Microsemi Corporation
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
JANTX1N4116-1
Se detaljer DataSheets

JANTX1N4116-1

Product Overview

Category

The JANTX1N4116-1 belongs to the category of semiconductor devices, specifically a diode.

Use

It is commonly used in electronic circuits for rectification and signal demodulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High temperature operation capability

Package

The JANTX1N4116-1 is typically available in a DO-35 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in electronic circuits.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Reverse Voltage: 75V
  • Forward Current: 150mA
  • Forward Voltage Drop: 1V at 10mA
  • Reverse Recovery Time: 4ns

Detailed Pin Configuration

The JANTX1N4116-1 diode has two pins, anode, and cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Fast response time
  • Low power dissipation

Advantages

  • High reliability and durability
  • Low forward voltage drop
  • Suitable for high-temperature environments

Disadvantages

  • Limited maximum reverse voltage
  • Relatively low forward current rating

Working Principles

The JANTX1N4116-1 operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction. When forward biased, it allows current to pass through with minimal voltage drop, enabling efficient rectification.

Detailed Application Field Plans

The JANTX1N4116-1 is widely used in: - Power supply units - Signal demodulation circuits - Voltage clamping applications - Overvoltage protection circuits

Detailed and Complete Alternative Models

  • 1N4148: Similar fast switching diode with higher maximum reverse voltage
  • 1N4001: General-purpose rectifier diode with higher forward current rating
  • 1N5819: Schottky diode with lower forward voltage drop

In conclusion, the JANTX1N4116-1 diode is a reliable and efficient component for electronic circuits requiring rectification and signal demodulation. Its high reliability, low forward voltage drop, and fast switching speed make it suitable for various applications, despite its limitations in maximum reverse voltage and forward current rating. Additionally, there are alternative models available that offer different performance characteristics to suit specific design requirements.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af JANTX1N4116-1 i tekniske løsninger

Sure, here are 10 common questions and answers related to the application of JANTX1N4116-1:

  1. What is JANTX1N4116-1?

    • JANTX1N4116-1 is a high-reliability, military-grade silicon power rectifier diode.

  2. What are the key features of JANTX1N4116-1?

    • The key features include high surge current capability, low forward voltage drop, and high reliability.

  3. What are the typical applications of JANTX1N4116-1?

    • It is commonly used in military and aerospace applications, as well as in other high-reliability technical solutions where ruggedness and reliability are critical.

  4. What is the maximum forward voltage of JANTX1N4116-1?

    • The maximum forward voltage is typically around 1.1 volts at a forward current of 3 amperes.

  5. What is the maximum reverse voltage of JANTX1N4116-1?

    • The maximum reverse voltage is 200 volts.

  6. What is the operating temperature range of JANTX1N4116-1?

    • The operating temperature range is typically -65°C to +175°C.

  7. Is JANTX1N4116-1 suitable for high-frequency applications?

    • No, it is not recommended for high-frequency applications due to its relatively slow recovery time.

  8. Can JANTX1N4116-1 be used in automotive applications?

    • While it is a rugged diode, it may not meet the specific requirements for automotive applications. Automotive-grade diodes are recommended for such applications.

  9. Does JANTX1N4116-1 require heatsinking?

    • Heatsinking may be required depending on the application and the power dissipation involved. Consult the datasheet for specific guidance.

  10. Where can I find more detailed information about the application of JANTX1N4116-1?

    • Detailed information can be found in the product datasheet provided by the manufacturer or through technical support from authorized distributors.