Micron Technology Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MT29F256G08AUAAAC5-IT:A

MT29F256G08AUAAAC5-IT:A

Product Overview

Category

MT29F256G08AUAAAC5-IT:A belongs to the category of NAND flash memory.

Use

This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High storage capacity: The MT29F256G08AUAAAC5-IT:A offers a storage capacity of 256 gigabytes (GB), allowing for ample space to store large amounts of data.
  • Fast data transfer rate: With its high-speed interface, this NAND flash memory enables quick read and write operations, ensuring efficient data processing.
  • Reliable performance: The product is designed to provide reliable and consistent performance, ensuring data integrity and durability.
  • Low power consumption: The MT29F256G08AUAAAC5-IT:A is energy-efficient, consuming minimal power during operation, which helps prolong battery life in portable devices.
  • Compact package: This NAND flash memory comes in a compact form factor, making it suitable for integration into small-sized electronic devices.
  • RoHS compliant: The product adheres to the Restriction of Hazardous Substances (RoHS) directive, ensuring environmental friendliness.

Packaging/Quantity

The MT29F256G08AUAAAC5-IT:A is typically packaged in a surface-mount technology (SMT) package. It is available in reel packaging, with each reel containing a specific quantity of units, usually around 1000 pieces.

Specifications

  • Memory Type: NAND Flash
  • Capacity: 256 GB
  • Interface: Universal Flash Storage (UFS)
  • Voltage Supply: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TSOP (Thin Small Outline Package)
  • Pin Count: 48

Detailed Pin Configuration

The MT29F256G08AUAAAC5-IT:A has a total of 48 pins. The pin configuration is as follows:

  1. VCC
  2. VCCQ
  3. GND
  4. RE# (Read Enable)
  5. WE# (Write Enable)
  6. CLE (Command Latch Enable)
  7. ALE (Address Latch Enable)
  8. CE# (Chip Enable)
  9. R/B# (Ready/Busy)
  10. DQS (Data Strobe)
  11. DQ0-DQ7 (Data Input/Output)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. NC (No Connection)
  17. NC (No Connection)
  18. NC (No Connection)
  19. NC (No Connection)
  20. NC (No Connection)
  21. NC (No Connection)
  22. NC (No Connection)
  23. NC (No Connection)
  24. NC (No Connection)
  25. NC (No Connection)
  26. NC (No Connection)
  27. NC (No Connection)
  28. NC (No Connection)
  29. NC (No Connection)
  30. NC (No Connection)
  31. NC (No Connection)
  32. NC (No Connection)
  33. NC (No Connection)
  34. NC (No Connection)
  35. NC (No Connection)
  36. NC (No Connection)
  37. NC (No Connection)
  38. NC (No Connection)
  39. NC (No Connection)
  40. NC (No Connection)
  41. NC (No Connection)
  42. NC (No Connection)
  43. NC (No Connection)
  44. NC (No Connection)
  45. NC (No Connection)
  46. NC (No Connection)
  47. NC (No Connection)
  48. NC (No Connection)

Functional Features

  • High-speed data transfer: The MT29F256G08AUAAAC5-IT:A offers fast read and write speeds, allowing for efficient data processing.
  • Error correction: This NAND flash memory incorporates error correction techniques to ensure data integrity and minimize the risk of data loss or corruption.
  • Wear leveling: The product employs wear leveling algorithms to distribute data evenly across memory cells, extending the lifespan of the device.
  • Bad block management: It includes mechanisms to identify and manage bad blocks, ensuring reliable operation even in the presence of defective memory cells.
  • Power-saving modes: The MT29F256G08AUAAAC5-IT:A supports various power-saving modes, reducing energy consumption during idle periods.

Advantages and Disadvantages

Advantages

  • Large storage capacity
  • Fast data transfer rate
  • Reliable performance
  • Low power consumption
  • Compact form factor
  • RoHS compliant

Disadvantages

  • Relatively high cost compared to lower-capacity NAND flash memory options
  • Limited compatibility with older devices that do not support

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MT29F256G08AUAAAC5-IT:A i tekniske løsninger

  1. Question: What is the capacity of the MT29F256G08AUAAAC5-IT:A memory chip?
    Answer: The MT29F256G08AUAAAC5-IT:A has a capacity of 256 gigabits (32 gigabytes).

  2. Question: What is the interface type supported by the MT29F256G08AUAAAC5-IT:A?
    Answer: The MT29F256G08AUAAAC5-IT:A supports the NAND Flash interface.

  3. Question: What is the operating voltage range for the MT29F256G08AUAAAC5-IT:A?
    Answer: The MT29F256G08AUAAAC5-IT:A operates at a voltage range of 2.7V to 3.6V.

  4. Question: What is the maximum data transfer rate of the MT29F256G08AUAAAC5-IT:A?
    Answer: The MT29F256G08AUAAAC5-IT:A has a maximum data transfer rate of up to 200 megabytes per second.

  5. Question: Does the MT29F256G08AUAAAC5-IT:A support hardware encryption?
    Answer: No, the MT29F256G08AUAAAC5-IT:A does not have built-in hardware encryption capabilities.

  6. Question: Can the MT29F256G08AUAAAC5-IT:A be used in automotive applications?
    Answer: Yes, the MT29F256G08AUAAAC5-IT:A is suitable for use in automotive environments.

  7. Question: What is the temperature range within which the MT29F256G08AUAAAC5-IT:A can operate?
    Answer: The MT29F256G08AUAAAC5-IT:A can operate within a temperature range of -40°C to +85°C.

  8. Question: Does the MT29F256G08AUAAAC5-IT:A support error correction codes (ECC)?
    Answer: Yes, the MT29F256G08AUAAAC5-IT:A supports hardware-based ECC for data integrity.

  9. Question: Can the MT29F256G08AUAAAC5-IT:A be used in industrial control systems?
    Answer: Yes, the MT29F256G08AUAAAC5-IT:A is suitable for use in industrial control systems.

  10. Question: What is the package type of the MT29F256G08AUAAAC5-IT:A?
    Answer: The MT29F256G08AUAAAC5-IT:A comes in a 48-ball VFBGA package.