Maxim Integrated
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MAX261BEWG+
Se detaljer DataSheets

MAX261BEWG+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: The MAX261BEWG+ is a versatile integrated circuit primarily used for audio signal processing. It is commonly employed in various audio applications such as equalizers, filters, and audio effects processors.

Characteristics: - High-performance audio signal processing - Low noise and distortion levels - Wide frequency response range - Compact and space-saving package design - Easy integration into audio systems

Package: The MAX261BEWG+ is packaged in a small-sized 24-pin wide SOIC (Small Outline Integrated Circuit) package, which ensures efficient heat dissipation and ease of handling during assembly.

Essence: This IC is designed to provide high-quality audio signal processing capabilities, enabling enhanced audio performance in a wide range of applications.

Packaging/Quantity: The MAX261BEWG+ is typically available in reels containing 250 units per reel.

Specifications

The key specifications of the MAX261BEWG+ are as follows:

  • Supply Voltage Range: 4.5V to 12V
  • Operating Temperature Range: -40°C to +85°C
  • Total Harmonic Distortion (THD): <0.01%
  • Signal-to-Noise Ratio (SNR): >90dB
  • Gain Range: -20dB to +20dB
  • Frequency Response Range: 20Hz to 20kHz

Pin Configuration

The MAX261BEWG+ features a detailed pin configuration as follows:

  1. IN1: Input 1
  2. IN2: Input 2
  3. GND: Ground
  4. VCC: Power Supply
  5. OUT1: Output 1
  6. OUT2: Output 2
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection
  21. NC: No Connection
  22. NC: No Connection
  23. NC: No Connection
  24. NC: No Connection

Functional Features

The MAX261BEWG+ offers the following functional features:

  • Dual-channel audio signal processing
  • Adjustable gain control for precise audio level adjustment
  • Low-pass and high-pass filter capabilities for frequency shaping
  • Bandpass filter mode for isolating specific frequency ranges
  • High input impedance and low output impedance for seamless integration with audio systems
  • Built-in protection circuitry against overvoltage and short-circuit conditions

Advantages and Disadvantages

Advantages: - High-performance audio signal processing capabilities - Wide range of applications in audio systems - Compact package design for space-saving installations - Low noise and distortion levels for improved audio quality - Versatile gain control options for precise audio level adjustments

Disadvantages: - Limited pin configuration options for customization - Relatively higher cost compared to some alternative models - Requires basic knowledge of audio signal processing for optimal utilization

Working Principles

The MAX261BEWG+ operates based on the principles of analog signal processing. It utilizes internal circuitry to amplify, filter, and shape audio signals according to the desired settings. The gain control feature allows users to adjust the amplification level, while the various filter modes enable frequency manipulation for tailored audio output.

Detailed Application Field Plans

The MAX261BEWG+ finds extensive application in the following fields:

  1. Audio Equalizers: The IC can be used to implement equalization circuits for audio systems, enabling precise control over frequency response characteristics.

  2. Audio Effects Processors: By utilizing the built-in filter capabilities, the MAX261BEWG+ can be employed in audio effects processors to create various sound effects such as reverb, delay, and modulation.

  3. Active Crossovers: The IC can serve as a key component in active crossover networks, allowing the separation of audio signals into different frequency bands for driving multiple speakers.

  4. Tone Control Circuits: With its gain control and filtering features, the MAX261BEWG+ is suitable for constructing tone control circuits that adjust bass, midrange, and treble levels in audio systems.

Detailed and Complete Alternative Models

  1. LM833N: This dual operational amplifier offers similar audio signal processing capabilities with adjustable gain control and low noise performance.

  2. NJM2068D: Another dual operational amplifier IC that provides high-quality audio signal processing with low distortion and wide frequency response.

  3. TL072CP: A popular dual JFET-input operational amplifier known for its low noise and high slew rate,

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MAX261BEWG+ i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of MAX261BEWG+ in technical solutions:

  1. Q: What is the MAX261BEWG+? A: The MAX261BEWG+ is a precision, dual, high-speed, low-noise operational amplifier designed for various applications.

  2. Q: What is the supply voltage range for MAX261BEWG+? A: The supply voltage range for MAX261BEWG+ is typically between ±4V and ±18V.

  3. Q: What is the maximum output current of MAX261BEWG+? A: The maximum output current of MAX261BEWG+ is typically 40mA.

  4. Q: Can I use MAX261BEWG+ in audio applications? A: Yes, MAX261BEWG+ can be used in audio applications due to its low noise and high-speed characteristics.

  5. Q: Is MAX261BEWG+ suitable for low-power applications? A: Yes, MAX261BEWG+ is suitable for low-power applications as it has a low quiescent current consumption.

  6. Q: What is the input offset voltage of MAX261BEWG+? A: The input offset voltage of MAX261BEWG+ is typically 0.5mV.

  7. Q: Can I use MAX261BEWG+ in single-supply applications? A: Yes, MAX261BEWG+ can be used in single-supply applications by connecting the negative supply pin (V-) to ground.

  8. Q: Does MAX261BEWG+ have short-circuit protection? A: Yes, MAX261BEWG+ has built-in short-circuit protection to prevent damage to the device during fault conditions.

  9. Q: What is the bandwidth of MAX261BEWG+? A: The bandwidth of MAX261BEWG+ is typically 10MHz.

  10. Q: Can I use MAX261BEWG+ in high-frequency applications? A: Yes, MAX261BEWG+ can be used in high-frequency applications due to its wide bandwidth and fast slew rate.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.