Monolithic Power Systems Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MP62171EK-LF-Z
Se detaljer DataSheets

MP62171EK-LF-Z

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency voltage regulator
    • Low power consumption
    • Wide input voltage range
    • Small package size
  • Package: LF-Z Package
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 2A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP62171EK-LF-Z has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. SW: Switching Node

Functional Features

  • High efficiency voltage regulation for various applications
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft start for smooth power-up
  • Adjustable output voltage through external resistors

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation - Wide input voltage range allows for versatile use - Small package size saves board space - Overcurrent and thermal protection ensure device safety - Soft start feature prevents inrush current

Disadvantages: - Limited maximum output current of 2A - Requires external resistors for adjustable output voltage

Working Principles

The MP62171EK-LF-Z is a voltage regulator IC that converts an input voltage within the range of 4.5V to 28V to a regulated output voltage between 0.8V and 5.5V. It utilizes a switching regulator topology to achieve high efficiency. The IC incorporates various protection features such as overcurrent and thermal shutdown to ensure safe operation. The soft start feature gradually ramps up the output voltage during power-up, preventing excessive inrush current.

Detailed Application Field Plans

The MP62171EK-LF-Z is suitable for a wide range of applications, including but not limited to:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. Battery-powered devices
  4. Telecommunications equipment
  5. Home appliances
  6. LED lighting systems

Detailed and Complete Alternative Models

  1. MP62172EK-LF-Z: Similar specifications with higher maximum output current of 3A.
  2. MP62173EK-LF-Z: Similar specifications with adjustable output voltage through an integrated digital interface.
  3. MP62174EK-LF-Z: Similar specifications with wider input voltage range of 4.5V to 36V.

These alternative models provide options based on specific requirements and can be considered as alternatives to the MP62171EK-LF-Z.

Word count: 315 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MP62171EK-LF-Z i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of MP62171EK-LF-Z in technical solutions:

  1. Q: What is MP62171EK-LF-Z? A: MP62171EK-LF-Z is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of MP62171EK-LF-Z? A: Some key features of MP62171EK-LF-Z include high efficiency, low quiescent current, wide input voltage range, and multiple output channels.

  3. Q: What technical solutions can MP62171EK-LF-Z be used in? A: MP62171EK-LF-Z can be used in a wide range of applications such as industrial automation, consumer electronics, automotive systems, and IoT devices.

  4. Q: How many output channels does MP62171EK-LF-Z have? A: MP62171EK-LF-Z has multiple output channels, typically ranging from two to four, depending on the specific variant.

  5. Q: What is the input voltage range supported by MP62171EK-LF-Z? A: MP62171EK-LF-Z supports a wide input voltage range, typically from 2.7V to 5.5V, making it suitable for various power supply configurations.

  6. Q: Can MP62171EK-LF-Z handle high current loads? A: Yes, MP62171EK-LF-Z is designed to handle high current loads, with each output channel capable of delivering several hundred milliamps or more.

  7. Q: Does MP62171EK-LF-Z have built-in protection features? A: Yes, MP62171EK-LF-Z incorporates various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  8. Q: Is MP62171EK-LF-Z programmable or configurable? A: No, MP62171EK-LF-Z is not programmable or configurable. It operates based on its fixed specifications and does not require external programming.

  9. Q: What is the typical efficiency of MP62171EK-LF-Z? A: MP62171EK-LF-Z has a high typical efficiency, often exceeding 90%, which helps to minimize power losses and maximize battery life.

  10. Q: Where can I find more information about MP62171EK-LF-Z? A: You can find more detailed information about MP62171EK-LF-Z in the datasheet provided by the manufacturer or on their official website.