Nuvoton Technology Corporation of America
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
W78L054A24PL
Se detaljer DataSheets

W78L054A24PL

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: Low-power, 8-bit, 8051-compatible
  • Package: PLCC-44 (Plastic Leaded Chip Carrier)
  • Essence: A microcontroller designed for low-power applications
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 12 MHz
  • Program Memory: 4 KB Flash
  • Data Memory: 256 bytes RAM
  • I/O Pins: 32
  • Timers/Counters: 2 x 16-bit
  • Serial Communication: UART, SPI, I2C
  • Operating Voltage: 2.7V - 5.5V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The W78L054A24PL has a total of 44 pins. The pin configuration is as follows:

  1. VSS - Ground
  2. P0.0 - Port 0, Bit 0
  3. P0.1 - Port 0, Bit 1
  4. P0.2 - Port 0, Bit 2
  5. P0.3 - Port 0, Bit 3
  6. P0.4 - Port 0, Bit 4
  7. P0.5 - Port 0, Bit 5
  8. P0.6 - Port 0, Bit 6
  9. P0.7 - Port 0, Bit 7
  10. RST - Reset
  11. P1.0 - Port 1, Bit 0
  12. P1.1 - Port 1, Bit 1
  13. P1.2 - Port 1, Bit 2
  14. P1.3 - Port 1, Bit 3
  15. P1.4 - Port 1, Bit 4
  16. P1.5 - Port 1, Bit 5
  17. P1.6 - Port 1, Bit 6
  18. P1.7 - Port 1, Bit 7
  19. XTAL1 - Crystal Oscillator Input
  20. XTAL2 - Crystal Oscillator Output
  21. EA/VPP - External Access Enable / Programming Voltage
  22. ALE/PROG - Address Latch Enable / Program Pulse
  23. PSEN - Program Store Enable
  24. P2.0 - Port 2, Bit 0
  25. P2.1 - Port 2, Bit 1
  26. P2.2 - Port 2, Bit 2
  27. P2.3 - Port 2, Bit 3
  28. P2.4 - Port 2, Bit 4
  29. P2.5 - Port 2, Bit 5
  30. P2.6 - Port 2, Bit 6
  31. P2.7 - Port 2, Bit 7
  32. VCC - Power Supply

Functional Features

  • Low-power consumption for battery-operated devices
  • 8051-compatible architecture allows easy migration from existing designs
  • Wide operating voltage range enables flexibility in power supply options
  • Multiple serial communication interfaces (UART, SPI, I2C) for versatile connectivity
  • Two 16-bit timers/counters for precise timing applications
  • Ample program and data memory for various application requirements

Advantages and Disadvantages

Advantages: - Low-power design suitable for battery-powered devices - Compatibility with existing 8051-based designs simplifies migration - Versatile serial communication interfaces enhance connectivity options - Sufficient program and data memory for most applications

Disadvantages: - Limited processing power compared to more advanced microcontrollers - Relatively small memory capacity may restrict complex application development

Working Principles

The W78L054A24PL is based on the 8051 architecture, which utilizes an 8-bit CPU. It operates by executing instructions stored in its internal Flash memory. The microcontroller communicates with external devices through its I/O pins and supports various serial communication protocols such as UART, SPI, and I2C. The timers/counters enable precise timing control, while the low-power design ensures efficient operation in battery-powered applications.

Detailed Application Field Plans

The W78L054A24PL is well-suited for a wide range of low-power applications, including but not limited to:

  1. Battery-powered devices: Portable electronics, remote controls, wireless sensors
  2. Home automation: Smart lighting systems, temperature control units
  3. Industrial control: Monitoring and control systems

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af W78L054A24PL i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of W78L054A24PL in technical solutions:

  1. Q: What is the W78L054A24PL microcontroller used for? A: The W78L054A24PL is a microcontroller commonly used in various technical solutions, such as embedded systems, automation, and control applications.

  2. Q: What is the operating voltage range of the W78L054A24PL? A: The W78L054A24PL operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the W78L054A24PL have? A: The W78L054A24PL has 4KB of flash memory for program storage.

  4. Q: Can I use the W78L054A24PL for analog signal processing? A: No, the W78L054A24PL is primarily a digital microcontroller and does not have built-in analog-to-digital converters or dedicated analog processing capabilities.

  5. Q: What is the maximum clock frequency supported by the W78L054A24PL? A: The W78L054A24PL can operate at a maximum clock frequency of 12MHz.

  6. Q: Does the W78L054A24PL support interrupts? A: Yes, the W78L054A24PL supports both external and internal interrupts, allowing for efficient event-driven programming.

  7. Q: Can I interface the W78L054A24PL with other devices using serial communication protocols? A: Yes, the W78L054A24PL has built-in UART (Universal Asynchronous Receiver-Transmitter) modules that enable serial communication with other devices.

  8. Q: What type of package does the W78L054A24PL come in? A: The W78L054A24PL is available in a 40-pin DIP (Dual Inline Package) format, which is commonly used for through-hole mounting.

  9. Q: Is the W78L054A24PL suitable for low-power applications? A: Yes, the W78L054A24PL has power-saving features such as multiple sleep modes and low-power consumption, making it suitable for battery-powered or energy-efficient designs.

  10. Q: Are there any development tools or software available for programming the W78L054A24PL? A: Yes, several development tools and integrated development environments (IDEs) support programming the W78L054A24PL, including popular options like Keil MDK and SDCC (Small Device C Compiler).

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.