Micro Commercial Co
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
15KP26A-TP
Se detaljer DataSheets

15KP26A-TP Product Overview

Introduction

The 15KP26A-TP is a high-performance transient voltage suppressor diode designed to protect electronic circuits from voltage transients. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Voltage Transient Suppression
  • Characteristics: High Performance, Fast Response Time
  • Package: DO-201AD
  • Essence: Protection against Voltage Transients
  • Packaging/Quantity: Available in Tape & Reel Packaging, Quantity Varies

Specifications

  • Peak Pulse Power: 1500W
  • Breakdown Voltage: 26V
  • Operating Temperature Range: -55°C to +175°C
  • Reverse Standoff Voltage: 23.2V
  • Forward Voltage: 32.4V at 100A

Detailed Pin Configuration

The 15KP26A-TP features a standard DO-201AD package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time
  • Low clamping voltage
  • High surge capability
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time ensures minimal damage to protected circuits
  • RoHS compliance for environmental sustainability

Disadvantages

  • Relatively high forward voltage compared to some alternative models
  • Limited breakdown voltage may not be suitable for higher voltage applications

Working Principles

The 15KP26A-TP operates by diverting excessive voltage transients away from sensitive electronic components, thereby protecting them from damage. When a transient voltage spike occurs, the diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The 15KP26A-TP is commonly used in various electronic systems requiring protection against voltage transients, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

For applications requiring different specifications or performance characteristics, alternative models to consider include: - 15KP6.8A-TP: Lower breakdown voltage, suitable for lower voltage applications - 15KP36A-TP: Higher breakdown voltage, suitable for higher voltage applications - 15KP26CA-TP: Bi-directional transient voltage suppressor for bidirectional protection

In conclusion, the 15KP26A-TP transient voltage suppressor diode offers effective protection against voltage transients in various electronic applications. Its fast response time, high surge capability, and RoHS compliance make it a reliable choice for circuit protection.

[Word Count: 410]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af 15KP26A-TP i tekniske løsninger

Sure, here are 10 common questions and answers related to the application of 15KP26A-TP in technical solutions:

  1. What is the 15KP26A-TP used for?

    • The 15KP26A-TP is a transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum peak pulse power dissipation of the 15KP26A-TP?

    • The maximum peak pulse power dissipation of the 15KP26A-TP is 15000 watts.

  3. What is the breakdown voltage of the 15KP26A-TP?

    • The breakdown voltage of the 15KP26A-TP is 26 volts.

  4. How does the 15KP26A-TP provide protection against voltage transients?

    • The 15KP26A-TP clamps the transient voltage to a safe level, diverting excess current away from the protected load.

  5. What are the typical applications of the 15KP26A-TP?

    • Typical applications include surge protection in telecommunications equipment, industrial control systems, and power supplies.

  6. What is the response time of the 15KP26A-TP?

    • The response time of the 15KP26A-TP is very fast, typically responding within nanoseconds to transient voltage events.

  7. Can the 15KP26A-TP be used in outdoor applications?

    • Yes, the 15KP26A-TP is suitable for outdoor applications due to its ability to withstand high-energy transients such as lightning strikes.

  8. Does the 15KP26A-TP require any external components for proper operation?

    • No, the 15KP26A-TP is a standalone device and does not require additional external components for proper operation.

  9. What is the operating temperature range of the 15KP26A-TP?

    • The 15KP26A-TP can operate within a temperature range of -55°C to 175°C, making it suitable for a wide range of environments.

  10. Is the 15KP26A-TP RoHS compliant?

    • Yes, the 15KP26A-TP is RoHS compliant, ensuring that it meets environmental standards for hazardous substances.

I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.