Microsemi Corporation
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
APTGLQ25H120T2G
Se detaljer DataSheets

APTGLQ25H120T2G Encyclopedia Entry

Product Overview

The APTGLQ25H120T2G belongs to the category of power semiconductor devices and is specifically designed for high-power applications. This product is commonly used in industrial and commercial electronic systems due to its high efficiency and reliability. The APTGLQ25H120T2G is characterized by its high voltage and current ratings, making it suitable for demanding power management tasks. It is typically packaged in a robust and heat-dissipating housing, ensuring optimal performance and longevity. The essence of this product lies in its ability to handle substantial power loads while maintaining stability and efficiency. The packaging typically includes a single unit, and the quantity may vary based on the manufacturer's specifications.

Specifications

  • Voltage Rating: 1200V
  • Current Rating: 25A
  • Package Type: TO-247
  • Thermal Resistance: 0.35°C/W
  • Switching Frequency: Up to 20kHz
  • Operating Temperature Range: -40°C to 150°C

Detailed Pin Configuration

The APTGLQ25H120T2G features a standard TO-247 pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage and current handling capabilities
  • Low thermal resistance for efficient heat dissipation
  • Fast switching speed for improved power management
  • Robust construction for reliable operation in harsh environments

Advantages and Disadvantages

Advantages

  • High power handling capacity
  • Efficient heat dissipation
  • Fast switching speed
  • Reliable performance in demanding conditions

Disadvantages

  • Higher cost compared to lower-rated devices
  • Requires careful thermal management in high-power applications

Working Principles

The APTGLQ25H120T2G operates based on the principles of power electronics, utilizing its high voltage and current ratings to control and manage power flow within electronic systems. By modulating the gate signal, the device can efficiently switch power on and off, enabling precise power management and control.

Detailed Application Field Plans

The APTGLQ25H120T2G finds extensive use in various applications, including: - Industrial motor drives - Uninterruptible power supplies (UPS) - Renewable energy systems - Electric vehicle powertrains - High-power inverters

Detailed and Complete Alternative Models

  1. APTGLQ30H120T2G

    • Voltage Rating: 1200V
    • Current Rating: 30A
    • Package Type: TO-247
    • Thermal Resistance: 0.3°C/W
    • Switching Frequency: Up to 25kHz
    • Operating Temperature Range: -40°C to 150°C

  2. APTGLQ20H120T2G

    • Voltage Rating: 1200V
    • Current Rating: 20A
    • Package Type: TO-247
    • Thermal Resistance: 0.4°C/W
    • Switching Frequency: Up to 18kHz
    • Operating Temperature Range: -40°C to 150°C

In conclusion, the APTGLQ25H120T2G is a high-performance power semiconductor device that offers exceptional power handling capabilities and reliability. Its application spans across diverse industries, making it an essential component in modern power electronic systems.

[Word Count: 498]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af APTGLQ25H120T2G i tekniske løsninger

Sure, here are 10 common questions and answers related to the application of APTGLQ25H120T2G in technical solutions:

  1. What is APTGLQ25H120T2G?

    • APTGLQ25H120T2G is a specific model of power semiconductor device, typically used for high-power applications such as motor control, power supplies, and renewable energy systems.

  2. What is the maximum voltage and current rating of APTGLQ25H120T2G?

    • The maximum voltage and current rating of APTGLQ25H120T2G is 1200V and 25A, respectively.

  3. What are the typical applications of APTGLQ25H120T2G?

    • APTGLQ25H120T2G is commonly used in applications such as motor drives, inverters, welding equipment, and industrial power systems.

  4. What are the key features of APTGLQ25H120T2G?

    • Some key features of APTGLQ25H120T2G include low on-state voltage, fast switching speed, and high ruggedness.

  5. What are the thermal considerations for APTGLQ25H120T2G?

    • Proper heat sinking and thermal management are important for ensuring the reliable operation of APTGLQ25H120T2G in high-power applications.

  6. Is APTGLQ25H120T2G suitable for use in automotive applications?

    • Yes, APTGLQ25H120T2G is suitable for use in automotive applications such as electric vehicle powertrains and charging systems.

  7. What are the recommended gate drive requirements for APTGLQ25H120T2G?

    • APTGLQ25H120T2G typically requires a gate driver with sufficient drive strength and voltage capability to ensure proper turn-on and turn-off performance.

  8. Can APTGLQ25H120T2G be used in parallel configurations for higher current applications?

    • Yes, APTGLQ25H120T2G can be used in parallel configurations to achieve higher current handling capabilities, but careful attention must be paid to current sharing and thermal management.

  9. What are the protection features available in APTGLQ25H120T2G?

    • APTGLQ25H120T2G may include protection features such as overcurrent protection, overtemperature protection, and short-circuit protection to enhance system reliability.

  10. Where can I find detailed application notes and reference designs for APTGLQ25H120T2G?

    • Detailed application notes and reference designs for APTGLQ25H120T2G can typically be found on the manufacturer's website or through their technical support resources.