Nexperia USA Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
74HC163D,652
Se detaljer DataSheets

74HC163D,652

Product Overview

Category

The 74HC163D,652 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for various applications such as counters, frequency dividers, and time delay circuits.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger action on all inputs
  • Direct reset capability
  • Buffered clock and direct clear inputs
  • Fully static operation

Package

The 74HC163D,652 is available in a small outline package (SO) with 16 pins.

Essence

The essence of this product lies in its ability to perform reliable and efficient counting operations in digital circuits.

Packaging/Quantity

The 74HC163D,652 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: 2V to 6V
  • Input voltage: -0.5V to VCC + 0.5V
  • Output voltage: 0V to VCC
  • Operating temperature range: -40°C to +125°C
  • Maximum clock frequency: 80MHz

Detailed Pin Configuration

  1. Clock Enable (CE)
  2. Clock (CLK)
  3. Parallel Load (PL)
  4. Master Reset (MR)
  5. Serial Data (SER)
  6. Q0 Output
  7. Q1 Output
  8. Q2 Output
  9. Q3 Output
  10. Carry Out (CO)
  11. Down/Up (D/U)
  12. Down/Up (D/U)
  13. Down/Up (D/U)
  14. Down/Up (D/U)
  15. GND (Ground)
  16. VCC (Supply Voltage)

Functional Features

  • Synchronous operation
  • 4-bit binary counter
  • Asynchronous reset
  • Parallel load capability
  • Carry output for cascading multiple counters

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient counting in digital circuits.
  • Low power consumption makes it suitable for battery-powered applications.
  • Wide operating voltage range provides flexibility in various electronic systems.
  • Schmitt-trigger action on all inputs ensures reliable signal processing.
  • Direct reset capability simplifies circuit design.

Disadvantages

  • Limited number of bits (4-bit) restricts the range of counting possibilities.
  • Lack of built-in error detection or correction mechanisms.

Working Principles

The 74HC163D,652 operates as a synchronous 4-bit binary counter. It counts up or down based on the input signals provided to the Down/Up (D/U) pins. The clock signal controls the counting operation, while the Clock Enable (CE) pin enables or disables the clock input. The Parallel Load (PL) pin allows the user to load a specific count value into the counter. The Master Reset (MR) pin asynchronously resets the counter to its initial state.

Detailed Application Field Plans

The 74HC163D,652 finds applications in various fields, including:

  1. Digital frequency dividers
  2. Time delay circuits
  3. Industrial automation systems
  4. Communication equipment
  5. Automotive electronics
  6. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for the 74HC163D,652 are:

  1. CD40163BE
  2. SN74LS163AN
  3. MC74HC163N
  4. HEF40163BP

These alternatives offer similar functionality and can be used interchangeably depending on the specific requirements of the application.

In conclusion, the 74HC163D,652 is a versatile 4-bit binary counter IC with various applications in digital electronics. Its high-speed operation, low power consumption, and wide operating voltage range make it a popular choice among designers. However, its limited bit count and lack of error detection/correction features should be considered when selecting this IC for specific applications.

Word Count: 531

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af 74HC163D,652 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of 74HC163D,652 in technical solutions:

  1. Q: What is the 74HC163D,652? A: The 74HC163D,652 is a synchronous presettable binary counter IC (integrated circuit) that can be used in various digital applications.

  2. Q: What is the maximum clock frequency supported by the 74HC163D,652? A: The 74HC163D,652 can support clock frequencies up to 50 MHz.

  3. Q: How many bits does the 74HC163D,652 have? A: The 74HC163D,652 is a 4-bit counter, meaning it can count from 0 to 15.

  4. Q: Can the 74HC163D,652 be cascaded to create larger counters? A: Yes, multiple 74HC163D,652 ICs can be cascaded together to create larger counters with more bits.

  5. Q: What is the purpose of the preset inputs on the 74HC163D,652? A: The preset inputs allow you to set an initial value for the counter, which can be useful in certain applications.

  6. Q: How do I reset the counter to its initial state using the 74HC163D,652? A: The 74HC163D,652 has a synchronous reset input that can be used to reset the counter to its initial state.

  7. Q: Can the 74HC163D,652 be used as a frequency divider? A: Yes, the 74HC163D,652 can be used as a frequency divider by connecting the output of the counter to the clock input of another device.

  8. Q: What is the power supply voltage range for the 74HC163D,652? A: The 74HC163D,652 operates with a power supply voltage range of 2V to 6V.

  9. Q: Does the 74HC163D,652 have any built-in error detection or correction features? A: No, the 74HC163D,652 does not have any built-in error detection or correction features.

  10. Q: Can the 74HC163D,652 be used in both synchronous and asynchronous applications? A: No, the 74HC163D,652 is specifically designed for synchronous applications where all inputs are synchronized to the clock signal.

Please note that these answers are general and may vary depending on specific application requirements and circuit design considerations.