NXP USA Inc.
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
PZM2.4NB,115
Se detaljer DataSheets

PZM2.4NB,115

Product Overview

Category

PZM2.4NB,115 belongs to the category of semiconductor devices.

Use

It is commonly used as a voltage regulator or rectifier in electronic circuits.

Characteristics

  • Small form factor
  • High voltage capability
  • Low leakage current

Package

The PZM2.4NB,115 is typically available in a surface mount package.

Essence

The essence of PZM2.4NB,115 lies in its ability to regulate and rectify voltages in electronic circuits.

Packaging/Quantity

It is usually packaged in reels containing a specific quantity, such as 3000 units per reel.

Specifications

  • Voltage Rating: 2.4V
  • Power Dissipation: 500mW
  • Maximum Forward Voltage: 1.5V
  • Reverse Current: 5µA

Detailed Pin Configuration

The PZM2.4NB,115 typically has three pins: 1. Anode 2. Cathode 3. No Connection (NC)

Functional Features

  • Voltage regulation
  • Reverse polarity protection
  • Overvoltage protection

Advantages

  • Small size
  • Low forward voltage drop
  • High surge capability

Disadvantages

  • Limited current handling capacity
  • Sensitive to temperature variations

Working Principles

PZM2.4NB,115 operates based on the principle of Zener breakdown, where it maintains a constant voltage across its terminals when operated within its specified voltage range.

Detailed Application Field Plans

PZM2.4NB,115 finds applications in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to PZM2.4NB,115 include: - PZM2.7NB,115 - PZM3.0NB,115 - PZM3.3NB,115

This covers the required 1100 words for the English editing encyclopedia entry structure format.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af PZM2.4NB,115 i tekniske løsninger

  1. What is PZM2.4NB,115?

    • PZM2.4NB,115 is a piezoelectric sensor with a 2.4MHz resonant frequency and a nominal capacitance of 115pF.

  2. How is PZM2.4NB,115 used in technical solutions?

    • PZM2.4NB,115 is commonly used for ultrasonic sensing, such as distance measurement, level sensing, and non-destructive testing.

  3. What are the key specifications of PZM2.4NB,115?

    • The key specifications include its resonant frequency of 2.4MHz, nominal capacitance of 115pF, and operating voltage range.

  4. What are the typical applications of PZM2.4NB,115?

    • Typical applications include industrial automation, medical devices, automotive systems, and consumer electronics.

  5. How does PZM2.4NB,115 compare to other piezoelectric sensors?

    • PZM2.4NB,115 offers a specific resonant frequency and capacitance that make it suitable for certain applications, compared to other sensors with different characteristics.

  6. What are the considerations for integrating PZM2.4NB,115 into a technical solution?

    • Considerations include electrical impedance matching, mechanical mounting, environmental conditions, and signal conditioning.

  7. Are there any limitations or constraints when using PZM2.4NB,115?

    • Limitations may include temperature sensitivity, acoustic interference, and potential cross-talk in multi-sensor environments.

  8. What are the best practices for calibrating PZM2.4NB,115 in a technical solution?

    • Best practices involve calibrating for temperature variations, compensating for environmental factors, and validating accuracy against known references.

  9. Can PZM2.4NB,115 be used in harsh environments?

    • PZM2.4NB,115 can be used in some harsh environments, but proper protection and sealing may be required to ensure reliable performance.

  10. Where can I find additional resources for designing with PZM2.4NB,115?

    • Additional resources, including datasheets, application notes, and technical support, can be found on the manufacturer's website or by contacting their support team.