Microchip Technology
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MCP2561FD-E/P
Se detaljer DataSheets

MCP2561FD-E/P

Product Overview

The MCP2561FD-E/P is a high-speed CAN transceiver designed for automotive and industrial applications. It belongs to the category of integrated circuits and is commonly used in automotive networking systems, industrial automation, and other applications requiring robust communication over a Controller Area Network (CAN) bus. The MCP2561FD-E/P is known for its high-speed operation, low power consumption, and robustness, making it an essential component in modern vehicle and industrial control systems.

Basic Information

  • Category: Integrated Circuit
  • Use: Automotive and Industrial Networking Systems
  • Characteristics: High-speed, Low Power Consumption, Robust
  • Package: 8-pin PDIP/SOIC
  • Essence: High-Speed CAN Transceiver
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

The MCP2561FD-E/P features the following specifications: - High-speed operation up to 8 Mbps - Low standby current consumption of 10 µA - Wide operating voltage range: 4.5V to 5.5V - Compliant with ISO11898-2:2016 standard - ESD protection exceeding ±8 kV HBM

Detailed Pin Configuration

The MCP2561FD-E/P has an 8-pin PDIP/SOIC package with the following pin configuration: 1. VDD 2. VSS 3. STB 4. RXD 5. TXD 6. S 7. CANL 8. CANH

Functional Features

  • High-speed CAN communication
  • Low power consumption in standby mode
  • Enhanced ESD protection
  • Thermal shutdown and transient protection

Advantages and Disadvantages

Advantages

  • High-speed operation enables fast data transfer
  • Low power consumption contributes to energy efficiency
  • Robust design ensures reliable performance in harsh environments

Disadvantages

  • Limited compatibility with older CAN standards
  • Higher cost compared to standard transceivers

Working Principles

The MCP2561FD-E/P operates by interfacing between the microcontroller and the CAN bus. It facilitates the transmission and reception of data packets over the CAN network, providing high-speed communication while maintaining low power consumption. The transceiver's robust design allows it to withstand harsh environmental conditions, making it suitable for automotive and industrial applications.

Detailed Application Field Plans

The MCP2561FD-E/P is widely used in the following application fields: - Automotive networking systems, including in-vehicle communication and diagnostics - Industrial automation and control systems - Telematics and fleet management solutions - Embedded systems requiring reliable CAN communication

Detailed and Complete Alternative Models

Some alternative models to the MCP2561FD-E/P include: - TJA1044GT, another high-speed CAN transceiver with similar characteristics - SN65HVD255, a robust CAN transceiver suitable for automotive and industrial applications - ISO1050DUB, an isolated CAN transceiver offering enhanced noise immunity

In conclusion, the MCP2561FD-E/P is a high-speed CAN transceiver that plays a crucial role in enabling reliable communication within automotive and industrial networks. Its high-speed operation, low power consumption, and robust design make it a preferred choice for modern vehicle and industrial control systems.

Word Count: 489

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MCP2561FD-E/P i tekniske løsninger

  1. What is the maximum data rate supported by MCP2561FD-E/P?
    - The maximum data rate supported by MCP2561FD-E/P is 8 Mbps.

  2. Can MCP2561FD-E/P be used in automotive applications?
    - Yes, MCP2561FD-E/P is suitable for automotive applications as it meets AEC-Q100 requirements.

  3. What is the operating voltage range of MCP2561FD-E/P?
    - The operating voltage range of MCP2561FD-E/P is 4.5V to 5.5V.

  4. Does MCP2561FD-E/P support CAN FD protocol?
    - Yes, MCP2561FD-E/P supports CAN FD (Flexible Data Rate) protocol.

  5. Is MCP2561FD-E/P compatible with 3.3V microcontrollers?
    - Yes, MCP2561FD-E/P is compatible with 3.3V microcontrollers.

  6. What is the typical standby current consumption of MCP2561FD-E/P?
    - The typical standby current consumption of MCP2561FD-E/P is 10 µA.

  7. Can MCP2561FD-E/P operate in harsh industrial environments?
    - Yes, MCP2561FD-E/P is designed to operate in harsh industrial environments with its robust EMC performance.

  8. Does MCP2561FD-E/P have built-in protection features?
    - Yes, MCP2561FD-E/P includes built-in protection features such as thermal shutdown and short-circuit protection.

  9. What is the temperature range for MCP2561FD-E/P?
    - MCP2561FD-E/P has a temperature range of -40°C to 125°C.

  10. Is MCP2561FD-E/P available in a DIP package?
    - No, MCP2561FD-E/P is available in an 8-pin SOIC package.