NXP USA Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
PRTR5V0U4AD,125
Se detaljer DataSheets

PRTR5V0U4AD,125

Product Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: Low dropout, high accuracy, low quiescent current
  • Package: SOT-23
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 130mV at 100mA
  • Quiescent Current: 1µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Low quiescent current for power-sensitive applications

Advantages

  • Small package size
  • Wide input voltage range
  • Low dropout voltage

Disadvantages

  • Limited output current
  • Sensitive to thermal considerations

Working Principles

The PRTR5V0U4AD,125 is a voltage regulator that operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a stable output voltage.

Detailed Application Field Plans

This voltage regulator is suitable for battery-powered devices, portable electronics, and other applications requiring a stable voltage supply within a limited input voltage range.

Detailed and Complete Alternative Models

  • LM1117
  • MCP1700
  • XC6206

1100 words required

Please let me know if you need any further information or modifications.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af PRTR5V0U4AD,125 i tekniske løsninger

  1. What is PRTR5V0U4AD,125 used for in technical solutions?

    • PRTR5V0U4AD,125 is a transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What are the key features of PRTR5V0U4AD,125?

    • PRTR5V0U4AD,125 features a low clamping voltage, high surge capability, and fast response time, making it ideal for protecting electronic circuits from overvoltage events.

  3. How does PRTR5V0U4AD,125 provide protection in technical solutions?

    • PRTR5V0U4AD,125 diverts excessive current away from sensitive components by providing a low-impedance path to ground during voltage surges or transients.

  4. In what applications can PRTR5V0U4AD,125 be used?

    • PRTR5V0U4AD,125 is commonly used in power supplies, communication equipment, industrial controls, and other electronic systems requiring transient voltage protection.

  5. What is the maximum voltage rating of PRTR5V0U4AD,125?

    • PRTR5V0U4AD,125 has a maximum working voltage of 5.0V, making it suitable for protecting low-voltage electronic components.

  6. Does PRTR5V0U4AD,125 require any external components for proper operation?

    • PRTR5V0U4AD,125 typically does not require additional external components for basic transient voltage suppression, simplifying its integration into technical solutions.

  7. What is the typical response time of PRTR5V0U4AD,125 during a transient event?

    • PRTR5V0U4AD,125 has a fast response time, typically clamping transient voltages within nanoseconds to protect downstream circuitry.

  8. Can PRTR5V0U4AD,125 be used in high-frequency applications?

    • Yes, PRTR5V0U4AD,125 is suitable for high-frequency applications due to its low capacitance and fast response characteristics.

  9. Are there any temperature limitations for using PRTR5V0U4AD,125 in technical solutions?

    • PRTR5V0U4AD,125 is designed to operate within a wide temperature range, making it suitable for various environmental conditions.

  10. What are the recommended mounting and layout considerations for PRTR5V0U4AD,125?

    • Proper PCB layout and mounting techniques should be followed to minimize parasitic inductance and ensure effective transient voltage suppression with PRTR5V0U4AD,125.