Microchip Technology
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MCP2025-500E/P
Se detaljer DataSheets

MCP2025-500E/P

Product Overview

Category

The MCP2025-500E/P belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for communication and control applications in automotive systems.

Characteristics

  • The MCP2025-500E/P is a high-speed CAN transceiver.
  • It operates at a maximum data rate of 1 Mbps.
  • This IC is designed to meet the stringent requirements of the automotive industry.

Package

The MCP2025-500E/P is available in a small outline package (SOP) with 8 pins.

Essence

The essence of the MCP2025-500E/P lies in its ability to provide reliable and efficient communication between different components in automotive systems.

Packaging/Quantity

This IC is typically packaged in reels, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Transmitting Current: 120 mA (maximum)
  • Receiving Current: 20 mA (maximum)
  • Standby Current: 10 µA (maximum)

Detailed Pin Configuration

The MCP2025-500E/P has the following pin configuration:

  1. VDD - Power supply voltage input
  2. GND - Ground reference
  3. TXD - Transmit data input
  4. RXD - Receive data output
  5. VREF - Reference voltage output
  6. RS - Slope control input
  7. CANH - CAN bus positive line
  8. CANL - CAN bus negative line

Functional Features

  • High-speed CAN communication
  • Integrated slope control for improved electromagnetic compatibility (EMC)
  • Low standby current for power efficiency
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • High-speed data transmission capability
  • Robust design for automotive applications
  • Integrated slope control for improved EMC performance
  • Low power consumption in standby mode

Disadvantages

  • Limited to automotive communication and control applications
  • Requires additional external components for complete system integration

Working Principles

The MCP2025-500E/P operates based on the Controller Area Network (CAN) protocol. It facilitates reliable communication between different nodes in an automotive system by transmitting and receiving data over a differential bus.

Detailed Application Field Plans

The MCP2025-500E/P is commonly used in various automotive applications, including:

  1. Engine control units (ECUs)
  2. Transmission control modules
  3. Body control modules
  4. Anti-lock braking systems (ABS)
  5. Airbag control units
  6. Instrument clusters

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MCP2025-500E/P include:

  1. SN65HVD230D
  2. TJA1050
  3. ISO1050
  4. MAX3051
  5. PCA82C251

These alternative models can be considered based on specific application requirements and availability.

In conclusion, the MCP2025-500E/P is a high-speed CAN transceiver designed for automotive communication and control applications. Its robust design, integrated features, and compatibility with the CAN protocol make it a reliable choice for various automotive systems.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MCP2025-500E/P i tekniske løsninger

  1. Question: What is the maximum operating voltage of MCP2025-500E/P?
    Answer: The maximum operating voltage of MCP2025-500E/P is 5.5V.

  2. Question: What is the typical data rate supported by MCP2025-500E/P?
    Answer: The typical data rate supported by MCP2025-500E/P is 500 kbps.

  3. Question: Can MCP2025-500E/P be used in automotive applications?
    Answer: Yes, MCP2025-500E/P is suitable for automotive applications.

  4. Question: What is the recommended operating temperature range for MCP2025-500E/P?
    Answer: The recommended operating temperature range for MCP2025-500E/P is -40°C to 125°C.

  5. Question: Does MCP2025-500E/P support multiple nodes on the bus?
    Answer: Yes, MCP2025-500E/P supports multiple nodes on the bus.

  6. Question: Is MCP2025-500E/P compatible with CAN 2.0B protocol?
    Answer: Yes, MCP2025-500E/P is compatible with CAN 2.0B protocol.

  7. Question: What is the quiescent current consumption of MCP2025-500E/P?
    Answer: The quiescent current consumption of MCP2025-500E/P is typically 10 µA.

  8. Question: Can MCP2025-500E/P be used in industrial control systems?
    Answer: Yes, MCP2025-500E/P is suitable for use in industrial control systems.

  9. Question: What is the maximum number of nodes supported by MCP2025-500E/P on a CAN bus?
    Answer: MCP2025-500E/P can support up to 110 nodes on a CAN bus.

  10. Question: Does MCP2025-500E/P have built-in protection features?
    Answer: Yes, MCP2025-500E/P includes built-in thermal shutdown and short-circuit protection.