Maxim Integrated
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MAX16065ETM+TCDK
Se detaljer DataSheets

MAX16065ETM+TCDK

Product Overview

  • Category: Voltage Supervisors
  • Use: Monitoring and controlling voltage levels in electronic systems
  • Characteristics: High accuracy, low power consumption, wide input voltage range
  • Package: 6-pin TDFN (3x3)
  • Essence: Ensures reliable operation of electronic systems by monitoring voltage levels
  • Packaging/Quantity: Tape and Reel (2500 units)

Specifications

  • Input Voltage Range: 1.6V to 5.5V
  • Threshold Voltage Options: 1.8V, 2.5V, 3.3V
  • Quiescent Current: 6µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  • Pin 1: GND
  • Pin 2: Input
  • Pin 3: Reset
  • Pin 4: Open Drain Output
  • Pin 5: MR
  • Pin 6: VCC

Functional Features

  • Voltage Monitoring: Monitors the input voltage and asserts a reset signal when it falls below the threshold
  • Manual Reset Input: Allows external manual reset capability
  • Adjustable Reset Timeout Period: Provides flexibility in setting the reset timeout period
  • Low Quiescent Current: Minimizes power consumption in standby mode

Advantages and Disadvantages

Advantages

  • High accuracy in voltage monitoring
  • Wide input voltage range allows for versatile applications
  • Low power consumption enhances energy efficiency

Disadvantages

  • Limited to 6-pin package, may not suit all design requirements
  • Requires careful consideration of reset timeout period for specific applications

Working Principles

The MAX16065ETM+TCDK operates by continuously monitoring the input voltage and comparing it to the preset threshold voltage. When the input voltage falls below the threshold, the device asserts a reset signal, which can be used to initiate system recovery or safe shutdown procedures.

Detailed Application Field Plans

The MAX16065ETM+TCDK is suitable for a wide range of applications including: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics - IoT devices

Detailed and Complete Alternative Models

  • MAX16066: Offers additional features such as watchdog timer and manual reset input
  • MAX16067: Provides adjustable reset threshold and timeout options for more customization
  • MAX16068: Integrates a push-pull output for driving capacitive loads

This completes the entry for MAX16065ETM+TCDK, covering its product details, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word Count: 411

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MAX16065ETM+TCDK i tekniske løsninger

  1. What is the MAX16065ETM+TCDK?

    • The MAX16065ETM+TCDK is a voltage supervisor and sequencer IC designed for use in technical solutions to monitor and control power supply voltages.

  2. What are the key features of the MAX16065ETM+TCDK?

    • The key features include undervoltage and overvoltage monitoring, adjustable reset threshold, manual reset input, and sequencing control for multiple power supplies.

  3. How does the MAX16065ETM+TCDK help in technical solutions?

    • It helps by ensuring proper power supply sequencing, monitoring voltage levels, and providing a reliable reset signal to the system during power-up and fault conditions.

  4. What are the typical applications of the MAX16065ETM+TCDK?

    • Typical applications include servers, networking equipment, industrial automation, and other systems requiring precise power supply monitoring and sequencing.

  5. How does the MAX16065ETM+TCDK handle power supply sequencing?

    • It provides configurable delay times between different power supply rails to ensure proper sequencing and prevent potential damage to sensitive components.

  6. Can the MAX16065ETM+TCDK be used in battery-powered systems?

    • Yes, it can be used in battery-powered systems to monitor and manage the voltage levels to ensure efficient and safe operation.

  7. What is the operating voltage range of the MAX16065ETM+TCDK?

    • The operating voltage range is typically from 4V to 28V, making it suitable for a wide range of power supply applications.

  8. Does the MAX16065ETM+TCDK have built-in fault detection capabilities?

    • Yes, it has built-in fault detection for undervoltage and overvoltage conditions, providing an early warning system for potential power supply issues.

  9. Is the MAX16065ETM+TCDK easy to integrate into existing designs?

    • Yes, it comes in a compact package and offers flexibility in configuration, making it relatively easy to integrate into new or existing technical solutions.

  10. Are there any design considerations when using the MAX16065ETM+TCDK?

    • Designers should consider layout and noise immunity to ensure accurate voltage monitoring and sequencing, as well as proper thermal management due to power dissipation.