NXP USA Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
PCA9543AD,118
Se detaljer DataSheets

PCA9543AD,118

Product Overview

  • Category: Integrated Circuit
  • Use: I2C Multiplexer
  • Characteristics: Low-voltage, 2-channel, bidirectional switch for I2C and SMBus applications
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Enables multiple I2C devices to share a single I2C bus
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2
  • I2C Bus Compatibility: Standard-mode, Fast-mode, Fast-mode Plus, and High-speed mode
  • Maximum Frequency: 400kHz
  • Standby Current: 10µA (typical)

Detailed Pin Configuration

The PCA9543AD,118 has a total of 20 pins. The pin configuration is as follows:

  1. SDA0: Channel 0 Serial Data Line
  2. SCL0: Channel 0 Serial Clock Line
  3. EN0: Channel 0 Enable Input
  4. SDA1: Channel 1 Serial Data Line
  5. SCL1: Channel 1 Serial Clock Line
  6. EN1: Channel 1 Enable Input
  7. GND: Ground
  8. VCC: Supply Voltage
  9. A0: Address Input Bit 0
  10. A1: Address Input Bit 1
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection

Functional Features

  • Allows multiple I2C devices to be connected to a single I2C bus
  • Enables individual selection of I2C channels using enable inputs (EN0 and EN1)
  • Bidirectional voltage-level translation between different I2C buses
  • Supports various I2C bus speeds for compatibility with different devices
  • Low standby current consumption for power efficiency

Advantages and Disadvantages

Advantages: - Simplifies I2C bus management by allowing multiple devices to share a single bus - Provides flexibility in connecting and controlling multiple I2C devices - Supports different I2C bus speeds, enhancing compatibility with various devices - Low standby current consumption helps conserve power

Disadvantages: - Limited to 2 channels, which may not be sufficient for complex systems with numerous I2C devices - Requires careful consideration of address assignment to avoid conflicts when multiple multiplexers are used in the same system

Working Principles

The PCA9543AD,118 is an I2C multiplexer that allows multiple I2C devices to share a single I2C bus. It operates by selectively connecting one of the two channels to the I2C bus based on the enable inputs (EN0 and EN1). When a particular channel is enabled, the corresponding serial data line (SDA) and serial clock line (SCL) are connected to the I2C bus, allowing communication with the selected device.

Detailed Application Field Plans

The PCA9543AD,118 finds applications in various scenarios where multiple I2C devices need to be connected to a single I2C bus. Some potential application fields include:

  1. Embedded Systems: Used in microcontroller-based systems to connect multiple sensors, actuators, and other peripheral devices.
  2. Industrial Automation: Enables efficient communication between multiple I2C-based industrial sensors and control systems.
  3. Internet of Things (IoT): Facilitates connectivity and control of multiple I2C devices in IoT applications, such as smart home automation.
  4. Automotive Electronics: Allows integration of various I2C-based automotive components, including sensors, displays, and control modules.

Detailed and Complete Alternative Models

  1. PCA9544A,118: 4-channel I2C multiplexer with the same package and characteristics as PCA9543AD,118.
  2. TCA9542A,118: 2-channel I2C multiplexer with similar features but a different package (SOIC).

These alternative models offer similar functionality to the PCA9543AD,118 and can be considered based on specific requirements and availability.

Word count: 515 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af PCA9543AD,118 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of PCA9543AD,118:

1. What is PCA9543AD,118? PCA9543AD,118 is a multiplexer/demultiplexer IC (Integrated Circuit) that allows multiple I2C devices to share the same I2C bus.

2. How does PCA9543AD,118 work? PCA9543AD,118 has three address pins that can be used to select one of the eight available channels. It routes the I2C signals from the selected channel to the common I2C bus.

3. What is the purpose of using PCA9543AD,118 in a technical solution? PCA9543AD,118 is used when there is a need to connect multiple I2C devices to a single I2C bus, but each device has a unique I2C address.

4. How many channels does PCA9543AD,118 have? PCA9543AD,118 has eight channels, allowing you to connect up to eight different I2C devices.

5. Can PCA9543AD,118 be used for bidirectional communication? Yes, PCA9543AD,118 supports bidirectional communication between the I2C master and the selected I2C device on the chosen channel.

6. What is the maximum operating frequency of PCA9543AD,118? The maximum operating frequency of PCA9543AD,118 is 400 kHz.

7. Can PCA9543AD,118 be cascaded to support more than eight channels? Yes, multiple PCA9543AD,118 ICs can be cascaded together to support more than eight channels.

8. Does PCA9543AD,118 require external pull-up resistors? Yes, PCA9543AD,118 requires external pull-up resistors on the I2C bus lines.

9. What is the supply voltage range for PCA9543AD,118? The supply voltage range for PCA9543AD,118 is typically between 2.3V and 5.5V.

10. Can PCA9543AD,118 be used in automotive applications? Yes, PCA9543AD,118 is AEC-Q100 qualified, making it suitable for automotive applications.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.