mount ceramic capacitor.

Use

It is commonly used in electronic circuits for filtering, decoupling, and energy storage applications.

Characteristics

  • High capacitance
  • Low equivalent series resistance (ESR)
  • Small form factor
  • Surface mount design

Package

The SCE028MA3DT5B is typically available in tape and reel packaging for automated assembly processes.

Essence

This capacitor is essential for stabilizing voltage levels and reducing noise in electronic circuits.

Packaging/Quantity

It is usually packaged in reels containing a specific quantity, such as 1000 units per reel.

Specifications

  • Capacitance: 0.028µF
  • Voltage Rating: 50V
  • Tolerance: ±20%
  • Temperature Coefficient: X7R

Detailed Pin Configuration

The SCE028MA3DT5B has two terminals for soldering onto the circuit board. The pin configuration is as follows: - Pin 1: Positive terminal - Pin 2: Negative terminal

Functional Features

  • High capacitance density
  • Stable performance over a wide temperature range
  • Low ESR for efficient energy transfer
  • RoHS compliant

Advantages

  • Compact size saves space on the circuit board
  • Reliable performance in various environmental conditions
  • Suitable for high-frequency applications

Disadvantages

  • Limited capacitance value compared to larger capacitors
  • Tolerance of ±20% may require tighter selection for precision circuits

Working Principles

The SCE028MA3DT5B operates based on the principles of energy storage and charge/discharge cycles. When connected in a circuit, it stores electrical energy and releases it when needed to stabilize voltage fluctuations.

Detailed Application Field Plans

The SCE028MA3DT5B is widely used in the following applications: - Power supplies - Signal filtering - RF circuits - Audio amplifiers - Consumer electronics

Detailed and Complete Alternative Models

  • SCE047MA3CTB5B: Higher capacitance variant
  • SCE018MA3ST5B: Lower capacitance variant
  • SCE033MA3DT5B: Tighter tolerance variant

In conclusion, the SCE028MA3DT5B surface mount ceramic capacitor offers high capacitance and compact design, making it suitable for various electronic applications. Its stable performance and small form factor make it a popular choice for modern circuit designs.

Word Count: 386

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af SCE028MA3DT5B i tekniske løsninger

  1. What is the operating temperature range of SCE028MA3DT5B?

    • The operating temperature range of SCE028MA3DT5B is -40°C to 85°C.

  2. What is the typical capacitance value of SCE028MA3DT5B?

    • The typical capacitance value of SCE028MA3DT5B is 0.1µF.

  3. What are the typical applications for SCE028MA3DT5B?

    • SCE028MA3DT5B is commonly used in power supplies, lighting, and motor control applications.

  4. What is the voltage rating of SCE028MA3DT5B?

    • SCE028MA3DT5B has a voltage rating of 25V.

  5. Does SCE028MA3DT5B have RoHS compliance?

    • Yes, SCE028MA3DT5B is RoHS compliant.

  6. What is the equivalent series resistance (ESR) of SCE028MA3DT5B?

    • The ESR of SCE028MA3DT5B is typically 0.15 Ohms.

  7. Can SCE028MA3DT5B be used in high-frequency applications?

    • Yes, SCE028MA3DT5B is suitable for high-frequency applications.

  8. Is SCE028MA3DT5B suitable for automotive electronics?

    • Yes, SCE028MA3DT5B is suitable for use in automotive electronics.

  9. What is the package size of SCE028MA3DT5B?

    • SCE028MA3DT5B is available in a 0805 package size.

  10. Are there any recommended layout considerations for using SCE028MA3DT5B?

    • It is recommended to minimize trace lengths and keep the capacitor close to the load or source to minimize parasitic effects.