Category: Integrated Circuit (IC)
Use: The 74ALVT16652DGG,118 is a high-performance, low-voltage, 16-bit universal bus transceiver with 3-state outputs. It is designed for asynchronous communication between data buses.
Characteristics: - High-speed operation - Low power consumption - Wide voltage range compatibility - 3-state outputs for bus sharing - ESD protection for robustness
Package: The 74ALVT16652DGG,118 is available in a TSSOP package, which stands for Thin Shrink Small Outline Package. This package offers a compact size and good thermal performance.
Essence: The essence of the 74ALVT16652DGG,118 lies in its ability to facilitate bidirectional data transfer between two independent buses while providing isolation when necessary.
Packaging/Quantity: The 74ALVT16652DGG,118 is typically sold in reels or tubes containing multiple units. The exact quantity may vary depending on the supplier.
The 74ALVT16652DGG,118 has a total of 56 pins, which are divided into various functional groups:
Please refer to the datasheet for a detailed pinout diagram.
The 74ALVT16652DGG,118 offers the following functional features:
Advantages: - Enables bidirectional data transfer between two buses - Supports bus sharing with 3-state outputs - High-speed operation for fast data transfer - Wide voltage range compatibility - Low power consumption - Robustness against electrostatic discharge
Disadvantages: - Limited to 16-bit data bus width - Requires careful consideration of voltage levels and compatibility
The 74ALVT16652DGG,118 operates based on the principles of digital logic. It utilizes internal circuitry to control the bidirectional flow of data between two buses. When enabled, the IC allows data to pass through from one bus to another. The 3-state outputs provide isolation when necessary, preventing conflicts between multiple devices connected to the same bus.
The 74ALVT16652DGG,118 finds applications in various fields where bidirectional data transfer and bus sharing are required. Some potential application areas include:
Sure! Here are 10 common questions and answers related to the application of 74ALVT16652DGG,118 in technical solutions:
Q: What is the function of the 74ALVT16652DGG,118? A: The 74ALVT16652DGG,118 is a 16-bit registered transceiver with 3-state outputs. It can be used for bidirectional data transfer between two buses.
Q: What is the voltage range supported by the 74ALVT16652DGG,118? A: The 74ALVT16652DGG,118 supports a voltage range of 1.65V to 3.6V.
Q: How many data inputs and outputs does the 74ALVT16652DGG,118 have? A: The 74ALVT16652DGG,118 has 16 data inputs and 16 data outputs.
Q: Can the 74ALVT16652DGG,118 be used in both synchronous and asynchronous applications? A: Yes, the 74ALVT16652DGG,118 can be used in both synchronous and asynchronous applications.
Q: What is the maximum operating frequency of the 74ALVT16652DGG,118? A: The maximum operating frequency of the 74ALVT16652DGG,118 is typically around 200MHz.
Q: Does the 74ALVT16652DGG,118 support hot insertion? A: Yes, the 74ALVT16652DGG,118 supports hot insertion, which means it can be inserted or removed from a live circuit without causing damage.
Q: Can the 74ALVT16652DGG,118 handle bus contention? A: Yes, the 74ALVT16652DGG,118 has built-in bus hold circuitry that prevents bus contention when the outputs are in the high-impedance state.
Q: What is the power supply voltage required for the 74ALVT16652DGG,118? A: The 74ALVT16652DGG,118 requires a power supply voltage of 2.3V to 3.6V.
Q: Does the 74ALVT16652DGG,118 have any built-in ESD protection? A: Yes, the 74ALVT16652DGG,118 has built-in ESD protection on all inputs and outputs.
Q: Can the 74ALVT16652DGG,118 be used in automotive applications? A: Yes, the 74ALVT16652DGG,118 is qualified for automotive applications and meets the necessary standards.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.