ON Semiconductor
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
MC14511BF
Se detaljer DataSheets

MC14511BF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Logic
  • Characteristics: High-speed, CMOS technology
  • Package: DIP (Dual In-line Package)
  • Essence: 4-bit synchronous binary counter
  • Packaging/Quantity: Available in tubes of 25 units

Specifications

  • Supply Voltage: 3V to 18V
  • Operating Temperature: -55°C to +125°C
  • Logic Family: CMOS
  • Number of Pins: 16
  • Clock Frequency: Up to 10MHz

Pin Configuration

The MC14511BF has a total of 16 pins. The pin configuration is as follows:

  1. Clock Input (CLK)
  2. Reset Input (RST)
  3. Enable Input (EN)
  4. Carry Output (CO)
  5. Data Input A (DA)
  6. Data Input B (DB)
  7. Data Input C (DC)
  8. Data Input D (DD)
  9. Data Output A (QA)
  10. Data Output B (QB)
  11. Data Output C (QC)
  12. Data Output D (QD)
  13. Ripple Blanking Input (RB)
  14. Lamp Test Input (LT)
  15. VCC (Positive Power Supply)
  16. Ground (GND)

Functional Features

  • Synchronous operation with clock input
  • Reset and enable inputs for control
  • Outputs provide binary count from 0 to 15
  • Carry output for cascading multiple counters
  • Ripple blanking input for noise immunity
  • Lamp test input for testing purposes

Advantages and Disadvantages

Advantages: - High-speed operation - Wide supply voltage range - Compact DIP package - Low power consumption

Disadvantages: - Limited count range (0 to 15) - Not suitable for complex counting applications

Working Principles

The MC14511BF is a 4-bit synchronous binary counter. It counts from 0 to 15 based on the clock input. The counter can be reset to 0 using the reset input and can be enabled or disabled using the enable input. The outputs provide the binary count in four separate lines. The carry output allows cascading multiple counters for larger count ranges. The ripple blanking input helps in reducing noise interference, while the lamp test input facilitates testing of the counter.

Application Field Plans

The MC14511BF can be used in various digital logic applications, including: - Frequency division - Event counting - Timekeeping - Industrial automation - Electronic games - Digital displays

Alternative Models

Some alternative models that offer similar functionality to the MC14511BF are: - CD4511BCN - SN74LS191N - HEF40192BP - MM74HC393N

These models can be considered as alternatives depending on specific requirements and availability.

Word Count: 275 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af MC14511BF i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of MC14511BF in technical solutions:

  1. Question: What is MC14511BF?
    Answer: MC14511BF is a CMOS integrated circuit that consists of a 4-bit synchronous binary counter and a 4-to-16 line decoder.

  2. Question: What is the purpose of MC14511BF?
    Answer: MC14511BF is commonly used for various applications such as data encoding, address decoding, multiplexing, and demultiplexing.

  3. Question: How many inputs does MC14511BF have?
    Answer: MC14511BF has 4 input pins (A, B, C, D) which can be used to set the desired binary count.

  4. Question: How many outputs does MC14511BF have?
    Answer: MC14511BF has 16 output pins (Y0-Y15) which correspond to the 16 possible combinations of the 4-bit binary count.

  5. Question: Can MC14511BF be cascaded to increase the number of outputs?
    Answer: Yes, multiple MC14511BF ICs can be cascaded together to increase the number of outputs by connecting the carry-out pin of one IC to the carry-in pin of the next IC.

  6. Question: What is the maximum clock frequency supported by MC14511BF?
    Answer: The maximum clock frequency supported by MC14511BF is typically around 6 MHz.

  7. Question: Can MC14511BF be used with both TTL and CMOS logic levels?
    Answer: Yes, MC14511BF is compatible with both TTL and CMOS logic levels, making it versatile for use in different systems.

  8. Question: What is the power supply voltage range for MC14511BF?
    Answer: The power supply voltage range for MC14511BF is typically between 3V and 18V.

  9. Question: Does MC14511BF have any built-in protection features?
    Answer: Yes, MC14511BF has built-in protection against electrostatic discharge (ESD) and excessive power dissipation.

  10. Question: Can MC14511BF be used in both digital and analog applications?
    Answer: MC14511BF is primarily designed for digital applications, but it can also be used in certain analog applications such as signal conditioning or level shifting.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.