NXP USA Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
PCA9545APW,112
Se detaljer DataSheets

PCA9545APW,112

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: I2C Multiplexer
  • Characteristics: Low-voltage, 4-channel multiplexer with I2C interface
  • Package: TSSOP-24
  • Essence: Allows multiple I2C devices to share a single I2C bus
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • I2C Bus Compatibility: Standard-mode, Fast-mode, Fast-mode Plus, and High-speed mode
  • Channel Selection: Software-controlled through I2C interface
  • Standby Current: 1µA maximum
  • Address Selection: Three hardware address pins for up to eight devices on the same bus

Detailed Pin Configuration

The PCA9545APW,112 has a total of 24 pins in a TSSOP package. The pin configuration is as follows:

  1. SDA - Serial Data Input/Output
  2. SCL - Serial Clock Input
  3. A0 - Hardware Address Bit 0
  4. A1 - Hardware Address Bit 1
  5. A2 - Hardware Address Bit 2
  6. EN - Enable Input
  7. GND - Ground
  8. NC - No Connection
  9. NC - No Connection
  10. NC - No Connection
  11. NC - No Connection
  12. NC - No Connection
  13. NC - No Connection
  14. NC - No Connection
  15. NC - No Connection
  16. NC - No Connection
  17. NC - No Connection
  18. NC - No Connection
  19. NC - No Connection
  20. NC - No Connection
  21. NC - No Connection
  22. NC - No Connection
  23. VCC - Supply Voltage
  24. SDA - Serial Data Input/Output

Functional Features

  • Allows multiple I2C devices to be connected to a single I2C bus
  • Software-controlled channel selection through the I2C interface
  • Low-voltage operation, compatible with a wide range of systems
  • Supports various I2C bus speeds for flexibility in system design
  • Standby mode minimizes power consumption when not in use
  • Hardware address pins enable up to eight devices on the same bus

Advantages and Disadvantages

Advantages: - Simplifies I2C bus management by enabling multiple devices to share a single bus - Flexible channel selection through software control - Wide operating voltage range allows compatibility with different systems - Low standby current reduces power consumption

Disadvantages: - Limited to four channels, may not be suitable for applications requiring more channels - Requires additional I2C communication overhead for channel selection

Working Principles

The PCA9545APW,112 is an I2C multiplexer that allows multiple I2C devices to share a single I2C bus. It operates by selectively connecting one of the four input channels to the output channel, which is connected to the I2C bus. The channel selection is controlled through the I2C interface, allowing software to choose the desired channel.

When a specific channel is selected, the corresponding I2C signals (SDA and SCL) from the selected channel are routed to the output channel, enabling communication with the desired device. This enables efficient utilization of the I2C bus and simplifies the management of multiple I2C devices in a system.

Detailed Application Field Plans

The PCA9545APW,112 finds applications in various fields where multiple I2C devices need to be connected to a single I2C bus. Some potential application areas include: - Industrial automation systems - Consumer electronics - Automotive electronics - Medical devices - Internet of Things (IoT) devices

In industrial automation systems, the PCA9545APW,112 can be used to connect multiple sensors, actuators, and control modules to a central controller through a single I2C bus. This simplifies the wiring and reduces the number of I2C interfaces required in the system.

In consumer electronics, the multiplexer can be utilized to connect different peripheral devices, such as displays, touch panels, and audio modules, to a microcontroller or system-on-chip (SoC). This allows for efficient utilization of the limited I2C interfaces available on these devices.

Automotive electronics often require multiple I2C devices, such as sensors, communication modules, and display units, to be connected to a central control unit. The PCA9545APW,112 enables the consolidation of these devices onto a single I2C bus, reducing wiring complexity and improving system reliability.

Medical devices, including patient monitoring systems, diagnostic equipment, and laboratory instruments, can benefit from the use

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af PCA9545APW,112 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of PCA9545APW,112:

1. What is PCA9545APW,112? PCA9545APW,112 is a multiplexer/demultiplexer IC (Integrated Circuit) that allows multiple devices to share a single I2C bus.

2. How many channels does PCA9545APW,112 have? PCA9545APW,112 has 4 channels, which means it can connect up to 4 different I2C devices.

3. How do I select a specific channel on PCA9545APW,112? You can select a specific channel by writing the corresponding channel number to the control register of PCA9545APW,112.

4. Can PCA9545APW,112 be used for bidirectional communication? Yes, PCA9545APW,112 supports bidirectional communication between the master device and the selected slave device on a specific channel.

5. What is the maximum operating frequency of PCA9545APW,112? The maximum operating frequency of PCA9545APW,112 is typically 400 kHz.

6. Can PCA9545APW,112 be cascaded with other multiplexers? Yes, PCA9545APW,112 can be cascaded with other PCA9545A devices to expand the number of available channels.

7. Does PCA9545APW,112 require external pull-up resistors? Yes, PCA9545APW,112 requires external pull-up resistors on the I2C bus lines.

8. What is the power supply voltage range for PCA9545APW,112? The power supply voltage range for PCA9545APW,112 is typically 2.3V to 5.5V.

9. Can PCA9545APW,112 be used in automotive applications? Yes, PCA9545APW,112 is suitable for automotive applications as it can operate within the specified temperature range and has ESD protection.

10. What are some typical applications of PCA9545APW,112? Some typical applications of PCA9545APW,112 include I2C bus expansion, sensor networks, and multi-channel communication systems.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and application notes of PCA9545APW,112 for detailed information.