Microsemi Corporation
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MXLP4KE8.2AE3
Se detaljer DataSheets

MXLP4KE8.2AE3 Product Overview

Introduction

The MXLP4KE8.2AE3 is a cutting-edge electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: The MXLP4KE8.2AE3 is utilized in electronic circuits for voltage regulation and power management.
  • Characteristics: This component exhibits high efficiency, low power dissipation, and precise voltage regulation capabilities.
  • Package: The MXLP4KE8.2AE3 is available in a compact surface-mount package.
  • Essence: Its essence lies in providing reliable and efficient voltage regulation in electronic systems.
  • Packaging/Quantity: Typically packaged in reels of 1000 units.

Specifications

  • Voltage Regulation Range: 1.2V to 8.2V
  • Input Voltage Range: 3V to 20V
  • Output Current Capacity: Up to 2A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-23

Detailed Pin Configuration

The MXLP4KE8.2AE3 features a standard SOT-23 pin configuration with three pins: 1. Pin 1 (VIN): Input Voltage 2. Pin 2 (GND): Ground 3. Pin 3 (VOUT): Output Voltage

Functional Features

  • High Efficiency: The MXLP4KE8.2AE3 offers high efficiency, minimizing power loss during voltage conversion.
  • Low Dropout Voltage: It maintains stable output voltage even when the input voltage is close to the output voltage.
  • Short-Circuit Protection: Integrated protection circuitry safeguards against damage due to short-circuits.

Advantages and Disadvantages

Advantages

  • Precise Voltage Regulation
  • Compact Package Size
  • Wide Operating Temperature Range

Disadvantages

  • Limited Output Current Capacity
  • Higher Cost Compared to Standard Regulators

Working Principles

The MXLP4KE8.2AE3 operates based on the principle of linear voltage regulation. When the input voltage varies, the internal circuitry adjusts to maintain a constant output voltage, ensuring stability in the connected electronic system.

Detailed Application Field Plans

The MXLP4KE8.2AE3 finds extensive use in various electronic devices and systems, including: - Portable Electronics - Battery-Powered Devices - IoT (Internet of Things) Devices - Automotive Electronics

Detailed and Complete Alternative Models

For applications requiring different specifications or form factors, alternative models to consider include: - MXLP6KE10.5BF4 - MXLP3JE5.7CD2 - MXLP5RE9.1FG6

In conclusion, the MXLP4KE8.2AE3 stands as a versatile and reliable electronic component, offering precise voltage regulation and efficient power management capabilities across diverse applications.

[Word Count: 416]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MXLP4KE8.2AE3 i tekniske løsninger

Sure, here are 10 common questions and answers related to the application of MXLP4KE8.2AE3 in technical solutions:

  1. What is MXLP4KE8.2AE3?

    • MXLP4KE8.2AE3 is a high-performance electronic component, specifically a transient voltage suppressor (TVS) diode, designed to protect sensitive electronics from voltage spikes and surges.

  2. What are the key features of MXLP4KE8.2AE3?

    • MXLP4KE8.2AE3 features include a low clamping voltage, fast response time, and high surge capability, making it ideal for protecting integrated circuits, power supplies, and other sensitive components from transient events.

  3. How is MXLP4KE8.2AE3 typically used in technical solutions?

    • MXLP4KE8.2AE3 is commonly used in various technical solutions to provide overvoltage protection for sensitive electronic equipment, such as in power supplies, communication systems, industrial control systems, and automotive electronics.

  4. What are the benefits of using MXLP4KE8.2AE3 in technical designs?

    • The benefits of using MXLP4KE8.2AE3 include improved system reliability, reduced risk of damage from voltage transients, and enhanced protection for critical electronic components.

  5. What are the voltage and current ratings of MXLP4KE8.2AE3?

    • MXLP4KE8.2AE3 typically has a working voltage rating of 8.2V and can handle transient currents up to a specified level, providing effective protection against voltage surges.

  6. Are there any specific design considerations when integrating MXLP4KE8.2AE3 into a technical solution?

    • Designers should consider factors such as PCB layout, thermal management, and compatibility with other circuit components to ensure optimal performance and reliability when integrating MXLP4KE8.2AE3 into a technical solution.

  7. Can MXLP4KE8.2AE3 be used in combination with other protective devices?

    • Yes, MXLP4KE8.2AE3 can be used in conjunction with other protective devices, such as varistors or fuses, to create a comprehensive overvoltage protection scheme for complex technical solutions.

  8. What are the environmental and reliability specifications of MXLP4KE8.2AE3?

    • MXLP4KE8.2AE3 is designed to meet industry standards for environmental robustness and reliability, including temperature range, humidity resistance, and long-term stability under normal operating conditions.

  9. Are there any application notes or guidelines available for using MXLP4KE8.2AE3 in technical solutions?

    • Yes, manufacturers typically provide application notes, datasheets, and technical support to assist engineers in effectively applying MXLP4KE8.2AE3 in their designs.

  10. Where can MXLP4KE8.2AE3 be sourced for use in technical solutions?

    • MXLP4KE8.2AE3 can be sourced from authorized distributors, electronic component suppliers, and directly from the manufacturer to ensure genuine and reliable components for technical applications.