The MCP2542WFDT-H/SN belongs to the category of high-speed CAN transceivers.
It is used for connecting a CAN protocol controller to the physical two-wire CAN bus.
The MCP2542WFDT-H/SN comes in an SOIC-8 package.
The essence of this product lies in its ability to facilitate high-speed communication on a CAN bus while providing robust protection against electrostatic discharge.
The MCP2542WFDT-H/SN is typically packaged in reels with a quantity of 2500 units per reel.
The MCP2542WFDT-H/SN features the following pin configuration: 1. VIO (Pin 1) 2. TXD (Pin 2) 3. GND (Pin 3) 4. VCAN (Pin 4) 5. STB (Pin 5) 6. RXD (Pin 6) 7. VDD (Pin 7) 8. VSS (Pin 8)
The MCP2542WFDT-H/SN operates by converting digital signals from the CAN controller into differential signals suitable for transmission over the CAN bus. It also provides protection against ESD events and supports low-power standby mode when not actively transmitting data.
The MCP2542WFDT-H/SN is well-suited for use in various automotive and industrial applications, including but not limited to: - Automotive engine control systems - Industrial automation and control - Vehicle communication networks
Some alternative models to the MCP2542WFDT-H/SN include: - MCP2562FD - TJA1044GT - SN65HVD255DR
In summary, the MCP2542WFDT-H/SN is a high-speed CAN transceiver designed for reliable communication on CAN buses in automotive and industrial applications. Its key features include high-speed operation, low standby current, and enhanced ESD protection, making it a versatile choice for various communication needs.
Word Count: 411
What is the maximum data rate supported by MCP2542WFDT-H/SN?
- The maximum data rate supported by MCP2542WFDT-H/SN is 1 Mbps.
Can MCP2542WFDT-H/SN be used in automotive applications?
- Yes, MCP2542WFDT-H/SN is suitable for automotive applications as it complies with AEC-Q100 standards.
Does MCP2542WFDT-H/SN support wake-up functionality?
- Yes, MCP2542WFDT-H/SN supports wake-up functionality, allowing it to wake up from low-power modes.
What is the operating voltage range of MCP2542WFDT-H/SN?
- The operating voltage range of MCP2542WFDT-H/SN is 4.5V to 5.5V.
Can MCP2542WFDT-H/SN be used in industrial control systems?
- Yes, MCP2542WFDT-H/SN can be used in industrial control systems due to its robustness and reliability.
Is MCP2542WFDT-H/SN compatible with CAN FD protocol?
- Yes, MCP2542WFDT-H/SN is fully compatible with CAN FD protocol, offering enhanced data rates and frame lengths.
What is the typical quiescent current consumption of MCP2542WFDT-H/SN?
- The typical quiescent current consumption of MCP2542WFDT-H/SN is 10 µA.
Can MCP2542WFDT-H/SN operate in extended temperature ranges?
- Yes, MCP2542WFDT-H/SN is designed to operate in extended temperature ranges from -40°C to 125°C.
Does MCP2542WFDT-H/SN have built-in protection features?
- Yes, MCP2542WFDT-H/SN includes built-in protection features such as thermal shutdown and short-circuit protection.
Is MCP2542WFDT-H/SN available in a small form factor package?
- Yes, MCP2542WFDT-H/SN is available in a small 8-pin SOIC package, making it suitable for space-constrained applications.