Microchip Technology
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
PIC16C76-04I/SP
Se detaljer DataSheets

PIC16C76-04I/SP

Product Overview

Category

The PIC16C76-04I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Low power consumption
  • High-performance RISC CPU
  • Wide operating voltage range
  • On-chip program memory
  • Multiple I/O ports
  • Timers and counters
  • Analog-to-digital converter (ADC)
  • Serial communication interface

Package

The PIC16C76-04I/SP is available in a 28-pin plastic dual inline package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for electronic devices.

Packaging/Quantity

The PIC16C76-04I/SP is typically packaged in reels or tubes, with a quantity of 25 units per tube.

Specifications

  • Operating Voltage: 2.0V to 5.5V
  • CPU Speed: 4 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 368 bytes
  • I/O Pins: 22
  • ADC Resolution: 10-bit
  • Communication Interfaces: USART, SPI, I2C

Detailed Pin Configuration

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. OSC1 - Oscillator input
  20. OSC2 - Oscillator output
  21. RC0 - General-purpose I/O pin
  22. RC1 - General-purpose I/O pin
  23. RC2 - General-purpose I/O pin
  24. RC3 - General-purpose I/O pin
  25. RC4 - General-purpose I/O pin
  26. RC5 - General-purpose I/O pin
  27. RC6 - General-purpose I/O pin
  28. RC7 - General-purpose I/O pin

Functional Features

  • High-speed processing capabilities
  • Flexible I/O configuration
  • On-chip memory for program storage
  • Analog-to-digital conversion capability
  • Serial communication interfaces for data transfer
  • Timers and counters for precise timing control

Advantages and Disadvantages

Advantages

  • Low power consumption enables energy-efficient operation
  • Wide operating voltage range allows compatibility with various power sources
  • High-performance RISC CPU ensures efficient execution of instructions
  • Ample program memory size for storing complex algorithms
  • Multiple I/O ports provide flexibility in connecting external devices
  • Integrated analog-to-digital converter simplifies sensor interfacing
  • Serial communication interfaces enable easy data exchange with other devices

Disadvantages

  • Limited RAM size may restrict the complexity of applications
  • Lack of advanced peripherals compared to newer microcontroller models
  • Relatively low CPU speed may limit real-time processing capabilities

Working Principles

The PIC16C76-04I/SP operates based on the principles of a reduced instruction set computer (RISC) architecture. It executes instructions stored in its program memory, interacts with external devices through its I/O ports, and performs calculations using its CPU. The microcontroller can be programmed to perform specific tasks by writing appropriate software code.

Detailed Application Field Plans

The PIC16C76-04I/SP finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Home appliances - Security systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PIC16C76-04I/SP include: - PIC16F877A - PIC18F4520 - ATmega328P - STM32F103C8T6 - MSP430G2553

These alternatives provide comparable features and capabilities, allowing developers to choose the most suitable microcontroller for their specific application requirements.

Word count: 609 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af PIC16C76-04I/SP i tekniske løsninger

  1. What is the operating voltage range of PIC16C76-04I/SP?
    - The operating voltage range of PIC16C76-04I/SP is 2.0V to 5.5V.

  2. What is the maximum frequency at which PIC16C76-04I/SP can operate?
    - PIC16C76-04I/SP can operate at a maximum frequency of 20 MHz.

  3. Does PIC16C76-04I/SP have analog-to-digital conversion (ADC) capability?
    - Yes, PIC16C76-04I/SP has an 8-channel, 10-bit ADC module.

  4. Can PIC16C76-04I/SP be used for controlling motors and actuators?
    - Yes, PIC16C76-04I/SP can be used to control motors and actuators through its GPIO pins and PWM outputs.

  5. What communication interfaces are supported by PIC16C76-04I/SP?
    - PIC16C76-04I/SP supports USART, SPI, and I2C communication interfaces.

  6. Is there a built-in timer module in PIC16C76-04I/SP?
    - Yes, PIC16C76-04I/SP has multiple timer modules including Timer0, Timer1, and Timer2.

  7. Can PIC16C76-04I/SP be programmed using C language?
    - Yes, PIC16C76-04I/SP can be programmed using C language with the appropriate compiler.

  8. What is the maximum number of I/O pins available on PIC16C76-04I/SP?
    - PIC16C76-04I/SP has 33 I/O pins.

  9. Does PIC16C76-04I/SP have any built-in security features?
    - Yes, PIC16C76-04I/SP includes code protection and a programmable code guard feature for security.

  10. What development tools are available for programming PIC16C76-04I/SP?
    - Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC16C76-04I/SP.